The ABB PU516 (3BSE013064R1) is a dedicated PCI engineering interface board designed for ABB Advant OCS legacy distributed control systems

  1. PU515 3BSE013063R1: Legacy 16-bit ISA bus version of the Advant engineering board, fully backward compatible with PU516 for older workstation upgrades
  2. CI854AK01 3BSE025349R1: ABB Profibus DP communication interface module, expanding fieldbus connectivity for Advant OCS systems
  3. CI867K01 3BSE043460R1: Industrial Ethernet communication module, adding modern gigabit Ethernet connectivity for Advant system modernization
  4. PM864AK01 3BSE018161R1: ABB AC 800M main CPU controller, the core processing unit for modern ABB 800xA DCS platforms
  5. MB300 Fieldbus Cable: ABB official certified MasterBus 300 shielded communication cable, for reliable connection between PU516 and Advant controller backplane
  6. Advant Station 100 Workstation: ABB dedicated industrial engineering workstation, the official certified host hardware for the PU516 interface board
  7. PU517 3BSE013065R1: High-performance variant with expanded 32MB onboard memory, supporting larger DCS project download and faster diagnostic data acquisition
  8. AC800M to Advant OCS Gateway Module: Protocol conversion gateway, enabling seamless interoperability between legacy Advant systems and modern 800xA automation platforms

 

Category: SKU: THE ABB PU516 3BSE013064R1 Brand:

Description

Product Core Overview

The ABB PU516 (3BSE013064R1) is a dedicated PCI engineering interface board designed for ABB Advant OCS legacy distributed control systems. As the critical communication bridge between engineering workstations and the Advant MasterBus 300 (MB300) industrial backplane, it enables high-speed system configuration, real-time diagnostics, program download and process data access for ABB DCS platforms. Manufactured in Sweden, it is the official certified engineering hardware for Advant Station 100 series workstations, widely deployed in legacy process control facilities worldwide to support long-term system maintenance and modernization operations .

 

Key Technical Specifications

  • Official Part Number: PU516, 3BSE013064R1, official exchange part identifier EXC3BSE013064R1
  • Product Category: Advant OCS MasterBus 300 PCI Engineering Interface Board
  • Bus Compatibility: 5V 32-bit/33MHz standard PCI bus, fully compliant with industrial PCI 2.2 specification
  • Communication Interfaces: 1 dedicated MasterBus 300 (MB300) industrial port, 1 isolated RS-232 serial port
  • Onboard Memory: 16MB dedicated local memory, optimized for high-speed DCS configuration data caching and transmission
  • Physical Parameters: 175mm × 107mm × 22mm dimensions, net weight only 380g, standard full-height PCI form factor
  • Power Requirements: 5V DC PCI slot power supply, maximum power consumption 5W, no additional external power adapter required
  • Operating Environment: -40°C to +100°C extended operating temperature range, -55°C to +125°C storage temperature, fully compliant with industrial EMC immunity standards
  • Compliance Status: RoHS exempted under industrial control legacy hardware provisions, HS Code 85437099, customs tariff code 853890
  • Country of Origin: Sweden, official ABB certified industrial communication module for Advant DCS systems

 

8 Recommended Related Series Models

  1. PU515 3BSE013063R1: Legacy 16-bit ISA bus version of the Advant engineering board, fully backward compatible with PU516 for older workstation upgrades
  2. CI854AK01 3BSE025349R1: ABB Profibus DP communication interface module, expanding fieldbus connectivity for Advant OCS systems
  3. CI867K01 3BSE043460R1: Industrial Ethernet communication module, adding modern gigabit Ethernet connectivity for Advant system modernization
  4. PM864AK01 3BSE018161R1: ABB AC 800M main CPU controller, the core processing unit for modern ABB 800xA DCS platforms
  5. MB300 Fieldbus Cable: ABB official certified MasterBus 300 shielded communication cable, for reliable connection between PU516 and Advant controller backplane
  6. Advant Station 100 Workstation: ABB dedicated industrial engineering workstation, the official certified host hardware for the PU516 interface board
  7. PU517 3BSE013065R1: High-performance variant with expanded 32MB onboard memory, supporting larger DCS project download and faster diagnostic data acquisition
  8. AC800M to Advant OCS Gateway Module: Protocol conversion gateway, enabling seamless interoperability between legacy Advant systems and modern 800xA automation platforms

