ABB PM866K01 AC 800M High-Performance Processor Unit

  • PM866AK02 (3BSE081637R1)‌: Fully redundant dual-CPU variant of PM866 series, with 2.7 kg total weight and <10 ms switchover time for zero-downtime critical applications
  • ‌PM867K01‌: High-integrity 64 MB CPU with identical 0.09 ms execution performance, designed for SIL2/SIL3 safety loop integration
  • ‌PM891K01‌: Top-tier 450 MHz 256 MB high-performance controller, delivering 0.043 ms logic execution speed for ultra-large scale complex control systems
  • ‌PM864AK01‌: Mid-range predecessor model with 0.15 ms execution performance, suitable for system upgrades with lower performance requirements
Category: SKU: ABB PM866K01 Brand:

Description

ABB PM866K01 AC 800M High-Performance Processor Unit‌

 

‌Product Core Introduction‌

The ‌ABB PM866K01‌ (corresponding to the official part number 3BSE050198R1) is a high-performance non-redundant CPU module belonging to ABB’s AC 800M controller family, natively compatible with the System 800xA DCS platform. Powered by a 133 MHz MPC866 processor, it delivers industry-leading logic execution speed and 64 MB of total memory, making it ideal for mid-to-large scale process automation applications that demand ultra-fast response and high I/O capacity. It supports seamless step-up migration from legacy PM861/PM861A controllers without major system reconfiguration.

 

‌Key Technical Specifications‌

 

Parameter Details
Processor 133 MHz MPC866
Logic Execution Performance 0.09 ms for 1000 Boolean operations
Total Memory 64 MB, with 51.389 MB RAM available for user applications
Power Supply 24 V DC (19.2 – 30 V DC), typical power consumption 210 mA, max 360 mA
Power Dissipation 5.1 W (max 8.6 W)
Communication Interfaces 2 × 10 Mbit/s Ethernet (IEEE 802.3, RJ45), 2 × RS-232C serial ports
Max I/O Capacity Up to 96 S800 I/O modules on Modulebus for single non-redundant configuration
CEX Bus Expansion Supports up to 12 additional communication modules
Operating Environment 0°C to +55°C, 5-95% non-condensing relative humidity, ISA G3 corrosion protection
Mechanical Dimensions 119 mm (W) × 186 mm (H) × 135 mm (D)
Weight (with baseplate) 1200 g
Protection Rating IP20, compliant with EN 60529
Certifications CE, UL 508, UL 60079-15 (Class 1 Div. 2 hazardous location certified)

 

‌Recommended Models from the Same Series‌

For users exploring alternative configurations or higher-performance options within the AC 800M controller portfolio:

  • ‌PM866AK02 (3BSE081637R1)‌: Fully redundant dual-CPU variant of PM866 series, with 2.7 kg total weight and <10 ms switchover time for zero-downtime critical applications
  • ‌PM867K01‌: High-integrity 64 MB CPU with identical 0.09 ms execution performance, designed for SIL2/SIL3 safety loop integration
  • ‌PM891K01‌: Top-tier 450 MHz 256 MB high-performance controller, delivering 0.043 ms logic execution speed for ultra-large scale complex control systems
  • ‌PM864AK01‌: Mid-range predecessor model with 0.15 ms execution performance, suitable for system upgrades with lower performance requirements

 

‌Professional Quality Control & Testing SOP‌

  1. ‌Processor & Memory Validation‌: Full functional testing of the MPC866 core and 64 MB memory to eliminate data read/write errors
  2. ‌Communication Burn-In‌: 72-hour continuous connectivity test across all Ethernet and serial ports to verify zero packet loss
  3. ‌Environmental Stress Screening‌: Temperature cycling (-10°C to +60°C) and 10-55Hz vibration testing per IEC 60068 standards
  4. ‌Isolation & Safety Test‌: 500 V AC dielectric withstand test to confirm compliance with reinforced insulation requirements
  5. ‌Final Performance Calibration‌: Precision verification of 0.09 ms Boolean operation execution speed against factory reference standards

 

‌New Module Installation Guidelines‌

  1. ‌Pre-Installation Check‌: Confirm compatibility with your System 800xA version, and verify the 24 V DC power supply meets the 19.2-30 V DC input range
  2. ‌DIN Rail Mounting‌: Use the built-in slide & lock mechanism to secure the module on standard 35 mm DIN rail, maintain ≥20 mm clearance around the unit for heat dissipation
  3. ‌Wiring‌: Connect Ethernet control network cables to CN1/CN2 ports, and use shielded RS-232 cables for COM3/COM4 serial interfaces, strictly separating them from high-voltage power lines
  4. ‌Terminator Installation‌: Attach the included TB850 CEX-bus terminator and TB807 ModuleBus terminator to the end of the respective expansion buses
  5. ‌Post-Installation Test‌: Power on the module, verify all status LEDs indicate normal operation, then download the control application via Control Builder to confirm full system synchronization

 

‌Application Scenarios & Key Features‌

  • ‌Application Scenarios‌:
    • Petrochemical refineries: Large-scale DCS process control for continuous production lines
    • Power generation plants: Turbine and boiler sequence control in thermal and hydroelectric facilities
    • Pulp & paper manufacturing: High-speed motion and process control for paper machine production lines
    • Water treatment plants: Distributed control for large-scale water purification and distribution systems
  • ‌Key Features‌:
    • Industry-leading 0.09 ms Boolean execution speed, supporting up to 32 independent application programs with minimum 1 ms cycle time
    • Dual redundant 10 Mbit/s Ethernet ports, ensuring uninterrupted control network communication
    • Native full compatibility with ABB System 800xA, supporting one-click tag import and seamless alarm integration
    • Hot-swap support for all connected CEX-bus communication modules, enabling maintenance without system shutdown
    • ISA Secure certified, providing robust cybersecurity protection against unauthorized access to control logic

 

‌Frequently Asked Questions (FAQs)‌

‌Q1: Can PM866K01 directly replace an older PM861 controller?‌
A: Yes, it supports official step-up migration from PM861/PM861A, requiring no modification to existing I/O wiring or field devices.

‌Q2: What is the maximum number of S800 I/O modules it can support?‌
A: A single non-redundant PM866K01 can drive up to 96 S800 I/O modules on the Modulebus, covering most mid-to-large process control system I/O requirements.

‌Q3: Does this module support SIL-rated safety applications?‌
A: For SIL2/SIL3 safety loops, you need to pair it with ABB SM811/SM812 high-integrity safety CPU modules to form a certified 1oo2D safety control architecture.

‌Q4: What is the built-in battery used for?‌
A: The integrated 3.6 V lithium backup battery preserves RAM data during unexpected power outages, preventing application loss when the main power supply fails.