Description
ZYGO ZMI4104C 4-Axis 6U VME64x Interferometry Measurement Board
Product Overview
The ZYGO ZMI4104C is a high-performance 4-axis heterodyne interferometry measurement board in 6U VME64x form factor, purpose-built for ultra-precise displacement metrology applications that demand sub-nanometer level accuracy. As the flagship model in the ZYGO ZMI series, it integrates ZYGO’s patented Cyclic Error Correction technology, which automatically eliminates the non-linear cyclic errors inherent in traditional displacement measuring interferometer (DMI) systems, pushing residual non-linear errors down into the system noise floor. It supports modular daisy-chaining in a VME chassis to scale up to 64 synchronized measurement axes, making it the industry-standard metrology core for advanced semiconductor lithography, high-precision motion stage characterization and nanometer-level industrial inspection systems.

ZYGO ZMI4104
Technical Specifications
| Parameter Category | Detailed Specification |
|---|---|
| Manufacturer | ZYGO (subsidiary of AMETEK) |
| Product Type | 4-Axis Heterodyne Interferometry Measurement Board |
| Form Factor | 6U VME64x standard industrial board |
| Number of Measurement Axes | 4 independent fully isolated channels per board |
| Minimum Acceptable Optical Input Power | 0.07 µW, the lowest in the ZMI series for extended optical path loss tolerance |
| Position Resolution | 0.15 nm, delivering sub-nanometer level displacement reading precision |
| Maximum Allowable Target Velocity | ±2.55 m/s, supporting high-speed motion stage operation without measurement data loss |
| Measurement Accuracy at Maximum Velocity (σ) | 0.2 nm, maintaining ultra-high precision even under full-speed dynamic conditions |
| Core Exclusive Feature | Patented Cyclic Error Correction, automatically eliminating all non-linear cyclic errors in DMI systems |
| Compatible Laser Sources | Fully compatible with ZYGO 7702, 7714 and 7724 series heterodyne laser transmitters |
| System Scalability | Modular daisy-chaining supports up to 64 synchronized measurement axes in a single VME chassis |
| Operating Temperature Range | 0°C to +55°C, standard industrial precision equipment rating |
| Installation Method | Direct plug-in to standard 6U VME64x industrial control rack backplane |
| MTBF Rating | Exceeds 500,000 hours for continuous 24/7 precision measurement operation |
8 Recommended Related ZYGO Models
- ZYGO ZMI4004 – Standard 4-axis VME64x interferometry board, cost-effective for applications that do not require cyclic error correction functionality
- ZYGO ZMI2400 – 1/2-axis 6U VME interferometry board, optimized for small-scale 1-2 axis precision positioning platforms
- ZYGO ZMI501A – 2-axis standalone enclosure interferometry unit, no VME rack required for easy deployment in laboratory test setups
- ZYGO ZMI Go! – Compact 4-axis integrated measurement electronics solution, designed for easy integration with standard motion control systems in advanced semiconductor packaging applications
- ZYGO 7724 Laser Source Unit – High-stability heterodyne laser transmitter, the top-tier optical signal source fully optimized for ZMI4104C
- ZYGO MetroPro Software Suite – Official metrology analysis software, enabling full measurement data visualization, parameter configuration and cyclic error calibration for ZMI4104C
- ZYGO Environmental Compensation Module – Real-time air temperature, pressure and humidity sensor unit, automatically correcting measurement errors caused by environmental refractive index changes
- ZYGO ZMI Interferometer Optical Head Series – Full range of non-contact displacement sensing optical components, capturing interference signals for ZMI4104C high-precision processing
Compatibility Notes & Critical Installation Pitfalls
- Laser Source Validation: ZMI4104C cannot operate normally with legacy ZYGO 7705 series laser sources; only 7702, 7714 and 7724 series heterodyne lasers are fully compatible
- Backplane Hardware Matching: The board only fits dedicated 6U VME64x backplanes; attempting to insert it into legacy VME or VME64 non-VME64x slots will cause data transmission truncation and measurement value drift
- Forbidden Hot-Swap: Never insert or remove the while the VME rack is powered on; live plugging will instantly burn out the high-speed FPGA chip on the board
- Optical Signal Alignment Requirement: The cannot activate the cyclic error correction function if the incident laser beam on the interferometer head is misaligned by more than 0.3 degrees; strict optical path alignment calibration is mandatory before power-on
