Description
170PNT11020 — Modbus Plus Communication Adapter (Schneider Electric / Modicon Momentum)

170PNT11020
Overview
The 170PNT11020 is a Modbus Plus communication adapter for Schneider Electric’s Modicon Momentum automation platform. Plugged into any Momentum I/O base, it turns that base into a fully functional node on a Modbus Plus network, giving the whole family of Momentum I/O modules a direct, high-speed connection to the bus. It is a communication module only — it handles network traffic, not field signals — and it draws its power directly from the I/O base, so no separate supply wiring is required.
Key Features
- Modbus Plus protocol at 1 Mbit/s, using a token-bus, peer-to-peer access method for deterministic, high-speed data exchange
- Twisted-pair, multidrop topology — devices connect via extension or tap-off cable, making it easy to add or relocate nodes
- Dual 9-pin D-Sub connectors — one for the primary network and one for a redundant Modbus Plus network, supporting fail-safe communication paths
- Three LED indicators — one green (power / MB+ activity) and two red (ERR A / ERR B) for fast fault diagnosis
- Scalable — up to 31 devices per segment and up to 64 devices across all segments
- Long-distance coverage — up to 1,200 m per segment, extendable to roughly 5,000 m (16,404 ft) with a repeater
- Rugged, cabinet-ready design — IP20 protection, 0–60 °C operating range, compact Momentum module format
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Schneider Electric |
| Product type | Modbus Plus communication adapter |
| Product line | Modicon Momentum |
| Protocol | Modbus Plus |
| Baud rate | 1 Mbit/s |
| Access method | Token bus, peer-to-peer (P2P) |
| Transmission medium | Twisted pair (tap-off / extension cable) |
| Electrical connection | 2 × SUB-D 9-pin (network + redundant network) |
| Devices per segment | 0–31 |
| Total devices (all segments) | 0–64 |
| Max. distance between devices | ~5,000 m with repeater |
| Data format | IEC 61131-2 |
| Power supply | From Momentum I/O base |
| Local signalling | 1 green LED (MB + ACT), 2 red LEDs (ERR A / ERR B) |
| Protection class | IP20 |
| Operating temperature | 0 to 60 °C (non-condensing) |
| Storage temperature | −40 to 85 °C (non-condensing) |
| Relative humidity | Up to 95 %, non-condensing |
| Operating altitude | ≤ 5,000 m |
| EMC / ESD | 4 kV contact, 8 kV air (IEC 801-2); 10 V/m, 80–1000 MHz (IEC 801-3) |
| Certifications | UL, CSA, CE; FM Class 1 Division 2 |
| Net weight | approx. 0.2 kg (shipping weight ~0.45 kg) |
Typical Applications
- Linking Momentum remote I/O racks and operator stations over a single twisted-pair backbone in manufacturing and packaging lines
- Process control in chemical, pharmaceutical, water and wastewater plants, where redundant network paths protect uptime
- Material handling and automated warehousing, where peer-to-peer exchange between controllers keeps conveyor and sorting response times tight
- Legacy system sustainment: keeping existing Modbus Plus installations running without a full control-network overhaul
Compatibility
Designed for the Modicon Momentum platform and compatible with Premium and Quantum PLCs acting as bus managers. Every device on the network must also support Modbus Plus.

