SIEMENS MOORE 16114-171 — MODULERAC Module Card Rack for the Moore APACS+/QUADlog DCS (Passive Backplane Chassis)

Related Product Recommendations

Model Description
16114-171/3, /4, /6, /7 MODULERAC rack slot-count variants — match the installed chassis before substitution
16103-series APACS+ rack power supply modules feeding the 24 V DC power bus
16115-series APACS+ analog input/output modules seated in the rack
ACM / PCM controllers APACS+ advanced control and processor modules
QUADlog modules Safety-controller-side cards sharing the APACS architecture
16416-1-2 / 16167-1-7 Moore marshalling termination units/assemblies downstream of the I/O
353D4F1NNETNNA4 / 383VA21N1F Moore Industries 353 controller / 383 display — legacy Moore control ecosystem
Siemens PCS 7 / PCS neo Documented migration platform for end-of-life APACS+/QUADlog systems
Category: Brand:

Description

SIEMENS MOORE 16114-171 — MODULERAC Module Card Rack for the Moore APACS+/QUADlog DCS (Passive Backplane Chassis)

16114-171

Brand & Model Title

Siemens Moore (Moore Products Co. heritage) 16114-171 — APACS+/QUADlog MODULERAC Module Card Rack / Power-Bus Backplane, 24 V DC Rack Power Distribution (Variants: 16114-171/3, /4, /6, /7 Slot Counts)​

The 16114-171 is not an I/O card, controller or communication module — it is the passive module card rack (MODULERAC)​ of the Moore APACS+/QUADlog distributed control system, the platform of Moore Products Co. (Spring House, Pennsylvania, USA) that Siemens acquired in 2003 (becoming Siemens Moore Process Automation). The rack provides mechanical card guides, the backplane interconnect, and the 24 V DC power-bus distribution for the APACS+ controller, I/O and communication modules seated in it. The slot-count suffix variants (/3, /4, /6, /7 — e.g., the 16114-171/6 six-slot execution) identify different chassis sizes and are not freely interchangeable.

 

Main Technical Specifications (compiled from convergent supplier documentation — verify per nameplate)

Parameter Value
Product type Module card rack / power-bus backplane chassis (passive DCS component)
Platform Moore APACS+/QUADlog distributed control system (Siemens Moore Process Automation lineage)
Manufacturer lineage Moore Products Co. (USA) → Siemens (2003 acquisition); legacy parts now served through Moore Industries and surplus channels
Function Mechanical mounting, backplane inter-module bus, 24 V DC power distribution to seated modules
Power bus 24 V DC; current capacity reported up to ~12 A on related rack variants
Slot capacity Variant-dependent — /6 = 6 slots; other related executions cited as 4-slot and 10-slot; confirm per assembly
Compatible modules APACS+ ACM/PCM controllers, AI/AO (16115-series), DI/DO, communication modules, 16103-series power supplies
Mounting Cabinet rack mount (DIN/panel compatible per original installation documentation)
Weight ~5.4–5.7 kg (chassis, supplier-reported)
Origin United States
Condition in trade Discontinued/legacy — supplied as new-surplus, unused or tested-refurbished with dealer warranties
⚠️ Caveat No public Siemens datasheet for this rack assembly; slot counts, current ratings and dimensions vary between listings and must be confirmed against the physical nameplate and APACS+ system manual

 

Typical Applications

  • APACS+/QUADlog DCS maintenance — replacement of failed or corroded rack backplanes in chemical, refining, oil & gas, power-generation and pharmaceutical installations still running the Moore platform
  • Loop-preserving rack swaps — replacing the chassis without stranding the installed population of proprietary APACS+ I/O cards, which fit no other vendor’s rack
  • Cabinet re-layouts and small sub-panel builds — the /3 and /4 compact executions for remote cabinets and skid-local I/O
  • Fleet spare strategy — stocking one verified rack chassis per cabinet type protects a module asset base worth multiples of the rack’s cost

 

Related News & Events

  • Platform lineage and sunset:​ Moore Products’ APACS+ and QUADlog (safety PLC) systems passed to Siemens with the 2003 acquisition; the platform has since been superseded by Siemens PCS 7/PCS neo, and the 16114-171 rack is discontinued — supply is exclusively new-surplus/refurbished stock. Siemens’ documented migration path for APACS+ users is PCS 7 with conversion tooling.
  • Moore Industries’ role in the legacy ecosystem:​ Moore Industries (Houston) today serves the legacy Moore heritage — the 353-series process automation controller (353D4F1NNETNNA4 etc.), 383-series display controllers and marshalling/termination assemblies (16416-1-2, 16167-1-7) — making it the first technical reference point for APACS-era part identification.
  • Market caution — fabricated listings:​ this reference attracts heavily AI-generated, mutually contradictory descriptions: “16-in/16-out digital input module, IP67”, “6-channel Profinet control card with M8 connectors and Ex d Zone 1 rating”, “memory card, made in Germany”, “Modbus RTU signal processor, 50 mA per channel”. None of these are real. The authoritative identity, consistent across multiple independent sources, is the APACS+/QUADlog MODULERAC passive card rack.
  • Procurement discipline:​ a failed backplane disables an entire rack of I/O simultaneously, so verified spare racks command premiums; insist on backplane connector inspection (pin corrosion/oxidation), power-rail continuity testing, serial/revision traceability, and match the exact slot-count suffix to the cabinet layout before ordering.
  • Field engineering notes:​ depopulate and LOTO the rack before swap; while the rack is out, audit the 16103-series power supplies (marginal supplies are the most common root cause of “backplane faults”), clean module connector pins, and confirm controller firmware compatibility with the replacement rack revision before re-commissioning.