Triconex 8312 Tricon Chassis 230VAC Redundant Power Supply Module

  1. 8310 Tricon 120VAC Power Supply Module
  2. 8311 Tricon 24VDC Input Power Module
  3. 8111 Classic Tricon Redundant Power Supply
  4. 8117 Upgraded Tricon Power Supply
  5. 3008 Tricon Main Processor Module
  6. 3625 TMR Digital Output Module
  7. 3721 32-channel Analog Input Module
  8. 4351B TCM Communication Module

 

Category: SKU: TRICONEX 8312 Brand:

Description

Triconex 8312 Tricon Chassis 230VAC Redundant Power Supply Module

 

Executive Summary

The Triconex 8312 is a rack slide-in power supply module developed by Triconex (Schneider Electric) for classic Tricon TMR safety instrumented systems. It accepts 230VAC mains input and converts it into multiple isolated DC power rails to supply backplane power for Tricon main processors, I/O modules and communication cards. Two 8312 modules can be deployed in 1+1 load-sharing redundant configuration. If one power unit fails, the remaining module can fully sustain the entire chassis load without interrupting safety logic operation. Continuous hardware self-diagnostics monitor input status, output voltage, internal temperature and fuse health. Front panel multi-status LEDs deliver direct visual alerts, and dry contact relay outputs transmit fault alarms to the plant DCS/SCADA. Widely used in oil & gas, petrochemical, thermal power and chemical ESD emergency shutdown systems, it serves as a critical spare power unit for legacy Tricon cabinet overhaul and maintenance.

 

Core Technical Specifications

  • Manufacturer: Triconex (Schneider Electric, USA)
  • Model: 8312
  • Product Type: Tricon Chassis AC Power Supply Module
  • AC Input: 185–285 VAC, 47–63Hz, nominal 230VAC
  • Built-in Fuse: 2.5A time-delay fuse
  • DC Output: Multiple isolated regulated DC rails for Tricon backplane, rated total power 175W @ 60℃
  • Hold-up Time: Minimum 20ms, tolerates brief AC power dip without system reset
  • Redundancy Mode: 1+1 parallel load sharing
  • Protection: Overvoltage OVP, overcurrent OCP, overtemperature OTP, short-circuit protection
  • Diagnostic Indicators: PASS, FAULT, ALARM, TEMP, BAT LOW LEDs
  • Safety Certification: IEC61508 SIL3 compliant for SIS application
  • Operating Temperature: 0℃ ~ +60℃
  • Storage Temperature: -40℃ ~ +85℃
  • Relative Humidity: 5% ~95%, non-condensing
  • Mounting: Slide-in power module for Tricon main / expansion chassis
  • Net Weight: Approx.2.85 kg
  • Origin: United States

 

Main Features & Advantages

  1. 1+1 redundant parallel operation: Dual 8312 modules share chassis load. Single power supply fault will not shut down the safety instrumented system.
  2. 230VAC nominal wide AC input: 185~285VAC input range, strong tolerance for industrial grid voltage fluctuation.
  3. Multi-isolated DC power rails: Separated power outputs for logic circuits and field I/O, reducing cross-interference between circuits.
  4. 20ms minimum power hold-up time: Short transient power drop will not trigger system reset or safety trip.
  5. Full suite of self-diagnostics: Real-time monitoring of input loss, output drift, over-temperature and battery low warning. Front LED and remote relay alarm.
  6. Hot swap capability: Online module replacement while Tricon SIS keeps running, minimizing plant maintenance downtime.
  7. SIL3 safety compliance: Designed for safety-critical ESD, BMS and F&G loops in hazardous process plants.
  8. Standard Tricon chassis form factor: Direct plug-and-play replacement, compatible with legacy Tricon main and expansion racks.

 

Application Scenarios

  • Petrochemical refinery ESD emergency shutdown control cabinet
  • Offshore platforms and natural gas pipeline safety instrumented systems
  • Thermal power plant boiler and turbine safety interlock protection
  • Hazardous chemical production safety shutdown system
  • Tank farm high-risk area safety control cabinet power supply
  • Legacy Tricon TMR main rack power overhaul and spare backup
  • Burner management and fire & gas safety control systems

 

Recommended Related Models (8pcs)

  1. 8310 Tricon 120VAC Power Supply Module
  2. 8311 Tricon 24VDC Input Power Module
  3. 8111 Classic Tricon Redundant Power Supply
  4. 8117 Upgraded Tricon Power Supply
  5. 3008 Tricon Main Processor Module
  6. 3625 TMR Digital Output Module
  7. 3721 32-channel Analog Input Module
  8. 4351B TCM Communication Module

 

FAQ

Q1: What is Triconex 8312? A: Triconex 8312 is a 230VAC input power supply module for Tricon SIL3 SIS, supplying multi-channel DC power to Tricon rack backplane CPU, I/O and communication boards.

Q2: What is the difference between 8312 and 8311 / 8310? A: 8312: 230VAC input; 8310: 120VAC input; 8311: 24VDC input. They share the same chassis slot form factor but different input power types.

Q3: Is Triconex 8312 still in production? A: Classic Tricon series including 8312 has been discontinued by Schneider Triconex. Available stock includes original new surplus and fully tested refurbished units.

Q4: Does 8312 support hot swap? A: Yes, hot swap is supported. On-site replacement must strictly comply with LOTO lockout-tagout and safety work permit procedures.

Q5: What does BAT LOW LED indicate? A: It warns low voltage of the backup battery on the processor module, not a fault inside the 8312 power module itself.

Q6: What triggers the FAULT alarm relay? A: AC input loss, output overvoltage/undervoltage, overtemperature, internal hardware failure or blown internal time-delay fuse.

Q7: Can 8312 replace 8111 directly? A: They fit the same rack slot, but electrical design and power rating differ. Do not swap directly; verify chassis power load and wiring before substitution.

Q8: What are common faults for 8312? A: Internal electrolytic capacitor aging, blown time-delay fuse, temperature sensor drift, connector pin oxidation and intermittent FAULT alarm.