The Schneider Electric (Elau) C400/10/1/1/1/00 is a high-performance single-axis servo drive belonging to the Schneider PacDrive motion control platform

  1. C400/05/1/1/1/00: 5A continuous output current variant, optimized for small, low-inertia servo motor applications
  2. C400/15/1/1/1/00: 15A high-power output version, designed for large, high-torque servo motor driving requirements
  3. C400/10/2/1/1/00: Dual-axis servo drive variant, controlling two independent servo axes from a single compact unit
  4. C600/10/1/1/1/00: Next-generation PacDrive servo drive with expanded motion programming capacity and advanced safety functions
  5. VCA07AAAA0AA00: Official Schneider rebranded part number for the C400/10/1/1/1/00, fully hardware and firmware compatible
  6. Lexium 62: Schneider modern multi-axis servo system, offering higher performance and expanded axis count for large-scale motion control lines
  7. PacDrive 3: Elau/Schneider integrated motion controller platform, combining PLC logic and multi-axis motion control in a single unit
  8. SH31402P02A2000: Schneider matched synchronous servo motor, perfectly paired with the /10/1/1/1/00 drive for optimized performance
Category: SKU: THE SCHNEIDER ELECTRIC

Description

Product Core Overview

The Schneider Electric (Elau) C400/10/1/1/1/00 is a high-performance single-axis servo drive belonging to the Schneider PacDrive motion control platform, originally developed by Elau (now fully integrated into Schneider Electric Motion). Designed for high-precision, dynamic motion control applications, it delivers closed-loop position, velocity and torque regulation for synchronous servo motors, with native support for major industrial real-time Ethernet protocols. It is widely deployed in packaging machinery, material handling systems and automated assembly lines, offering exceptional reliability and seamless interoperability with Schneider’s industrial automation ecosystem.

 

Key Technical Specifications

  • Manufacturer: Schneider Electric (Elau)
  • Part Number: C400/10/1/1/1/00 (alternate spare part identifier VCA07AAAA0AA00)
  • Control Architecture: Single-axis motion controller with 32-bit high-speed DSP, supporting deterministic real-time servo loop execution
  • Power Supply: 24V DC or 48V DC wide-range industrial power input
  • Rated Output Current: 10A continuous output current, with peak current up to 20A for short-duration acceleration
  • Communication Protocols: Native support for Ethernet/IP, Modbus TCP and Sercos III real-time industrial Ethernet, enabling seamless integration with PLC and HMI systems
  • Operating Environment: -20°C to +70°C operating temperature range, 5% to 95% non-condensing humidity tolerance
  • Physical Dimensions: 103.2mm width × 310mm height × 248mm depth, net weight approximately 3.2kg
  • Mounting: Standard DIN rail or panel mounting for industrial control cabinet installation
  • Safety Features: Built-in safe torque off (STO) function, overcurrent, overvoltage and overheating protection, compliant with IEC 61800-5-1 functional safety standards

C400/10/1/1/1/00

8 Recommended Related Series Models

  1. C400/05/1/1/1/00: 5A continuous output current variant, optimized for small, low-inertia servo motor applications
  2. C400/15/1/1/1/00: 15A high-power output version, designed for large, high-torque servo motor driving requirements
  3. C400/10/2/1/1/00: Dual-axis servo drive variant, controlling two independent servo axes from a single compact unit
  4. C600/10/1/1/1/00: Next-generation PacDrive servo drive with expanded motion programming capacity and advanced safety functions
  5. VCA07AAAA0AA00: Official Schneider rebranded part number for the C400/10/1/1/1/00, fully hardware and firmware compatible
  6. Lexium 62: Schneider modern multi-axis servo system, offering higher performance and expanded axis count for large-scale motion control lines
  7. PacDrive 3: Elau/Schneider integrated motion controller platform, combining PLC logic and multi-axis motion control in a single unit
  8. SH31402P02A2000: Schneider matched synchronous servo motor, perfectly paired with the /10/1/1/1/00 drive for optimized performance

 

