Description
Product Core Overview
The ABB CI871K01 (part number 3BSE056767R) is a high-performance PROFINET IO communication interface module belonging to the ABB AC 800M control system platform. As the dedicated PROFINET fieldbus gateway for the 800xA distributed control ecosystem, it delivers high-speed, redundant Ethernet-based PROFINET IO data exchange between the AC 800M controller and field PROFINET devices. Certified for ISA 71.04 G3 harsh industrial environments, it supports live operational hot-swapping, making it a mission-critical component widely deployed in process industries requiring maximum system uptime and resilient field network connectivity worldwide .
Key Technical Specifications
- Official Part Number: CI871K01
- Full Order Code: 3BSE056767R
- Manufacturer: ABB
- Product Platform: AC 800M / 800xA Distributed Control System
- Supported Protocol: Native PROFINET IO industrial Ethernet protocol, fully compliant with IEEE 802.3u 10/100 Base-Tx standard
- Data Transmission Rate: 10/100 Mbps full duplex auto-negotiation
- Physical Connectors: 2× RJ45 ports located on the dedicated TP867 baseplate
- System Capacity: Up to 12 CI871K01 modules can be connected to a single AC 800M controller via the CEX-Bus backplane
- Power Requirements: 160mA typical current consumption at 24V DC, 3.8W typical power dissipation
- Redundancy Feature: Dual independent Ethernet channels, supporting seamless network redundancy for uninterrupted data exchange even during single network path failure
- Operating Environment: 0°C to +55°C standard operating temperature, ISA 71.04 G3 harsh environment corrosion protection certification
- Physical Parameters: 186mm H × 59mm W × 127.5mm D dimensions, 0.7kg net weight, IP20 ingress protection rating
- Mounting Style: 35mm DIN rail mounting via the dedicated TP867 baseplate
- Hot-Swap Support: Full live operational hot-swap capability, no system shutdown required for module replacement
- Diagnostic Features: Dedicated RUN, FAULT, RxTx1 and RxTx2 status LEDs on front panel, providing real-time visibility into module health and communication status for quick on-site troubleshooting

CI871K01 3BSE056767R1
8 Recommended Related Series Models
- CI871K01 3BSE056797R1: Earlier hardware revision of the PROFINET IO interface module, fully backward compatible with the 3BSE056767R variant for legacy system retrofit
- PM861AK02: ABB AC 800M main processor module, the core control processing unit paired with this CI871K01 communication module
- CI854AK01: ABB AC 800M PROFIBUS DP communication interface module, expanding PROFIBUS fieldbus connectivity for the control system
- CI867K01: ABB AC 800M Modbus TCP communication interface module, supporting Modbus TCP protocol field device integration
- TP867: Dedicated DIN rail baseplate for CI871K01 module, providing mechanical mounting and backplane signal connection
- DI810: ABB S800 I/O digital input module, collecting discrete field signals for the PROFINET distributed I/O system
- DO810: ABB S800 I/O digital output module, executing discrete control commands to field PROFINET actuators
- AI810: ABB S800 I/O analog input module, collecting 4-20mA process variable signals for the PROFINET control network
Professional Quality Control Test Standard Operating Procedure
- Pre-Test Visual Audit: Inspect the module PCB for physical damage, bent backplane pins, corroded RJ45 ports or loose components; confirm all front panel status LEDs and DIN rail mounting clips are fully intact
- Power Stress Validation: Insert the unit into a certified ABB AC 800M test chassis, apply variable 24V DC input across 18V to 30V range, verify no overcurrent, overheating or unexpected shutdown occurs
- Firmware Integrity Check: Connect the ABB Control Builder M engineering software, confirm firmware signature matches the official ABB release baseline, validate no corruption in PROFINET protocol runtime
- Communication Performance Test: Connect the module to a certified PROFINET IO test network, run 72-hour continuous data transmission test, confirm zero packet loss and no communication dropout under industrial electrical noise simulation
- Redundancy Switchover Test: Configure dual Ethernet channel redundancy, force primary network path fault manually, validate seamless switchover completes with zero data loss and no control disruption
- System Compatibility Test: Connect the module to a PM861AK02 controller via CEX-Bus, confirm the controller recognizes the module correctly and establishes stable backplane communication
