Description
HIMA F8652X Safety-Related Central CPU Module
Executive Summary
The HIMA F8652X is a SIL 3 certified safety CPU module developed by HIMA Paul Hildebrandt GmbH, designed for HIMA HIMatrix safety instrumented systems. Adopting dual 32-bit lockstep processor architecture, it executes safety logic, processes field signal data and manages system diagnostics for safety-critical industrial facilities. This module features integrated 4-digit diagnostic display, dual isolated RS485 communication ports and built-in safety watchdog, supporting hot-swap maintenance and redundant power input. It complies with IEC61508 / IEC61511 standards and is widely deployed for ESD, F&G, burner management and turbomachinery protection applications in process industries.
Core Technical Specifications
- Manufacturer: HIMA (Germany)
- Model: F8652X, Part No. 984865265
- Safety Level: SIL3 (IEC 61508, IEC 61511)
- Processor: Dual 32-bit lockstep CPU, 25MHz
- Memory: 1MB Flash-EPROM for OS, 1MB SRAM for data, 512kB Flash for user safety program
- Power Supply: 24VDC nominal, redundant power input
- Communication: 2 x electrically isolated RS485 serial interfaces
- Indicator: 4-digit alphanumeric diagnostic display + status LED indicators
- Form Factor: 8SU European standard card
- Operating Temperature: 0 ~ +60℃
- Storage Temperature: -40 ~ +85℃
- Relative Humidity: ≤95%, non-condensing
- Protection Class: IP20
- Backup Battery: CR2477N, recommended replacement cycle every 4 years
- Safety Watchdog: 24VDC fail-safe output, short-circuit protected
Main Features & Advantages
- Dual lockstep safety architecture:Two processors run synchronously and perform continuous cross-comparison, ensuring fail-safe response once discrepancy detected.
- SIL3 full certification:Meets the highest safety integrity requirement for process safety instrumented systems.
- Comprehensive onboard diagnostics:Real-time monitoring of CPU, memory, bus and I/O status, error codes displayed on front panel for fast troubleshooting.
- Isolated RS485 interfaces:Dual independent serial ports improve anti-interference ability for industrial field bus communication.
- Hot-swap support:Module replacement without shutdown of the whole safety system, maximize plant availability.
- Integrated safety watchdog:Forced safe state output upon internal fault, preventing hazardous operation.
- Compact European card design:Easy rack installation, compatible with HIMatrix series safety racks.
- Long service life & low maintenance:Only periodic battery replacement required for long-term stable operation.
Application Scenarios
- Emergency Shutdown System (ESD) for oil & gas platforms, refineries and chemical plants
- Fire & Gas (F&G) detection and protection systems
- Boiler & burner management safety control (BMS)
- Turbine & compressor machinery protection
- Power plant safety interlock and protection
- LNG storage and terminal safety instrumented systems
- Pharmaceutical and fine chemical safety interlock control
Recommended Related Models (8pcs)
- HIMA F8650X Safety CPU Module
- HIMA F8650E Central Module
- HIMA F8627X Communication Module
- HIMA F3110 Digital Input Module
- HIMA F3210 Digital Output Module
- HIMA F3330 Analog Input Module
- HIMA F8010 Power Supply Module
- HIMA F8621 Safety Communication Card
FAQ
Q1: What safety level can HIMA F8652X achieve? A: It is certified SIL3 per IEC61508 and IEC61511, suitable for safety instrumented systems up to SIL3.
Q2: Can F8652X work with third-party non-HIMA I/O modules? A: No. For SIL-rated safety systems, only original HIMA certified I/O modules are allowed to pair with F8652X.
Q3: What action will be triggered if the watchdog detects internal fault? A: The watchdog will cut off safety output and force the whole system into predefined safe state to avoid hazard.
A: Yes, it supports hot swapping. Operators can replace the module without stopping the safety system.
Q5: What is the service life of backup battery? A: The CR2477N buffer battery can last around 2500 days at 25℃ ambient temperature. HIMA recommends replacement every 4 years.
A: Use the two front-panel navigation buttons to browse the 4-digit diagnostic display. Error codes will be shown for fault diagnosis. Press ACK button to reset alarm after fault removal.
A: It belongs to classic HIMatrix CPU series, many units have entered end-of-service phase. New spare parts are mainly original stock.
Q8: What communication protocol does the RS485 port support? A: The dual isolated RS485 interfaces are used for internal HIMA safety bus communication to connect I/O modules and expand system nodes.