Professional Quality Control Test Standard Operating Procedure

  1. Pre-Test Visual Inspection: Examine the drive housing, power terminals and communication connectors for physical damage, bent pins or corrosion; confirm all status LEDs and mounting brackets are fully intact
  2. Power Stress Validation: Mount the unit on a certified test bench, apply variable DC input from 20V to 52V, verify no overcurrent, overheating or unexpected shutdown occurs across the full voltage operating range
  3. Firmware Integrity Check: Connect the Schneider SoMachine configuration software, confirm firmware signature matches the official Elau/Schneider release baseline, validate no corruption in motion control runtime
  4. Output Performance Test: Connect a matched servo motor to the drive, run continuous full-speed forward/reverse cycling for 2 hours, confirm no torque ripple or position deviation under full load
  5. Communication Compliance Test: Run 72-hour continuous real-time motion command transmission test via Sercos III, confirm zero packet loss and deterministic ≤1ms motion loop latency
  6. Safety Function Verification: Trigger the Safe Torque Off (STO) input manually, confirm the drive cuts motor power completely within the required safe time window with no residual torque output
  7. Environmental Temperature Cycling: Place the drive in an environmental chamber, run full functional validation across -20°C to +70°C operating range, confirm no performance degradation or unexpected fault trips at extreme temperature limits
  8. Final Documentation: Record all test metrics and performance data in the official Schneider quality log, assign unique serial number traceability tag, and issue formal performance certification report before shipment

 

New Module Installation Guidelines

  1. Pre-Installation Preparation: Power down the target control cabinet completely, confirm DC power supply output is stable within 24V/48V rated range, wear certified ESD wrist strap connected to the cabinet grounding point before handling the drive
  2. Mounting Installation: Secure the /10/1/1/1/00 on the DIN rail or mounting panel, maintain a minimum 50mm clearance around the drive for proper heat dissipation, avoid installing adjacent to high-power heat-generating devices
  3. Wiring Connection: Wire the DC power input, motor power cable and encoder feedback cable strictly following the official Elau wiring diagram, separate power cables from low-level signal cables to eliminate electrical interference
  4. Communication Cabling: Connect the Sercos III/Ethernet/IP industrial Ethernet cable to the motion control network, use shielded CAT5e/CAT6 cable and properly terminate the bus at both ends
  5. Power-Up and Initial Diagnostic: Restore power, observe front panel status LEDs; confirm the drive completes initialization within 30 seconds and appears online in the SoMachine motion diagnostic utility
  6. Motor Configuration and Tuning: Load the matched servo motor parameter file, perform automatic auto-tuning for the current, velocity and position control loops, run a full point-to-point motion test to validate performance before transferring to production operation

 

Application Scenarios and Features

  • High-Speed Packaging Machinery: Deployed in form-fill-seal, cartoning and labeling machines, delivering ultra-dynamic motion control for flying shear, cam following and synchronized multi-axis packaging processes
  • Automated Material Handling: Used in high-speed gantry systems, robotic palletizers and conveyor sorting lines, providing precise position control for fast, accurate product handling and sorting operations
  • Food & Beverage Processing Lines: Applied in filling, capping and packaging production lines, supporting clean-grade design requirements and long-term reliable operation in washdown industrial environments
  • Pharmaceutical Assembly Equipment: Deployed in medical device and drug packaging machinery, meeting strict regulatory requirements for repeatable, high-precision motion control to ensure product quality consistency
  • Printing & Converting Machinery: Used in high-speed flexographic printing and slitting lines, delivering synchronized web tension control and register correction to maintain perfect print registration accuracy at full production speed

 

Frequently Asked Questions

  1. Q: My drive reports “Overcurrent” fault immediately after power-up, what is the most common root cause?
    A: First check the motor power cable for short-circuit or phase-to-ground fault, then confirm the motor rated current parameter in the drive configuration matches the actual connected servo motor. Mismatched motor parameters are the most frequent cause of this fault.
  2. Q: Can I replace an old /10/1/1/1/00 unit with a new unit directly without reconfiguration?
    A: Full compatibility requires matching the exact firmware version and motor parameter set. You can perform a direct replacement only if you export and restore the full existing motion project backup to the new drive, otherwise you must re-validate all motion tuning parameters.
  3. Q: What is the maximum position control accuracy this drive can achieve?
    A: When paired with a 20-bit high-resolution absolute encoder servo motor, the /10/1/1/1/00 can achieve sub-arcminute position control accuracy, fully meeting the most demanding high-precision motion application requirements.
  4. Q: Does this drive support functional safety certification for safety-related motion applications?
    A: Yes, the /10/1/1/1/00 comes with native SIL 2 / PLd certified Safe Torque Off (STO) function, which can be integrated into machine safety circuits to meet global machinery safety regulation requirements.