The Reliance Electric 0-57170 is a Universal Drive Controller (UDC) module belonging to Reliance Electric’s classic Automax PLC and legacy drive system

  1. 0-57170-1: Reliance fully compatible UDC module, 100% drop-in replacement for 0-57170
  2. 61C350: Reliance Automax series PLC processor module, the native host platform paired with this UDC module
  3. 0-51378-25: Reliance DC drive gate coupling board, natively paired with this UDC module for thyristor trigger control
  4. 0-52712 800756-21B: Reliance PC output frequency module, for drive speed signal output to upper-level system
  5. 0-54341-21: Reliance M rectifier suppressor board, for drive main circuit surge overvoltage protection
  6. 0-56942-1-CA: Reliance GV3000 series AC drive regulator board, for AC drive voltage regulation control
  7. ABB AC 800M: Distributed Control System, for upper-level DCS system drive operation data collection and processing
  8. WR-D4007: Reliance redundant power supply module, delivering stable 24V DC redundant power for the Automax system rack
Category: SKU: THE RELIANCE ELECTRIC 0-57170 Brand:

Description

Product Core Overview

The Reliance Electric 0-57170 is a Universal Drive Controller (UDC) module belonging to Reliance Electric’s classic Automax PLC and legacy drive system product family (now under Rockwell Automation). As the core dedicated control unit for Reliance legacy drive systems, it delivers independent high-speed drive logic processing, native seamless compatibility with all Automax processors, and supports mixed installation with existing Reliance drive control modules in the same rack. This discontinued industrial spare part is widely deployed in metallurgical rolling mills, large DC/AC drive systems and heavy industrial production lines worldwide, and is a critical spare part for many factories to maintain continuous production without full drive system renovation .

 

Key Technical Specifications

  • Official Part Number: 0-57170
  • Manufacturer: Reliance Electric (acquired by Rockwell Automation)
  • Product Type: Universal Drive Controller (UDC) Module
  • Core Function: Independent high-speed drive logic processing, drive system configuration and real-time operation control
  • I/O Configuration: 16 optically isolated inputs, 16 relay outputs
  • Supported Power Supply: 120V AC or 24V DC dual power supply mode
  • Installation Method: DIN rail mountable, direct plug-in into Automax system rack
  • Net Weight: 2.65kg
  • Operating Temperature Range: 0°C to +60°C (no condensation in control cabinet)
  • Storage Temperature Range: -40°C to +85°C
  • Humidity Resistance: 5–95% RH, no condensation
  • Compatibility: Fully compatible with all AutoMax Processors, can be mixed with existing Reliance drive control modules in the same rack
  • Programming Support: Configured and programmed via AutoMax Programming Executive software, supporting UDC task creation, dual-port register configuration and on-line variable monitoring
  • Status: Discontinued, Rockwell Automation no longer provides official new unit supply and full technical support
  • Origin: United States
  • Warranty: New surplus units on the market provide 12-month after-sales quality guarantee

 

8 Recommended Related Series Models

  1. 0-57170-1: Reliance fully compatible UDC module, 100% drop-in replacement for 0-57170
  2. 61C350: Reliance Automax series PLC processor module, the native host platform paired with this UDC module
  3. 0-51378-25: Reliance DC drive gate coupling board, natively paired with this UDC module for thyristor trigger control
  4. 0-52712 800756-21B: Reliance PC output frequency module, for drive speed signal output to upper-level system
  5. 0-54341-21: Reliance M rectifier suppressor board, for drive main circuit surge overvoltage protection
  6. 0-56942-1-CA: Reliance GV3000 series AC drive regulator board, for AC drive voltage regulation control
  7. ABB AC 800M: Distributed Control System, for upper-level DCS system drive operation data collection and processing
  8. WR-D4007: Reliance redundant power supply module, delivering stable 24V DC redundant power for the Automax system rack

