YN5202-0277 ABB Symphony Plus SYN5202 Synchronization Module

  1. SYN5202: Base model of synchronization module family
  2. SYN5202-0276: Alternative variant of SYN5202
  3. HPC800K02: High performance process controller
  4. SPC800: Secondary process controller
  5. SD811: DCS rack power supply
  6. TU810: S800 terminal base
  7. SPBRC410: Bridge controller
  8. S800AI / S800AO: Analog I/O modules
Category: SKU: YN5202-0277 ABB SYMPHONY SYN5202 Brand:

Description

YN5202-0277 ABB Symphony Plus SYN5202 Synchronization Module

 

Product Overview

The SYN5202-0277 is a high-precision synchronization module for ABB Symphony Plus DCS system. It delivers time synchronization service across the whole plant control network, distributing accurate timestamp signals to controllers, I/O modules, operator stations and historians. This module supports multiple time reference sources and can work as a master clock or slave clock in redundant time synchronization architecture. Precise time alignment ensures consistent event sequence recording (SOE), accurate alarm timestamping and coordinated control actions for multi-controller DCS systems.

SYN5202-0277

Technical Parameters

 

Item Specification
Part Number SYN5202-0277
Manufacturer ABB
Product Family Symphony Plus S+
Module Type Time Synchronization Module
Mounting Symphony Plus rack baseplate mounting
Time Reference Input IRIG-B, PPS, NTP
Time Output NTP server, IRIG-B, PPS for field devices
Supported Protocol NTP / SNTP, IRIG-B (AM / DC shift), Pulse Per Second
Redundancy Supports dual redundant master clock configuration
Operating Temperature 0°C ~ +60°C
Power Supply Powered from Symphony Plus rack backplane
Accuracy Sub-millisecond time alignment for system events
Diagnostic Built-in self-test, status LED indicators, fault alarm reporting

 

Main Features

  1. High precision time synchronization for entire Symphony Plus DCS network.
  2. Multi-reference input: IRIG-B, PPS and NTP time sources for flexible deployment.
  3. Can be configured as NTP master server to provide network time to controllers and workstations.
  4. Supports redundant clock setup to avoid single point of failure for time service.
  5. Critical for Sequence of Events (SOE) logging with unified high-resolution timestamps.
  6. LED status indicators for power, run, fault and time lock status.
  7. Continuous self-diagnosis; automatically raises alarms if time source loss or module fault occurs.
  8. Works seamlessly with HPC800 series controllers including HPC800K02.
  9. Hot-swappable in qualified S+ rack configuration, no need to shut down the whole system.
  10. Firmware upgradable via Symphony Plus engineering tool.

 

Application & Industry Scenarios

Application Information

The SYN5202-0277 module provides unified high-accuracy time reference for all nodes in the DCS system. It synchronizes HPC800 controllers, I/O units, operator HMI and event logger. It guarantees that all process alarms, trip events and SOE records have consistent timestamps, which is essential for post-fault analysis and incident reconstruction. It can receive time signal from GPS master clock and distribute standardized time across plant control network.

Typical Industries

  • Thermal power plants (unit control, SOE & turbine protection)
  • Oil & gas refineries and pipeline automation
  • Chemical continuous process plants
  • Pulp & paper mills
  • Large water treatment facilities
  • Metallurgy and cement process DCS

 

Matching / Supporting Components

  1. HPC800K02 / HPC800K01: Symphony Plus process controllers
  2. S+ rack baseplates and backplanes
  3. GPS time source receiver (external master clock)
  4. SD811: Symphony Plus power supply module
  5. S800 remote I/O units
  6. Symphony Plus Engineering Tool software for configuration & diagnostics
  7. Redundant network switches for time signal distribution

 

Related ABB Symphony Plus Reference Models

  1. SYN5202: Base model of synchronization module family
  2. SYN5202-0276: Alternative variant of SYN5202
  3. HPC800K02: High performance process controller
  4. SPC800: Secondary process controller
  5. SD811: DCS rack power supply
  6. TU810: S800 terminal base
  7. SPBRC410: Bridge controller
  8. S800AI / S800AO: Analog I/O modules