GE IS420YDOAS1B (YDOA) Discrete Output I/O Pack for Mark VIe / Mark VIeS Turbine Control System

  1. IS420YAICS1B (YAIC): Mark VIe analog I/O pack
  2. IS420YDIAS1B (YDIA): Mark VIe discrete input I/O pack
  3. IS420UCS32A: Mark VIe main controller
  4. IS420UCS22B: Compact Mark VIe controller variant
  5. IONet: Mark VIe dedicated high-speed I/O Ethernet network
  6. Mark VIeS: Functional safety version of Mark VIe platform
  7. IS420YDOBS1B: Alternative revision discrete output pack
  8. Speedtronic Mark VIe: GE turbine control platform
Category: SKU: GE IS420YDOAS1B Brand:

Description

GE IS420YDOAS1B (YDOA) Discrete Output I/O Pack for Mark VIe / Mark VIeS Turbine Control System

 

Product Overview

IS420YDOAS1B (YDOA) is a high-performance safety-rated discrete output I/O pack designed for GE Speedtronic Mark VIe and Mark VIeS distributed turbine control platform. It acts as the interface between the Mark VIe controller IONet Ethernet network and external discrete relay terminal boards. This I/O pack integrates an on-board processor and output acquisition circuitry to execute on/off control commands from the main turbine controller, driving field relays, solenoids, trip coils and auxiliary actuators. It supports simplex, duplex and TMR triple modular redundant deployment for safety-critical turbine protection loops. Built with continuous hardware diagnostics and relay coil monitoring, it is widely deployed in power generation gas/steam turbine control cabinets and commonly used as spare part for maintenance, overhaul and retrofit of legacy Mark VIe systems.

IS420YDOAS1B

Technical Parameters

 

Item Specification
Part Number IS420YDOAS1B (YDOA)
Manufacturer General Electric (GE)
System Platform Mark VIe / Mark VIeS Speedtronic Turbine Control
Module Type Discrete Output I/O Pack
Communication Dual 100Mbps IONet Ethernet ports (deterministic I/O network)
Power Supply 24VDC auxiliary power
Redundancy Mode Simplex, Duplex, TMR triple redundant configuration
Diagnostic Relay/coil monitoring, hardware self-test, channel fault detection
Response Time 6ms typical I/O pack response
Operating Temperature -40°C ~ +70°C, non-condensing
Relative Humidity 5% ~95% non-condensing
Safety Compliance IEC 61508 SIL capable
Mounting Plug onto dedicated Mark VIe terminal board assembly
Weight Approx. 0.34 kg
Dimensions 82.55 × 41.91 × 121.43 mm

 

Main Features

  1. Dedicated discrete output I/O pack for GE Mark VIe / Mark VIeS gas and steam turbine control systems.
  2. Dual IONet Ethernet interfaces for high-speed, deterministic communication with the Mark VIe main controller.
  3. Supports TMR triple modular redundant architecture for safety interlock and turbine trip protection circuits.
  4. Built-in relay and coil monitoring function to detect open or shorted field coil faults.
  5. Continuous hardware self-diagnosis to identify pack faults, communication failures and output channel abnormalities.
  6. Compatible with multiple types of relay terminal boards to match different field actuator wiring requirements.
  7. Rugged compact hardware construction, designed to withstand vibration, EMI and wide temperature ranges in power plant cabinets.
  8. Receives control logic commands from turbine controller and outputs discrete signals to trip relays, solenoid valves and auxiliary contactors.
  9. Hot-swappable hardware, can be replaced under proper operational procedures without full system shutdown.
  10. OEM spare I/O pack for power plant turbine control maintenance, spare inventory and Mark VIe system retrofits.

 

Application & Industry Scenarios

Application Information

IS420YDOAS1B communicates with the Mark VIe main controller over the IONet network. It receives discrete control commands and drives external relay outputs for turbine control and protection. It executes critical functions such as turbine trip logic, emergency shutdown, valve solenoid actuation, auxiliary motor and pump on/off control. The coil monitoring circuit continuously checks field wiring health and reports faults to the control system. For high safety requirements, three packs can be configured as TMR voting to reduce spurious trip risk for turbine protection loops.

Typical Industries

  • Thermal power plant steam turbine Mark VIe control systems
  • Combined cycle power plant gas turbine control & ESD protection
  • Hydroelectric turbine auxiliary control and interlock cabinets
  • Oil & gas gas turbine generator and compressor control packages
  • Industrial captive power plant turbine safety interlock systems
  • Power station Mark VIe control cabinet spare parts & retrofit projects

 

Matching / Supporting Components

  1. Mark VIe main controller module (IS420UCS series)
  2. Mark VIe relay output terminal boards for YDOA pack
  3. IONet Ethernet cables / fiber accessories for I/O network
  4. 24VDC redundant power supply unit for control rack
  5. Mark VIe control rack chassis and mounting hardware
  6. Turbine trip relay, solenoid valve and coil assemblies
  7. GE Toolbox / Mark VIe engineering & diagnostic software
  8. I/O terminal blocks and shielded field wiring cables

 

Related GE Mark VIe Reference Models

  1. IS420YAICS1B (YAIC): Mark VIe analog I/O pack
  2. IS420YDIAS1B (YDIA): Mark VIe discrete input I/O pack
  3. IS420UCS32A: Mark VIe main controller
  4. IS420UCS22B: Compact Mark VIe controller variant
  5. IONet: Mark VIe dedicated high-speed I/O Ethernet network
  6. Mark VIeS: Functional safety version of Mark VIe platform
  7. IS420YDOBS1B: Alternative revision discrete output pack
  8. Speedtronic Mark VIe: GE turbine control platform