EATON MTL 9202-ETS Tofino Industrial Ethernet Security Appliance (2×Copper Ports)

  1. 9202-ETS-MC-SC (1 multimode fibre +1 copper)
  2. 9202-ETS-MM-SC (2 multimode fibre ports)
  3. 9202-ETS-SC-SC (1 singlemode fibre +1 copper)
  4. 9202-ETS-CC (Conformal coated 2 copper port version)
  5. 9522-MBT Modbus TCP Enforcer LSM
  6. 9524-ENIP EtherNet/IP Enforcer LSM
  7. 9202-ETX-M-SC Industrial media converter
  8. 9510-ELS Event Logger LSM

 

Category: SKU: EATON MTL 9202-ETS Brand:

Description

EATON MTL 9202-ETS Tofino Industrial Ethernet Security Appliance (2×Copper Ports)

 

Product Overview

The 9202-ETS is an industrial hardened ICS cybersecurity gateway/firewall under Eaton MTL Tofino series. It is deployed between security zones inside DCS, PLC and SCADA control networks to isolate control network segments, filter industrial protocol traffic and log security events. It adopts “Plug-n-Protect” design; no pre-configuration or network modification required at power-up. Users enable additional security functions by loading LSM (Loadable Security Modules), such as Modbus TCP Enforcer, Event Logger and NetConnect. It supports DIN rail cabinet mounting and ATEX hazardous area certification, widely used in power, oil & gas, petrochemical plants to meet IEC 62443, NERC CIP and ISA-99 industrial cybersecurity requirements. Optional conformal coating version available as 9202-ETS-CC.

9202-ETS

Key Technical Specifications

  • Part Number: 9202-ETS
  • Manufacturer: EATON MTL (Crouse-Hinds series)
  • Product Type: Tofino Industrial Security Appliance
  • Ethernet Ports: 2 × RJ45 copper 10/100Mbps
  • Power Supply: 10–30 VDC, redundant power input
  • Power Consumption: ~2.0W
  • Mounting: DIN rail mount
  • Enclosure: Rugged metal housing
  • Configuration Port: USB front port (for temporary configuration only)
  • Relay Contact: Fault relay (max 1A resistive load, up to 60VDC / 30VAC SELV)
  • Ambient Temp: Standard version: 0°C ~ +60°C; extended T/E version: -40°C ~ +70°C
  • Humidity: 5–95% non-condensing
  • Certification: CE, FCC, ATEX DEKRA 15ATEX0075X II 3 G Ex nA IIC T4 Gc, UL
  • Supported Protocols: Modbus TCP, OPC, DNP3, EtherNet/IP, etc.
  • Management Software: Free Tofino Configurator
  • Features: Built-in firewall, event logging, test mode (safe offline policy simulation)
  • Protection: Surge & transient protection for industrial environments

 

Recommended 8 Similar Series Models (MTL Tofino family)

  1. 9202-ETS-MC-SC (1 multimode fibre +1 copper)
  2. 9202-ETS-MM-SC (2 multimode fibre ports)
  3. 9202-ETS-SC-SC (1 singlemode fibre +1 copper)
  4. 9202-ETS-CC (Conformal coated 2 copper port version)
  5. 9522-MBT Modbus TCP Enforcer LSM
  6. 9524-ENIP EtherNet/IP Enforcer LSM
  7. 9202-ETX-M-SC Industrial media converter
  8. 9510-ELS Event Logger LSM

 

Quality Control & Test Standard Operating Procedure (SOP)

  1. Visual Inspection: Inspect metal casing, front panel LED indicators, RJ45/USB connectors, terminal block and product label. Check casing damage, connector pin bending or corrosion, confirm part marking 9202-ETS.
  2. Continuity & Isolation Test: Check fault relay contact continuity; insulation resistance test between power terminals and Ethernet signal circuits.
  3. Power-Up Functional Test: Apply 10–30VDC redundant power supply, verify power consumption, LED power-up sequence, no overheating.
  4. Basic Network Interface Test: Connect two Ethernet ports to test switch, verify link negotiation 10/100Mbps.
  5. Firewall & Policy Test: Use Tofino Configurator to load LSM modules, test firewall filtering rules and test mode function.
  6. Fault Relay Simulation: Simulate device fault state, verify fault relay switching status.
  7. Event Logging Test: Generate network events, confirm events recorded in onboard event logger and syslog upload.
  8. ATEX / Surge check (bench optional): Verify transient surge protection performance.
  9. Environmental Burn-in Test: Powered burn-in under rated ambient temperature for screening early component failure.
  10. Final Recheck & Documentation: Repeat port and firewall function test, generate serial-number traceable test report before anti-static packaging.