- Grounding Isolation Mandatory: The board chassis grounding terminal must be connected to the independent precision measurement dedicated grounding grid; sharing grounding with high-power motion drivers will introduce electromagnetic interference leading to sub-nanometer level measurement jitter
- Optical Power Protection: Never directly expose the optical input port to unattenuated full-power laser output; this will permanently damage the high-sensitivity photoelectric receiver inside the board
Standard Operating Procedure
- Pre-operation preparation: Fully back up the existing VME system configuration and cyclic error calibration parameters via the host industrial computer, confirm the paired ZYGO laser source is powered off and the optical path is blocked with safety baffles
- ESD safety processing: Wear certified anti-static gloves and wrist strap, release residual static charge by touching the grounded precision measurement platform chassis
- Old board removal: Unlock the VME slot ejector levers on both sides, pull the faulty smoothly out of the backplane, avoid bending or damaging the backplane gold pin connectors during operation
- New board verification: Verify the new part number and suffix code, confirm no physical damage exists on all interface terminals and the FPGA firmware version supports the full cyclic error correction functionality
- Installation and wiring: Align the board with the VME64x slot guide rails, push it firmly into the backplane until fully seated, lock both ejector levers securely, then connect all optical signal fibers and high-speed data cables strictly following the original wiring diagram
- Power-on validation: Restore VME rack power, confirm the RUN LED indicator stays solid green, and the host system device manager correctly recognizes all 4 measurement channels of the
- Function calibration: Power on the ZYGO 7724 laser source, perform full optical path alignment, signal intensity calibration and automatic cyclic error correction calibration, validate the 0.15nm position resolution and 2.55m/s maximum velocity performance meet system specifications
- Final documentation: Update the equipment maintenance log with the new board serial number and firmware version, create a new full measurement system calibration parameter backup and store it in two independent offline storage locations
Typical Application Scenarios
- Advanced semiconductor lithography scanner stages, delivering sub-nanometer real-time position feedback for wafer and reticle ultra-precision positioning
- Nanopositioner performance characterization laboratories, measuring the true motion accuracy of high-end piezo stages with cyclic error correction enabled to eliminate all non-linear measurement artifacts
- High-precision multi-axis CNC ultra-precision machine tools, achieving sub-micron level motion trajectory accuracy for large optical component machining
- Flat panel display (FPD) advanced lithography platforms for next-generation large-area OLED panels, ensuring multi-axis synchronous positioning accuracy during high-resolution pattern exposure
- Aerospace precision component micro-deformation testing facilities, measuring nanometer-level displacement changes of high-strength materials under extreme temperature and vibration conditions
- Advanced semiconductor packaging and inspection equipment, providing high-speed high-precision position metrology for die bonding and wafer probing processes
Recommended Supporting Components
- ZYGO MetroPro metrology analysis software, enabling full parameter configuration, real-time data visualization and automatic cyclic error correction calibration
- ZYGO 7724 high-stability heterodyne laser source, the top-tier optical signal source fully optimized for to deliver maximum measurement performance
- ZYGO-certified shielded VME64x high-speed backplane cables, ensuring high-speed data integrity across multi-board 64-axis synchronized measurement systems
- ZYGO Class 3R certified laser safety goggles, protecting operators from accidental laser exposure during optical path adjustment
- Industrial-grade ESD anti-static operation kit, protecting the high-speed FPGA mainboard and high-sensitivity photoelectric receivers from electrostatic damage during maintenance
- ZYGO environmental compensation sensor module, automatically correcting measurement errors caused by air temperature, pressure and humidity fluctuations in the precision measurement operating environment



