Description
Woodward 8237-1246 ProTech-GII Bulkhead Mount Overspeed Protection System
Product Overview
The 8237-1246 is Woodward ProTech‑GII triple modular redundant (TMR) overspeed protection device for rotating machinery protection. It adopts 2-out-of-3 voting architecture with three independent measurement modules, dedicated for steam, gas and hydro turbine overspeed / overacceleration protection. It acquires pulse signals from magnetic pickups or proximity speed probes, calculates real-time shaft rotational speed, triggers safety trip relays when overspeed or over-acceleration conditions are detected. It includes speed readback output, event recording, built-in self-test and serial communication interface. The bulkhead mounting housing is designed for cabinet wall installation. It is widely used as critical spare protection unit for power generation, oil & gas rotating equipment protection systems.

Technical Parameters
| Item | Specification |
|---|---|
| Part Number | 8237-1246 |
| Manufacturer | Woodward |
| Series | ProTech-GII Overspeed Protection |
| Architecture | TMR 2oo3 voting, 3 independent modules |
| Mounting | Bulkhead wall mount |
| Speed Input | 3 channels (1 per module), supports passive MPU / active proximity probe |
| Measuring Range | 0.5 ~ 32000 rpm |
| Speed Accuracy | ±0.04% of measured speed (-20 ~ +60°C) |
| Trip Response Time | 12ms |
| Power Supply | 24VDC auxiliary power |
| Output | Voted trip relay outputs, isolated 4-20mA speed analog readback |
| Communication | RS232/485 serial port, Modbus protocol |
| Diagnostic | Continuous hardware self-test, sensor cable fault detection, on-line overspeed test function |
| Operating Temperature | -40°C ~ +70°C, non-condensing |
| Protection Class | IP20 |
| Weight | Approx. 2.7 kg |
Main Features
- Woodward ProTech-GII TMR overspeed protection system with 2oo3 voting logic for turbine and compressor safety protection.
- Three independent measurement channels, single channel fault will not cause spurious trip, eliminating single point failure risk.
- Supports passive magnetic pickup and active proximity probe input for rotational speed measurement.
- High-speed trip response (12ms), detects overspeed and overacceleration conditions and activates voted trip relays.
- Isolated 4-20mA analog output for real-time speed value transmission to DCS / HMI system.
- Built-in event sequence recording for trip event storage, convenient for post-fault analysis and root cause investigation.
- Supports on-line overspeed function test without machinery shutdown for regular proof testing.
- Serial Modbus communication for parameter configuration, status reading and alarm uploading.
- Bulkhead wall mounting structure, compact metal housing for industrial cabinet installation.
- OEM spare protection device for maintenance, spare inventory and retrofit of turbine and compressor safety systems.
Application & Industry Scenarios
Application Information
8237-1246 receives pulse signals from shaft speed pickups. Three independent modules measure speed simultaneously and perform 2oo3 voting calculation. When speed exceeds the preset trip threshold, the unit triggers voted safety relay output to shut down the rotating machine. It continuously monitors sensor and hardware health, reports faults to the plant control system, and records all speed and trip events. It serves as the independent overspeed protection layer for turbines and large compressors.
Typical Industries
- Thermal power plant steam/gas turbine overspeed protection
- Oil & gas large compressor safety protection systems
- Hydroelectric power water turbine machinery protection
- Petrochemical plant high-speed rotating equipment safety interlock
- Industrial power generation engine and turbine packages
- Marine turbo machinery overspeed protection
Matching / Supporting Components
- Magnetic pickup / proximity speed sensors
- Shielded signal cables for speed pickup wiring
- 24VDC redundant power supply unit
- Trip relay and solenoid valve assembly
- Woodward ProTech-GII configuration & diagnostic software
- DCS / HMI system for speed trend and alarm display
- Terminal blocks for field wiring termination
- Cabinet bulkhead mounting hardware
Related Woodward ProTech-GII Reference Models
- 8237-1598: Panel mount ProTech-GII variant
- 8237-2594: New hardware revision bulkhead mount model
- 9907-169: ProTech-GII display interface unit
- ProTech-GII: Woodward rotating machinery overspeed protection platform
- 8237-1247: Alternative TMR overspeed variant
- 5466-409: Woodward legacy overspeed protection module
- 2301D: Woodward speed governor controller
- SPM-D: Woodward synchronizer & protection module