ABB 3BSE013064R1 PU516

Professional Quality Control Test Standard Operating Procedure

  1. Pre-Test Visual Audit: Inspect the PCB for physical damage, bent PCI gold fingers, corroded communication port pins or loose components; confirm the full-height PCI mounting bracket is fully intact
  2. PCI Bus Compatibility Test: Insert the board into a certified industrial PCI test workstation, confirm the system correctly recognizes the hardware without resource conflict
  3. Power Stress Validation: Apply variable 5V DC input across 4.5V to 5.5V range, verify no overcurrent, overheating or unexpected shutdown occurs
  4. Firmware Integrity Check: Connect the ABB Advant Control Builder engineering software, confirm firmware signature matches the official ABB release baseline
  5. MB300 Communication Performance Test: Connect the board to a certified Advant controller test chassis, run 72-hour continuous project download and data transmission test, confirm zero packet loss
  6. RS-232 Serial Port Validation: Perform full loopback test for the RS-232 port, confirm all signal lines transmit and receive data correctly at maximum 115200 baud rate
  7. Environmental Temperature Cycling: Place the board in an environmental chamber, run full functional validation across -40°C to +100°C operating range, confirm no performance degradation
  8. Final Documentation: Record all test metrics in the official ABB quality log, assign unique serial number traceability tag, and issue formal performance certification report before shipment

 

New Module Installation Guidelines

  1. Pre-Installation Preparation: Power down the target Advant engineering workstation completely, unplug the AC power cord to eliminate electrical shock risk, wear certified ESD wrist strap connected to the workstation chassis grounding point
  2. PCI Slot Configuration: Remove the empty PCI slot rear bracket from the workstation chassis, select a free 5V 32-bit/33MHz PCI slot, ensure no adjacent slots are occupied by incompatible non-5V PCI devices
  3. Board Mating: Carefully align the PU516 board with the PCI slot guide rails, push it smoothly into the slot until the gold fingers fully mate with the PCI slot connector, then secure the mounting bracket to the chassis with the original screw
  4. Communication Cabling: Connect the official ABB shielded MB300 fieldbus cable between the MB300 port and the Advant DCS system controller backplane, single-point ground the cable shield at the DCS control cabinet end
  5. Power-Up and Driver Installation: Restore workstation power, boot the industrial engineering operating system, install the official ABB device driver, confirm the board appears normally in the Windows device manager
  6. System Communication Validation: Launch the Advant Control Builder engineering software, confirm the workstation successfully establishes stable communication with the Advant OCS DCS system, perform a small test project download to validate full functionality

 

Application Scenarios and Features

  • Legacy Advant OCS DCS System Maintenance: Deployed in petrochemical, power generation and pulp & paper facilities running ABB Advant OCS systems, providing the official certified engineering hardware for system configuration, diagnostic troubleshooting and routine maintenance operations
  • DCS Control Program Upgrade and Download: Used during Advant system modernization projects, enabling reliable full control project download to the Advant controller without communication dropout or data corruption
  • Real-Time Process Diagnostics: Delivering high-speed MasterBus 300 communication access for engineers to view real-time process variables, controller status and fault logs directly from the engineering workstation
  • Legacy System Spare Part Replacement: Acts as the official drop-in replacement for older units, preserving all existing fieldbus wiring and engineering workstation configuration to minimize system downtime during hardware failure replacement
  • Cross-Generation DCS Migration Support: Used during the migration process from legacy Advant OCS to modern ABB 800xA systems, providing stable communication access to extract historical configuration data and process parameters from the old Advant platform

 

Frequently Asked Questions

  1. Q: My board reports “MasterBus 300 Communication Timeout” after installation, what is the most common root cause?
    A: This fault is almost always caused by improperly terminated bus or damaged fieldbus cable. First check the bus termination resistor status and cable shield integrity, then re-validate the node address configuration in the Advant system settings.
  2. Q: Can I install this board in a modern PCIe-based industrial PC?
    A: No. The only supports 5V 32-bit/33MHz standard PCI slots, it is not electrically compatible with PCI Express (PCIe) slots. You must use a legacy industrial workstation with native 5V PCI slots for installation.
  3. Q: What is the maximum project download speed this board can achieve over ?
    A: The delivers maximum 10Mbps MasterBus 300 communication throughput, enabling full large-scale DCS project download within 10 minutes, far faster than legacy serial port engineering methods.
  4. Q: Does this board support all versions of ABB Advant Control Builder engineering software?
    A: Yes, the is fully compatible with all official releases of Advant Control Builder software, supporting all legacy Advant OCS system versions from V3.0 to the latest V6.5 release.