Description
Product Core Overview
The Reliance Electric 0-57402-C is a dedicated 115V AC/DC Low Output Module belonging to Reliance Electric’s classic Automax PLC series product family (now under Rockwell Automation). As the core low-power digital output component for Automax PLC systems, it delivers stable 24-115V wide-range output drive capability, 16-channel independent output control and native seamless compatibility with all Automax PLC platforms. This discontinued industrial spare part is widely deployed in legacy metallurgical rolling mills, heavy industrial production lines and large automated control systems worldwide, and is a critical spare part for many factories to maintain continuous production without full PLC system renovation .
Key Technical Specifications
- Official Part Number: 0-57402-C
- Manufacturer: Reliance Electric (acquired by Rockwell Automation)
- Product Type: 115V AC/DC Low Output Module
- Core Function: Low-power digital signal output, industrial field device drive
- Rated Input Voltage: 115V AC/DC dual-mode adaptive
- Output Voltage Range: 24V to 115V wide-range adjustable
- I/O Configuration: 16 independent output circuits, total 36 output terminals (16 small ports numbered 0-15, plus 20 larger ports)
- Status Indication: Each of the 16 output circuits is equipped with a dedicated LED status indicator, real-time feedback of output working state
- Compatible Systems: Natively fully compatible with Reliance Electric Automax series programmable logic controllers
- Physical Dimensions: 17cm × 5cm × 11cm
- Net Weight: Approximately 1.36kg (3 pounds)
- Operating Temperature Range: 0°C to +60°C (no condensation in control cabinet)
- Humidity Resistance: 5–95% RH, no condensation
- Installation Method: Direct plug-in into designated slot in Automax system rack
- Status: Discontinued, Rockwell Automation no longer provides official new unit supply and full technical support
- Typical Loads: Directly drives motor starters, indicator lights, solenoid valves and other low-power industrial field devices
8 Recommended Related Series Models
- 0-57402-1: Reliance fully compatible low output module, 100% drop-in replacement for 0-57402-C
- 61C350: Reliance Automax series PLC processor module, the native host platform paired with this output module
- 0-57400-A: Reliance Automax series digital I/O drive module, for digital signal bidirectional processing
- 0-57170: Reliance Universal Drive Controller (UDC) module, for independent high-speed drive logic processing
- 0-51378-25: Reliance DC drive gate coupling board, natively paired with this output module for thyristor trigger control
- 0-52712 800756-21B: Reliance PC output frequency module, for drive speed signal output to upper-level system
- ABB AC 800M: Distributed Control System, for upper-level DCS system industrial control data collection and processing
- WR-D4007: Reliance redundant power supply module, delivering stable 24V DC redundant power for the Automax system rack

0-57402-C
Professional Quality Control Test Standard Operating Procedure
- Pre-Test Visual Audit: Inspect the module PCB for physical damage, corroded backplane pins or loose components; confirm all 16 output channel LED status indicators are fully intact
- Power Stress Validation: Insert the unit into a certified Reliance Automax test chassis, apply variable 115V AC/DC input across full operating range, verify no overcurrent, overheating or unexpected shutdown occurs
- Output Channel Performance Test: Test all 16 independent output circuits one by one, confirm every channel output voltage and load drive performance meets official specifications, no signal distortion or dropout occurs
- Indicator Function Validation: Verify each of the 16 dedicated LED status indicators operates normally according to different output states, no indicator light failure or misdisplay occurs
- Load Drive Validation: Connect standard industrial loads (motor starter, indicator light, solenoid valve) to each output channel sequentially, confirm every load can be driven stably without abnormal action
- Environmental Temperature Cycling: Place the module in an environmental chamber, run full functional validation across 0°C to +60°C operating range, confirm no performance degradation or unexpected fault trips at extreme temperature limits
- Vibration Resistance Test: Simulate industrial 5–500Hz vibration environment, confirm no loose internal components or unstable signal output occurs
- Final Documentation: Record all test metrics and performance data in the quality log, assign unique serial number traceability tag, and issue formal performance certification report before shipment
New Module Installation Guidelines
- Pre-Installation Preparation: Power down the target Automax control rack completely, confirm the 115V AC/DC power supply is fully cut off, wear certified ESD wrist strap connected to the chassis grounding point before handling the module
- Slot Configuration: Insert the new 0-57402-C low output module into the designated slot in the Automax system rack, ensure no adjacent slots are occupied by incompatible non-Reliance modules that may cause backplane signal conflicts
- Mechanical Mating: Carefully align the module with the chassis DIN guide rails, push it smoothly into the slot until the rear edge connector fully mates with the system backplane, no extra mounting screws required
- Field Load Cabling Connection: Connect all field device cables to the corresponding output terminals, strictly separate low-power signal cables from high-power VFD motor cables to eliminate electrical interference
- Power-Up and Initial Diagnostic: Restore power supply, observe front panel status LEDs; confirm the module completes boot process and enters normal running state within 60 seconds, verify the module appears online in the Automax system diagnostic software
- Full System Validation: Perform full output loop test, confirm all 16 output channels can correctly drive corresponding field loads before transferring the industrial control system to normal operation mode
Application Scenarios and Features
- Automax PLC System Low-Power Output Expansion: Deployed in legacy Reliance Automax PLC systems, the 16-channel independent output configuration meets the large number of low-power field device drive requirements of industrial production lines, no extra intermediate relay required
- Industrial Field Device Direct Drive: Used in metallurgical rolling mill, packaging and textile production lines, the 24-115V wide-range output performance adapts to different industrial field device power requirements, drastically reducing system wiring complexity
- Heavy Industrial Production Line Legacy Control Systems: Applied in legacy Automax PLC production lines where the main control system is still intact, avoiding the huge cost and long downtime of full PLC system renovation
- Legacy Reliance Automax System Modernization: Acts as the official drop-in replacement for older 0-57402-C series output modules, preserving all existing backplane wiring and PLC program configuration to minimize production line downtime during hardware replacement
- General Industrial Automation Digital Output Expansion: Provides a convenient way to add a large number of low-power digital output points to an Automax PLC system, no extra control hardware required
Frequently Asked Questions
- Q: My module reports “No Output Response” fault after installation, what is the most common root cause?
A: 90% of this fault is caused by improper backplane connector contact. First pull out the module, clean the backplane gold finger surface with isopropyl alcohol, re-insert it firmly into the slot, confirm no loose connection exists. - Q: Can I replace an older 0-57402-C unit with this new unit directly without reconfiguration?
A: Yes, the 0-57402-C is fully pin-compatible and functionally identical to all earlier revisions, you can perform a direct drop-in replacement without any PLC program modification. - Q: What is the rated input voltage of this module?
A: The 0-57402-C supports 115V AC/DC dual-mode adaptive input, fully matching the standard industrial control cabinet power supply environment requirements. - Q: What typical field devices can this module directly drive?
A: The 0-57402-C can directly drive motor starters, indicator lights, solenoid valves and other low-power industrial field devices without extra intermediate relays .
