Description
OKOS AL8XGTE-3 High‑Speed 8-bit 3 GS/s PCIe Digitizer / A/D Acquisition Card
Executive Summary
The OKOS AL8XGTE-3 is a single-channel high-speed PCI Express digitizer board designed for ultra-fast analog-to-digital signal capture. Featuring 8-bit resolution and a sampling rate up to 3 GS/s, this PCIe x1 board delivers high bandwidth signal acquisition for ultrasonic inspection, non-destructive testing (NDT), high-speed transient recording and radar signal capture. It integrates large on-board acquisition memory and multiple flexible trigger sources, supporting pre-trigger and post-trigger capture to record waveform data before and after an event trigger. Supplied with a complete Windows SDK and programming libraries for C/C++, C# and LabVIEW, the card can be seamlessly embedded into custom measurement systems. Original OEM production has been discontinued; fully tested refurbished units are available for equipment spare replacement, system retrofit and lab instrumentation maintenance projects.

AL8XGTE-3
Core Technical Specifications
- Brand: OKOS Solutions
- Model: AL8XGTE-3
- Device Type: PCI Express High-speed Digitizer / A/D Acquisition Card
- Bus Interface: PCI Express x1
- Resolution: 8-bit
- Sampling Rate: 250 kS/s up to 3 GS/s
- Channel: 1 analog input channel
- Onboard Memory: Configurable, 512M samples to 2G samples
- Input Connector: BNC analog input
- Trigger Sources: Software trigger, external BNC trigger, orthogonal encoder input, internal TTL trigger
- Capture Mode: Pre-trigger and post-trigger recording
- Supported OS: Windows
- Software Support: SDK, drivers, programming libraries for C/C++, C#, LabVIEW
- Dimension: Standard full-height PCIe form factor
- Operating Temperature: 0°C ~ +50°C (commercial grade)
- Power: Powered via PCIe slot
Key Features & Benefits
- Ultra High Sampling Rate up to 3 GS/s: Captures fast transient signals and high-frequency waveforms for ultrasonic and pulsed signal applications.
- Large On-Board Acquisition Memory: 512M to 2G sample buffer supports long waveform recordings without continuous PCIe bus streaming bottlenecks.
- Flexible Multi-Mode Triggering: Multiple trigger sources including external BNC and encoder input, suitable for synchronized inspection and test sequences.
- Pre & Post-Trigger Data Capture: Records signal data both before and after the trigger event for complete waveform analysis of transient faults.
- PCIe x1 Low-Latency Interface: Simple slot installation in standard PC workstations without requiring high-bandwidth PCIe x4/x8 slots.
- Comprehensive Software Development Kit: Ready-made drivers and libraries reduce development time for custom test and measurement applications.
- Single-Channel High Bandwidth Input: Optimized for focused high-speed signal capture in ultrasonic non-destructive testing.
- Robust Instrument-Grade Design: Built for continuous lab and industrial test operation, ideal for legacy ultrasonic scanning system maintenance.
Application Scenarios
- Ultrasonic non-destructive testing (NDT) and phased array inspection systems
- High-speed transient waveform capture and pulsed signal analysis
- Radar and LIDAR signal acquisition research
- Material defect scanning and ultrasonic imaging
- Aerospace component inspection test benches
- Industrial high-speed vibration and shock measurement
- Scientific laboratory high-frequency data recording
- Legacy OKOS ultrasonic scanning equipment spare replacement & upgrade
Related Model Recommendations (8 Models)
- AL8XGTE-2: Dual-channel variant of AL8xGTE series, 8-bit high-speed digitizer
- AL8XGTE-1: Single-channel 1GS/s PCIe digitizer, lower bandwidth cost-effective version
- AL12XGTE: 12-bit high-resolution PCIe digitizer for applications requiring higher amplitude accuracy
- AL4XGTE: 4-channel high-speed A/D card for multi-sensor synchronized acquisition
- AL8PCI: Older PCI-bus 8-bit digitizer, legacy replacement for pre-PCIe OKOS systems
- AL8XGTE-4: Enhanced AL8xGTE variant with extended memory buffer
- AL8XPCIE: General-purpose high-speed PCIe digitizer for transient recording
- AL16XGTE: 16-bit high precision digitizer for low-noise signal measurement

AL8XGTE-3
FAQ
Q1: What is the main purpose of the OKOS AL8XGTE-3?
A: It is a high-speed PCIe digitizer for capturing ultra-fast analog waveforms, widely used in ultrasonic NDT, transient signal recording and high-frequency test measurement systems.
Q2: What is the maximum sampling speed and resolution?
A: The AL8XGTE-3 provides 8-bit resolution with sampling rates adjustable from 250 kS/s up to 3 GS/s.
Q3: What trigger options are available?
A: It supports software trigger, external BNC hardware trigger, orthogonal encoder trigger and internal TTL trigger. Pre-trigger and post-trigger waveform capture are supported.
Q4: How much onboard memory does AL8XGTE-3 have?
A: Onboard acquisition memory can be configured from 512M samples up to 2G samples for long waveform capture.
Q5: What software and programming environments are supported?
A: Windows OS supported. OKOS provides SDK and drivers, compatible with C/C++, C# and LabVIEW for custom application development.
Q6: Can be installed into a standard desktop PC?
A: Yes, it uses PCIe x1 interface and fits standard full-height PCIe slots in Windows workstations.
Q7: What is the difference between and AL8XGTE-2?
A: is single-channel 3GS/s, while AL8XGTE-2 is dual-channel model; both belong to the AL8xGTE product family.
Q8: Is original OKOS manufacturing still available for ?
A: Original OEM production has been discontinued. Fully tested refurbished boards are in stock, with technical consultation available for spare replacement and ultrasonic system migration.

