Triconex 3008 TMR Main Processor Module for Tricon SIS

  1. 3006 Earlier generation Tricon Main Processor Module
  2. 3009 Newer upgraded Tricon Main Processor
  3. 3625 16-channel TMR Digital Output Module
  4. 3503E Digital Input Module
  5. 3721 32-channel Analog Input Module
  6. 4351B TCM Communication Module
  7. 8111 Tricon Chassis Redundant Power Supply
  8. 8117 Upgraded Chassis Power Supply

 

Category: SKU: TRICONEX 3008 Brand:

Description

Triconex 3008 TMR Main Processor Module for Tricon SIS

 

Executive Summary

The Triconex 3008 is the core triple modular redundant main processor module designed for Schneider Triconex Tricon safety instrumented system, applicable for Tricon firmware version V9.6 and above. Three 3008 modules must be installed together in the main chassis to form a complete 2-out-of-3 (2oo3) TMR fault-tolerant controller. Each processor independently executes safety logic, collects I/O data, performs hardware voting via dedicated TriBus high-speed synchronization bus. It supports SOE sequence-of-event recording, real-time logic solving and communication interaction with I/O and gateway modules. Built-in comprehensive self-diagnosis continuously monitors hardware health. It supports hot-swap maintenance and IEC61508 SIL3 safety certification. Widely deployed in oil & gas, petrochemical, thermal power and chemical ESD emergency shutdown systems, it is the key spare CPU card for legacy Tricon cabinet overhaul and maintenance.

 

Core Technical Specifications

  • Manufacturer: Triconex (Schneider Electric, USA)
  • Model: 3008
  • Product Type: TMR Main Processor (MP) Module
  • CPU: Motorola MPC860, 32-bit, 50MHz
  • Memory: 16MB DRAM; 32KB battery-backed SRAM; 6MB Flash PROM
  • Redundancy Architecture: Triple Modular Redundancy (TMR), 2oo3 hardware voting
  • Inter-processor Bus: TriBus @25Mbps, with 32-bit CRC data protection
  • Supported System Version: Tricon V9.6, V10, V10.5, V11
  • Safety Certification: IEC61508 SIL3
  • Power Supply: Powered from Tricon chassis backplane, dual redundant power rails
  • Operating Temperature: 0℃ ~ +60℃
  • Storage Temperature: -40℃ ~ +85℃
  • Relative Humidity: 5% ~95%, non-condensing
  • Status LED: PASS, FAULT, ACT/RUN indicators
  • Mounting: Slide-in card for Tricon main chassis slot (3 units required per main rack)
  • Net Weight: Approx.2.1 kg
  • Origin: United States

 

Main Features & Advantages

  1. TMR triple redundant computing architecture: Three synchronized processors run identical safety logic. Single CPU hardware fault will not interrupt safety control.
  2. High-precision SOE sequence of events recording: Time-stamps process alarm and trip events for post-fault root cause analysis.
  3. Dedicated TriBus synchronization bus: 25Mbps high-speed inter-processor communication with CRC check to guarantee voting data integrity.
  4. Complete online self-diagnosis: Real-time detection of CPU, memory, bus and internal hardware faults, reported via front LED and TriStation software.
  5. Hot swap capability: Individual processor module can be replaced online while SIS keeps running, reducing plant shutdown duration.
  6. Flash firmware storage: Firmware upgrade can be completed via front Ethernet port, no EPROM chip replacement required.
  7. SIL3 functional safety compliance: Meets IEC61508 standard, suitable for safety-critical emergency shutdown and interlock loops.
  8. Seamless coordination with I/O and communication cards: Native compatibility with full series Tricon I/O, power and communication modules.

 

Application Scenarios

  • Petrochemical refinery ESD emergency shutdown safety system
  • Offshore platforms and natural gas pipeline safety instrumented control
  • Thermal power plant boiler and turbine safety interlock protection
  • Hazardous chemical production safety shutdown system
  • Tank farm high-risk area safety protection controller core unit
  • Legacy Tricon TMR main rack CPU replacement and system upgrade
  • Fertilizer and fine chemical plant safety control systems

 

Recommended Related Models (8pcs)

  1. 3006 Earlier generation Tricon Main Processor Module
  2. 3009 Newer upgraded Tricon Main Processor
  3. 3625 16-channel TMR Digital Output Module
  4. 3503E Digital Input Module
  5. 3721 32-channel Analog Input Module
  6. 4351B TCM Communication Module
  7. 8111 Tricon Chassis Redundant Power Supply
  8. 8117 Upgraded Chassis Power Supply

 

FAQ

Q1: What is Triconex 3008? A: Triconex 3008 is Tricon main processor module. Three of them work together to form the TMR safety controller core, executing safety logic and performing 2oo3 voting for SIS.

Q2: What is the difference between 3008 and 3006? A: 3006 is older generation MP; 3008 adopts MPC860 PowerPC processor, larger memory, supports higher firmware versions and Ethernet firmware upgrade.

Q3: Is Triconex 3008 still in production? A: Classic Tricon series including 3008 has been discontinued by Schneider Triconex. Available stock includes original new surplus and fully tested refurbished modules.

Q4: Must three 3008 modules be used together? A: Yes, the Tricon main chassis requires three 3008 processors installed to implement the 2-out-of-3 TMR voting mechanism.

Q5: Does it support hot swap? A: Yes, single 3008 can be hot swapped. On-site maintenance must follow LOTO lockout-tagout and safety work permit procedures.

Q6: What is TriBus? A: TriBus is proprietary high-speed bus for three processors to synchronize data and complete hardware majority voting.

Q7: What is SOE function? A: Sequence of Events, it records the time stamp of field signal state changes, to identify the sequence of events during plant trip.

Q8: What are common faults for 3008? A: Battery-backed SRAM battery depletion, flash firmware corruption, TriBus communication error, memory failure and PASS/FAULT diagnostic alarm.