 

New Module Installation Guide

  1. Pre-Install Preparation: Execute LOTO procedure for control cabinet. Wear ESD wrist strap. Confirm model 9202-ETS matches network zone segmentation requirement, prepare Tofino Configurator PC.
  2. DIN Rail Mount: Clip the appliance onto cabinet DIN rail and lock the mounting latch.
  3. Wiring Termination: Wire redundant 10–30VDC power supply and fault relay wiring. Separate power cable and Ethernet cables; implement proper shield grounding.
  4. Ethernet Cabling: Connect port 1 to upstream network zone, port2 to protected DCS/PLC control zone.
  5. Power Restore: Energize DC power. Check front panel POWER, NET, MODE LEDs for normal boot status.
  6. Commissioning & Policy Configuration: Connect temporary USB configuration, launch Tofino Configurator, activate required LSM security modules, define zone firewall rules, enable event log and syslog server.
  7. Test Mode Validation: Run policy test mode first to verify filtering rules without impacting live production. After validation switch to operational mode.
  8. Post-Installation Documentation: Backup configuration file, record serial number and security policy in plant cyber security maintenance log.

9202-ETS

Application Scenarios & Features

Application Scenarios

  • Power plant DCS/PLC network zone isolation (System800xA, Advant OCS, Mark VI/VIe)
  • Oil & gas, refinery and chemical process control ICS cybersecurity protection
  • SCADA / RTU network boundary protection, remote partner & wireless network access control
  • NERC CIP / IEC62443 / ISA99 compliance for industrial control networks
  • Protect ABB, GE, Siemens, Honeywell controllers and HMI from unauthorized network access

Core Features

  • Industrial DIN rail hardened firewall specifically designed for ICS control network
  • Plug-n-Protect, zero disruption to existing control network upon installation
  • Modular security via LSM loadable modules, select protocol enforcers on demand
  • Unique Test mode to validate firewall rules without risk to live process
  • Built-in event logging and syslog for audit and cybersecurity incident tracing
  • Redundant DC power input and hardware fault relay for alarm to plant DCS
  • ATEX certified for installation in hazardous area Zone 2
  • Native compatible with major DCS, PLC and SCADA platforms used in power & process plants

 

FAQ

Q1: What is LSM?

A1: LSM = Loadable Security Module. It is add-on software modules to enable specific security functions such as Modbus TCP protocol enforcement, event logging, network access control.

Q2: What is the difference between 9202-ETS and 9202-ETX?

A2: 9202-ETS is security firewall appliance. 9202-ETX is simple copper/fibre media converter without firewall security functions.

Q3: Can I hot-swap this unit online?

A3: Mechanical hot swap is possible, but removing it will break network communication between two security zones. Replace during safe plant maintenance window.

Q4: Is 9202-ETS SIL certified?

A4: It is ICS cybersecurity device, not SIL safety rated. SIL assessment applies to safety instrumented system (SIS) hardware.

Q5: What is the purpose of fault relay?

A5: When the appliance hardware fails, relay changes contact state to send alarm signal to DCS/SCADA HMI.

Q6: What software do I use to configure?

A6: Free Tofino Configurator software, connected via front USB port (temporary connection only).

Q7: What is 9202-ETS-CC?

A7: CC = Conformal Coating version, for cabinet environments with high humidity, dust or corrosive gas.

Q8: Is this product still available?

A8: Eaton continues support for Tofino 9202-ETS series, spare units widely used in legacy power & petrochemical plant cybersecurity upgrade.