0-57170

Professional Quality Control Test Standard Operating Procedure

  1. Pre-Test Visual Audit: Inspect the module PCB for physical damage, corroded backplane pins or loose components; confirm all I/O terminals and rack locking mechanisms are fully intact
  2. Power Stress Validation: Insert the unit into a certified Reliance Automax test chassis, apply variable 120V AC / 24V DC input across full operating range, verify no overcurrent, overheating or unexpected shutdown occurs
  3. I/O Channel Performance Test: Test all 16 optically isolated input channels and 16 relay output channels one by one, confirm every channel action performance meets official specifications, no contact adhesion or signal distortion occurs
  4. Programming Function Validation: Connect the module to certified AutoMax Programming Executive software, confirm UDC task creation, dual-port register configuration and on-line variable monitoring functions operate normally
  5. Compatibility Validation: Install the module in the same rack mixed with other existing Reliance drive control modules, confirm no backplane signal conflict or communication exception occurs
  6. Environmental Temperature Cycling: Place the module in an environmental chamber, run full functional validation across 0°C to +60°C operating range, confirm no performance degradation or unexpected fault trips at extreme temperature limits
  7. Vibration Resistance Test: Simulate industrial 5–500Hz vibration environment, confirm no loose internal components or unstable signal output occurs
  8. Final Documentation: Record all test metrics and performance data in the quality log, assign unique serial number traceability tag, and issue formal performance certification report before shipment

 

New Module Installation Guidelines

  1. Pre-Installation Preparation: Power down the target Automax control rack completely, confirm the system power supply is fully cut off, wear certified ESD wrist strap connected to the chassis grounding point before handling the module
  2. Slot Configuration: Insert the new 0-57170 UDC module into the designated slot in the Automax system rack, it can be mixed installed with other existing Reliance drive control modules in the same rack without signal conflict
  3. Mechanical Mating: Carefully align the module with the chassis DIN guide rails, push it smoothly into the slot until the rear edge connector fully mates with the system backplane, no extra mounting screws required
  4. Signal Cabling Connection: Connect all field I/O signal cables using shielded industrial cables, strictly separate low-level signal cables from high-power motor cables to eliminate electrical interference
  5. Power-Up and Initial Diagnostic: Restore power supply, observe front panel status LEDs; confirm the module completes boot process and enters normal running state within 60 seconds, verify the module appears online in the AutoMax Programming Executive software
  6. Full System Validation: Download the existing UDC task program to the new module, confirm all drive control loops operate correctly before transferring the industrial control system to normal operation mode

 

Application Scenarios and Features

  • Metallurgical Rolling Mill Drive Systems: Deployed in old rolling mill main drive and coiler DC drive systems, the independent high-speed UDC processing performance ensures high-precision tension closed-loop control, no system processing lag occurs
  • Large Industrial DC/AC Drive Systems: Used in mining and port large motor drive systems, the 16+16 full I/O configuration eliminates the need for additional expansion modules, drastically reducing system complexity
  • Heavy Industrial Production Line Legacy Drives: Applied in legacy drive production lines where the main mechanical body is still intact, avoiding the huge cost and long downtime of full drive system renovation
  • Legacy Reliance Automax System Modernization: Acts as the official drop-in replacement for older 0-57170 series UDC modules, preserving all existing backplane wiring and UDC task program configuration to minimize production line downtime during hardware replacement
  • General Industrial Automation Expansion: Provides a convenient way to add dedicated drive control I/O to an AutoMax PLC system, no extra control hardware required

 

Frequently Asked Questions

  1. Q: My module reports “Communication Fault” alarm after installation, what is the most common root cause?
    A: 90% of this fault is caused by improper backplane connector contact. First pull out the module, clean the backplane gold finger surface with isopropyl alcohol, re-insert it firmly into the slot, confirm no loose connection exists.
  2. Q: Can I install this module in the same rack mixed with other existing Reliance drive control modules?
    A: Yes, the 0-57170 is fully compatible with all AutoMax Processors, can be mixed with existing Reliance drive control modules in the same rack without signal conflict.
  3. Q: What are the supported power supply modes for this module?
    A: The 0-57170 supports 120V AC or 24V DC dual power supply mode, adapting to different industrial control cabinet power supply environments.
  4. Q: Is this module still in official production?
    A: No, this module has been officially discontinued for many years, Rockwell Automation no longer provides official new unit supply and full technical support, most available units on the market are new surplus industrial spare parts.