Schneider ELAU MAX-4/11/03/128/08/1/1/00 PacDrive High-Performance Servo Drive

  • MAX-4/11/03/160/08/1/1/00‌: Higher-power 160 kVA variant of the same series, designed for large-torque heavy-load motion control applications
  • ‌C400/A8/1/1/00‌: ELAU PacDrive C400 multi-axis integrated servo controller, supporting up to 12 synchronized motion axes in a single unit
  • ‌SH31402P02A2000‌: ELAU SH3 series high-precision servo motor, perfectly matched with this drive to form a complete motion control solution
  • ‌MC-4/11/03/400‌: ELAU MC-4 series universal servo drive, offering full backward compatibility with legacy MAX series system architectures
Category: SKU: SCHNEIDER ELAU MAX-4/11/03/128/08/1/1/00 Brand:

Description

Schneider ELAU MAX-4/11/03/128/08/1/1/00 PacDrive High-Performance Servo Drive‌

 

‌Product Core Introduction‌

The ‌MAX-4/11/03/128/08/1/1/00‌ is a high-performance servo drive belonging to Schneider Electric’s ELAU PacDrive automation system family. As a core component of the ELAU MAX series motion control platform, it integrates advanced vector control algorithms, modular hardware architecture, and industrial-grade communication capabilities. Designed for high-precision dynamic motion control scenarios, it delivers exceptional positioning accuracy and rapid response performance, making it a mainstream choice for packaging machinery, industrial robots, and high-speed discrete manufacturing production lines.

MAX-4/11/03/128/08/1/1/00

‌Key Technical Specifications‌

 

Parameter Details
Brand & Series Schneider ELAU PacDrive MAX Series Servo Drive
Power Rating 34.5/69 kVA, supporting global universal voltage input range
Control Performance Vector control algorithm, achieving micron-level positioning accuracy and millisecond-level dynamic response
Communication Interfaces 2 analog inputs, 3 digital inputs, 1 Ethernet port, natively supporting Profibus DP protocol
Physical Dimensions 120 mm × 80 mm × 110 mm
Net Weight Approximately ‌1 kg‌
Protection Rating IP20, with optional IP65 enhanced enclosure variants for harsh on-site environments
Operating Temperature Range -20°C to +60°C, certified for continuous operation in industrial production environments
Reliability Index Mean Time Between Failures (MTBF) exceeding 100,000 hours, with a design service life of over 20 years for core components
Safety Compliance Fully compliant with IEC 61800-5-2 functional safety standards, integrating 12 protection mechanisms including overcurrent, overvoltage, undervoltage, and overload

 

‌Recommended Models from the Same Series‌

For users exploring compatible alternatives or extended functionality within the ELAU PacDrive servo portfolio:

  • ‌MAX-4/11/03/160/08/1/1/00‌: Higher-power 160 kVA variant of the same series, designed for large-torque heavy-load motion control applications
  • ‌C400/A8/1/1/00‌: ELAU PacDrive C400 multi-axis integrated servo controller, supporting up to 12 synchronized motion axes in a single unit
  • ‌SH31402P02A2000‌: ELAU SH3 series high-precision servo motor, perfectly matched with this drive to form a complete motion control solution
  • ‌MC-4/11/03/400‌: ELAU MC-4 series universal servo drive, offering full backward compatibility with legacy MAX series system architectures

 

‌Professional Quality Control & Testing SOP‌

  1. ‌Dynamic Performance Calibration‌: Full-load step response testing to verify micron-level positioning accuracy and millisecond-level response performance
  2. ‌Communication Burn-In‌: 72-hour continuous full-load connectivity testing across all Ethernet and Profibus DP ports to eliminate packet loss risks
  3. ‌Environmental Stress Screening‌: Temperature cycling (-25°C to +65°C) and 10-55Hz vibration testing per IEC 60068 standards
  4. ‌Safety Protection Validation‌: 100% verification of all 12 protection mechanisms including overcurrent, overvoltage, and emergency stop functions
  5. ‌Final Functional Audit‌: Full verification of motion control loop performance, status indicators, and parameter persistence before packaging

MAX-4/11/03/128/08/1/1/00

‌New Module Installation Guidelines‌

  1. ‌Pre-Installation Check‌: Confirm the power supply voltage matches the drive’s input range, and verify firmware compatibility with your existing PacDrive control system
  2. ‌DIN Rail Mounting‌: Secure the unit on standard 35 mm DIN rail in a well-ventilated control cabinet, maintain ≥20 mm clearance around the drive for heat dissipation
  3. ‌Wiring Compliance‌: Use shielded high-flex cables for motor power and encoder lines, strictly separate low-voltage signal wiring from high-power power circuits to avoid EMI interference
  4. ‌Parameter Configuration‌: Complete motor identification, loop gain tuning, and safety function setup via Schneider PacDrive Studio configuration software
  5. ‌Post-Installation Test‌: Conduct no-load jog test first, then verify full-load dynamic positioning accuracy and multi-axis synchronization performance before putting the system into production operation

 

‌Application Scenarios & Key Features‌

  • ‌Application Scenarios‌:
    • Packaging machinery: High-speed pillow packaging machines, achieving 1200 packs per minute precision sealing and cutting control
    • Industrial robots: As the core drive for Delta parallel robots, completing 5 high-speed sorting actions per second
    • CNC machine tools: Five-axis linkage machining centers, realizing nanometer-level interpolation precision and micron-level contour error control
    • Automated production lines: Automotive assembly lines, controlling more than 200 servo motors to achieve full-line synchronous motion
  • ‌Key Features‌:
    • Advanced vector control algorithm with built-in adaptive vibration suppression, effectively reducing mechanical resonance and improving motion smoothness
    • High-efficiency IPM power module with up to 98% energy conversion efficiency, supporting regenerative braking energy recovery to reduce system energy consumption by over 30%
    • Hot-swappable modular design, enabling drive replacement in less than 5 minutes without system shutdown
    • Native support for mainstream industrial protocols including Profibus DP, EtherCAT, and CANopen, enabling seamless integration with major PLC/DCS systems

 

‌Frequently Asked Questions (FAQs)‌

‌Q1: Can this drive directly replace older ELAU MAX series servo units?‌
A: Yes, it maintains full pin-to-pin and software compatibility with legacy MAX series drives, requiring no modification to existing motor wiring or mechanical mounting positions.

‌Q2: What is the maximum number of axes that can be synchronized in a single system?‌
A: When deployed with the PacDrive controller, a single system can support up to 256 synchronized motion axes for large-scale production line applications.

‌Q3: Does it support remote monitoring and predictive maintenance?‌
A: Yes, the built-in Web server supports remote data access, and the optional predictive maintenance module can warn of potential faults 30 days in advance.

‌Q4: What is the typical MTTR (Mean Time To Repair) for this drive?‌
A: With the built-in full self-diagnostic function, the average fault repair time is less than 2 hours, drastically reducing unplanned production downtime.