Description
Moog G771K200A High-Flow Two-Stage Electro-Hydraulic Servo Valve
Product Core Introduction
The Moog G771K200A (part number H19FOFA4V14, catalog ID 177323) is a high-performance two-stage flow control electro-hydraulic servo valve belonging to Moog’s G771K series. It converts low-power electrical command signals into precisely regulated high-flow hydraulic output, delivering exceptional dynamic response and positioning accuracy for heavy-duty industrial motion control systems.
Designed for extreme operating conditions, this valve features a robust industrial-grade construction with integrated LVDT (Linear Variable Differential Transformer) position feedback for closed-loop spool position monitoring. It is widely deployed in steel production roll gap positioning, offshore marine dynamic positioning thruster control, heavy crane load-sensing systems, and large test bench motion simulation applications, where zero drift and ultra-stable long-term operation are critical.

G771K200A
Primary Technical Specifications
- Official Part Number: G771K200A (H19FOFA4V14)
- Product Family: Moog G771K Series High-Flow Servo Valves
- Valve Stage Configuration: Two-stage flow control servo valve with integrated LVDT spool position feedback
- Rated Flow Capacity: 200 L/min (at 70 bar pressure drop across the valve)
- Input Signal Compatibility: Standard ±10 mA analog command signal, with built-in signal conditioning
- Maximum Operating Pressure: 350 bar (5000 psi)
- Hysteresis Performance: < 0.5% of full scale, ensuring minimal signal-to-output deviation
- Environmental Rating: IP65 protection grade, operating temperature range -20°C to +80°C
- Mounting Standard: SAE J518 Code 61 (ISO 6162-1) flange mounting interface
- Hydraulic Fluid Compatibility: Designed for use with ISO VG 32, VG 46 anti-wear hydraulic oils
- Filtering Requirement: Mandatory 3 μm absolute filtration on the pressure supply line
- Dynamic Response: -3dB frequency response ≥ 120 Hz, phase lag ≤ 90° at 100 Hz
Quality Control Procedures
Every Moog G771K200A unit undergoes strict global standard quality assurance before factory release:
- Component Incoming Validation: All torque motors, precision spool-sleeve assemblies and LVDT sensors are 100% inspected against Moog aerospace-grade component specifications, with full lot traceability.
- 400-Hour Endurance Testing: Each completed valve runs continuous full-stroke cycling testing per ISO 10771-1 standards, screening for early-age wear or seal failure.
- Performance Calibration: Every unit is dynamically calibrated on a dedicated servo valve test rig, verifying flow linearity, hysteresis, frequency response and zero drift across the full operating pressure range.
- Contamination Resistance Validation: Units pass rigorous contamination tolerance testing, confirming stable operation even under transient hydraulic fluid contamination conditions.
- Final Leakage Inspection: All ports are pressure-tested for internal and external leakage, before being sealed in shock-absorbing anti-static packaging with a unique serial number linked to its full test and calibration record.
Related Model Recommendations
- Moog G771K201A: Variant with customized flow characteristic curve for specific press machine closed-loop force control applications
- Moog G771K202A: Low-temperature hardened variant, optimized for outdoor arctic region hydraulic system operation
- Moog G761-3005: Higher flow capacity 300 L/min two-stage servo valve, for larger hydraulic actuator drive requirements
- Moog D661 Series: Advanced digital two-stage servo valve with fieldbus communication interface, for modern distributed control system integration
- Moog G774K150A: Compact flange-mounted high-flow servo valve, for limited installation space retrofit projects
- Moog ServoStar DDV: Direct drive digital valve controller, for ultra-high precision micro-flow control applications
- Moog VFS5000: Professional servo valve test and calibration platform, for on-site maintenance and periodic performance verification
- Moog RKP Hydraulic Unit: Redundant high-pressure hydraulic power supply system, perfectly matched for critical servo valve loop applications
Brand Development History
Moog Inc. has been the global undisputed technology leader in precision motion control and electro-hydraulic servo systems for over 70 years, with deep accumulated expertise in aerospace, defense and heavy industrial high-precision control fields.
In the 1990s, Moog launched the G771K series high-flow industrial servo valve family, specifically designed to meet the growing demand for high-response, high-reliability hydraulic control in large steel mills, offshore platforms and heavy industrial equipment. The G771K200A quickly became the best-selling model in this series, setting the industry benchmark for 200 L/min flow class servo valves.
In the 2010s, the platform received a major upgrade with the addition of integrated LVDT closed-loop spool feedback, drastically improving long-term zero stability and anti-interference performance. Today, hundreds of thousands of G771K series valves are deployed worldwide, delivering reliable precision control performance for critical industrial hydraulic systems.
Frequently Asked Questions
- Q: What is the most common failure mode for the G771K200A in long-term industrial operation?
A: The most frequent issue is spool blockage caused by hydraulic fluid contamination. This can be prevented by strictly maintaining 3 μm absolute filtration on the supply line and replacing filter elements every 250 operating hours. -
A: Yes, the is the direct upgraded successor to the legacy G771K200, maintaining full mechanical mounting, electrical signal and hydraulic performance compatibility, no system reconfiguration is required during replacement. - Q: What is the recommended maintenance schedule for this servo valve?
A: It is recommended to perform LVDT feedback calibration every 6 months, conduct a full stroke performance test every 6 months, and flush the valve with ISO VG 46 hydraulic fluid after any system contamination event. - Q: What is the proper installation torque for the SAE J518 Code 61 flange bolts?
A: The flange mounting bolts must be torqued to 180 Nm ±5% in a diagonal sequence, to ensure uniform sealing force and prevent internal leakage. - Q: What is the typical service life expectancy of this valve under normal industrial operating conditions?
A: With proper fluid maintenance and periodic calibration, the can reliably operate for over 10 years in 24/7 heavy industrial hydraulic system applications.