- Environmental Temperature Cycling: Place the module in an environmental chamber, run full functional validation across 0°C to +55°C operating range, confirm no performance degradation or unexpected fault trips at extreme temperature limits
- Final Documentation: Record all test metrics and performance data in the official ABB quality log, assign unique serial number traceability tag, and issue formal performance certification report before shipment
New Module Installation Guidelines
- Pre-Installation Preparation: Power down the target AC 800M control rack completely, confirm 24V DC power supply output is stable within 18–30V range, wear certified ESD wrist strap connected to the chassis grounding point before handling the module
- Baseplate Mounting: Secure the dedicated TP867 baseplate on the 35mm DIN rail in the control cabinet, maintain a minimum 50mm clearance around the module for proper heat dissipation, avoid installing adjacent to high-power heat-generating devices
- Module Mating: Carefully align the module with the TP867 baseplate guide rails, push it smoothly into the slot until the rear edge connector fully mates with the baseplate backplane, then lock the front panel mounting screws to recommended torque of 0.8Nm
- Communication Cabling: Connect the two PROFINET Ethernet ports using shielded industrial Ethernet cables, strictly separate PROFINET communication cables from high-power VFD motor cables to eliminate electrical interference
- Power-Up and Initial Diagnostic: Restore chassis power, observe front panel RUN LED; confirm it transitions from blinking to steady green within 30 seconds, verify the module appears online in the Control Builder M diagnostic utility
- PROFINET Device Commissioning: Scan and configure all connected PROFINET IO field devices in the engineering software, perform full I/O loop test, confirm all field devices communicate correctly before transferring the system to normal production operation mode
Application Scenarios and Features
- Petrochemical Process Control: Deployed in large-scale refinery and chemical production facilities, providing high-speed redundant PROFINET fieldbus connectivity for distributed I/O and smart field devices to maximize system uptime
- Automotive Assembly Lines: Used in automotive manufacturing robotic assembly lines, delivering low-latency PROFINET communication for high-speed motion control and safety device integration
- Power Generation Plant Control: Applied in thermal power and hydroelectric power plant control systems, enabling resilient PROFINET network connectivity for distributed field I/O and intelligent motor control centers
- Food & Beverage Production: Deployed in food and beverage processing facilities, supporting stable PROFINET communication for packaging lines, material handling and process control equipment
- Legacy AC 800M System Modernization: Acts as the official drop-in PROFINET expansion module for existing AC 800M control systems, enabling seamless PROFINET fieldbus integration without major hardware modification
Frequently Asked Questions
- Q: My module reports “PROFINET Communication Fault” after installation, what is the most common root cause?
A: 90% of this fault is caused by damaged or improperly terminated PROFINET Ethernet cable. First check the cable shield integrity and network switch port status, then re-validate the PROFINET device name and IP address configuration in the Control Builder M project. - Q: Can I replace an older 3BSE056797R1 unit with this 3BSE056767R directly without reconfiguration?
A: Yes, the 3BSE056767R variant is fully pin-compatible and functionally identical to the earlier 3BSE056797R1 revision, you can perform a direct drop-in replacement without any system configuration modification. - Q: What is the maximum number of PROFINET IO devices this module can support?
A: The can manage up to a full PROFINET IO device network, with a maximum of 12 modules deployable per single AC 800M controller to support large-scale distributed field device networks. - Q: Does this module support online hot-swap replacement without shutting down the running control system?
A: Yes, the is fully certified for live operational hot-swap, you can replace the faulty module online while the rest of the control system remains fully operational, ensuring zero unplanned production downtime.


