Description
ZYGO ZMI2002 Dual-Axis 6U VME Interferometry Measurement Board
Product Overview
The ZYGO ZMI2002 (part number 8020-0211) is a high-precision dual-axis interferometry measurement board in 6U VME form factor, developed by ZYGO (now part of AMETEK) for ultra-high accuracy displacement and position metrology applications. Built on ZYGO’s industry-leading heterodyne laser interferometry technology, it integrates two independent measurement channels on a single board, drastically reducing backplane slot usage compared to legacy single-axis solutions. It supports seamless daisy-chaining of multiple units to scale up to 16 synchronized measurement axes at full 7.7MHz sampling rate, making it the core electronic component for precision motion control in semiconductor manufacturing and other nanometer-level accuracy industrial scenarios.

ZYGO ZMI-2002 8020-0211-1-J
Technical Specifications
| Parameter Category | Detailed Specification |
|---|---|
| Manufacturer | ZYGO (subsidiary of AMETEK) |
| Product Type | Dual-Axis Heterodyne Interferometry Measurement Board |
| Form Factor | 6U VME standard industrial board |
| Part Number Variants | 8020-0211, 8020-0211-1-J |
| Maximum Sampling Rate | 7.7 MHz per channel, supports 16 axes synchronized at full rate |
| Position Data Format | 36-bit high-resolution position output |
| Time Resolution | 25 nanoseconds for ultra-precise timestamping of measurement points |
| Power Requirement | +5V DC ±5%, 3.5A typical operating current |
| Supported Interfaces | VME bus, ISA bus, P2 high-speed daisy-chain interface |
| Core Technology | Heterodyne laser interferometry signal processing, converting optical interference signals into digital displacement readings |
| Operating Temperature Range | 0°C to +55°C, standard industrial precision equipment rating |
| Installation Method | Direct plug-in to standard 6U VME industrial control rack backplane |
| System Compatibility | Fully compatible with ZYGO ZMI series laser sources and interferometer optical heads |
| Measurement Accuracy | Sub-nanometer level displacement resolution, traceable to international laser wavelength metrology standards |
8 Recommended Related ZYGO Models
- ZYGO ZMI-1000 – Single-axis VME interferometry measurement board, cost-effective for basic 1-axis precision positioning applications
- ZYGO ZMI-3004 – 4-axis high-density interferometry board, optimized for multi-axis precision motion platforms with limited rack space
- ZYGO ZMI Laser Source Unit – Dedicated heterodyne laser transmitter, the mandatory optical signal source paired with ZMI2002 measurement board
- ZYGO ZMI Interferometer Optical Head – Non-contact displacement sensing optical component, capturing interference signals for ZMI2002 processing
- ZYGO ZMI-7700 – Latest generation 7-axis interferometry measurement system, delivering higher sampling rate and expanded axis capacity for advanced semiconductor lithography equipment
- ZYGO MetroPro Software Suite – Official metrology analysis software, enabling full measurement data visualization, parameter configuration and precision calibration for ZMI2002
- ZYGO 8070-0001 – VME bus extension backplane, supporting daisy-chaining of up to 8 ZMI2002 boards for 16-axis synchronized measurement
- ZYGO ZMI Environmental Compensation Module – Real-time air temperature, pressure and humidity sensor unit, automatically correcting measurement errors caused by environmental refractive index changes
Compatibility Notes & Critical Installation Pitfalls
- Optical Signal Alignment Requirement: The cannot output valid readings if the incident laser beam on the interferometer head is misaligned by more than 0.5 degrees; strict optical path alignment calibration is mandatory before power-on
- VME Bus Slot Restriction: The board must be installed in a 6U VME backplane slot that supports full 32-bit data bus width; 16-bit only VME slots will cause data transmission truncation and measurement value drift
- Forbidden Hot-Swap: Never insert or remove the while the VME rack is powered on; live plugging will instantly burn out the high-speed FPGA chip on the board
- Laser Safety Protection: The paired ZYGO heterodyne laser source outputs Class 3R visible/near-infrared laser; direct eye exposure will cause permanent retinal damage, so laser safety goggles must be worn during optical path adjustment
- Grounding Isolation Mandatory: The board chassis grounding terminal must be connected to the independent precision measurement dedicated grounding grid; sharing grounding with high-power motion drivers will introduce electromagnetic interference leading to nanometer-level measurement jitter
- Daisy-Chain Cable Specification: Ordinary flat ribbon cables cannot be used for P2 interface daisy-chaining; only ZYGO-certified shielded high-speed differential cables guarantee 7.7MHz signal integrity across multiple connected boards
Standard Operating Procedure
- Pre-operation preparation: Fully back up the existing VME system configuration and measurement calibration parameters via the host industrial computer, confirm the ZYGO laser source is powered off and the optical path is blocked with safety baffles
- ESD safety processing: Wear certified anti-static gloves and wrist strap, release residual static charge by touching the grounded precision measurement platform chassis
- Old board removal: Unlock the VME slot ejector levers on both sides, pull the faulty smoothly out of the backplane, avoid bending or damaging the backplane gold pin connectors during operation
- New board verification: Verify the new part number and suffix code, confirm no physical damage exists on all interface terminals and the FPGA chip version matches the system software compatibility requirements
- Installation and wiring: Align the board with the VME slot guide rails, push it firmly into the backplane until fully seated, lock both ejector levers securely, then connect the P2 daisy-chain cable strictly following the original wiring diagram
- Power-on validation: Restore VME rack power, confirm the RUN LED indicator stays solid green, and the host system device manager correctly recognizes the measurement board
- Function calibration: Power on the ZYGO laser source, perform full optical path alignment and interferometer signal intensity calibration, validate the 25ns time resolution and 7.7MHz sampling rate meet system specifications
- Final documentation: Update the equipment maintenance log with the new board serial number and firmware version, create a new full measurement system calibration parameter backup and store it in two independent offline storage locations
Typical Application Scenarios
- Semiconductor lithography scanner stages, delivering nanometer-level real-time position feedback for wafer and reticle precision positioning
- High-precision CNC machine tool grating ruler replacement systems, achieving sub-micron level motion trajectory accuracy for ultra-precision machining
- Large-format coordinate measuring machines (CMM), providing non-contact long-travel displacement measurement for high-precision part inspection
- Flat panel display (FPD) glass substrate lithography platforms, ensuring multi-axis synchronous positioning accuracy during large-area pattern exposure
- Aerospace precision component testing laboratories, measuring micro-deformation of high-strength materials under extreme temperature and vibration conditions
- New energy lithium battery pole piece high-speed coating equipment, implementing real-time thickness and tension control via non-contact laser displacement measurement
Recommended Supporting Components
- ZYGO MetroPro metrology analysis software, enabling full parameter configuration, real-time data visualization and precision calibration
- ZYGO-certified shielded high-speed P2 daisy-chain cables, ensuring 7.7MHz signal integrity across multi-board synchronized measurement systems
- ZYGO Class 3R certified laser safety goggles, protecting operators from accidental laser exposure during optical path adjustment
- 6U VME industrial control rack with independent filtered power supply, providing stable +5V DC power and EMC protection for
- Industrial-grade ESD anti-static operation kit, protecting the high-speed FPGA mainboard from electrostatic damage during maintenance
- ZYGO environmental compensation sensor module, automatically correcting measurement errors caused by air temperature, pressure and humidity fluctuations in the operating environment



