Description
HIMA F8650X SIL3 Safety Central CPU Module for H51q / H41q PES System
Executive Summary
The HIMA F8650X is a certified safety central CPU module designed for HIMA H51q and H41q programmable electronic safety systems. It adopts dual lockstep 32-bit Intel 386EX processor architecture, dedicated to executing safety application logic, processing field I/O signals, managing system diagnostics and internal bus communication. With SIL3 certification complying with IEC 61508 & IEC 61511, it integrates 4-digit matrix diagnostic display, dual electrically isolated RS485 ports and safety watchdog output. Hot-swap capability enables on-line maintenance without system shutdown. Widely used for ESD, F&G, BMS and turbomachinery protection within oil, gas, chemical and power industries.
Core Technical Specifications
- Manufacturer: HIMA Paul Hildebrandt GmbH (Germany)
- Model: F8650X, Order Code:984865065 / 984865066
- Compatible Platform: H51q-MS / H51q-HS / H51q-HRS & H41q safety PES
- Safety Certification: SIL3 (IEC 61508, IEC 61511)
- Processor: Dual 32-bit Intel 386EX lockstep CPU, 25MHz
- Memory: 1MB Flash-EPROM for OS, 1MB Flash-EPROM for user safety program, 1MB SRAM data memory
- Communication: 2 x electrically isolated RS485 serial interfaces for safety backplane bus
- Front Panel: 4-digit matrix diagnostic display + multi-status LED indicators
- Watchdog: 24VDC safety watchdog output, max 500mA, short-circuit protected
- Form Factor: 8SU European standard double PCB card
- Power Consumption: 5VDC, 2A via rack backplane
- Operating Temperature: 0℃ ~ +60℃
- Storage Temperature: -40℃ ~ +85℃
- Relative Humidity: ≤95%, non-condensing
- Protection Class: IP20
- Backup Battery: CR2477N for real-time clock & data retention
- Weight: Approx. 0.32kg
Main Features & Advantages
- Dual lockstep fault-tolerant architecture: Synchronous operation of two processors with continuous cross-comparison. The system will switch to safe state once mismatch is detected.
- TÜV SIL3 certification: Meets functional safety requirements for high-risk process safety instrumented systems.
- Comprehensive onboard self-diagnostics: Continuously monitors CPU, memory, bus, power and I/O channels. Fault codes shown on front panel for rapid troubleshooting.
- Isolated dual RS485 ports: Reinforces noise immunity in heavy electromagnetic interference industrial sites, connecting local I/O modules.
- Hot-swap support: Module replacement while safety system remains online, minimizing plant downtime.
- Hardware safety watchdog: Hardware-level fail-safe mechanism to cut safety outputs and trigger predefined safe state upon internal fault.
- Compact 8SU European card design: Simple rack installation, fits standard HIMA safety chassis.
- Stable deterministic execution: Fixed scan cycle for safety logic, guaranteeing consistent response time for safety interlock actions.
Application Scenarios
- Emergency Shutdown System (ESD) for refineries, offshore oil & gas platforms
- Fire and Gas (F&G) hazard monitoring & protection systems
- Boiler and Burner Management System (BMS) safety interlock
- Gas turbine, steam turbine and compressor machinery protection
- Power plant safety interlock and protection control
- LNG terminal and storage tank safety instrumented systems
- Fine chemical and pharmaceutical plant safety shutdown control
Recommended Related Models (8pcs)
- HIMA F8652X Safety CPU Module
- HIMA F8650E Central CPU Module
- HIMA F8627X Safety Communication Module
- HIMA F3110 Digital Input Module
- HIMA F3210 Digital Output Module
- HIMA F3330 Analog Input Module
- HIMA F8010 Rack Power Supply Module
- HIMA F8621 Serial Communication Card
FAQ
Q1: What safety level does HIMA F8650X achieve? A: It holds SIL3 certification per IEC 61508 / IEC61511, applicable to safety loops up to SIL3.
Q2: Which HIMA safety systems is F8650X compatible with? A: It serves as the main central module for HIMA H51q and H41q series programmable electronic safety systems.
Q3: Does F8650X support hot swap? A: Yes. Hot-swap is available. Operators can replace the module without stopping the safety system.
Q4: What is the function of the watchdog output? A: The 24V watchdog output is a safety-related hardware signal. If CPU fault occurs, the watchdog will de-energize the output and force the whole system into safe state.
A: It belongs to legacy HIMA H51q series. Original new production has ceased. Available stock is original factory spare inventory.
Q6: What are the RS485 ports used for? A: The dual isolated RS485 interfaces are dedicated internal safety bus for communication between CPU and HIMA I/O modules, not for direct connection to general HMI.
A: No. To maintain SIL certification, only original certified HIMA I/O modules are permitted for system configuration.
Q8: What is the service cycle of the backup battery? A: The CR2477N battery retains RTC and memory data. Recommended replacement cycle is 4 years.





