Description
FANUC A06B-6150-H100 Alpha i AIPS-100HV High Voltage Power Supply Module
Product Overview
The A06B-6150-H100 is FANUC Alpha i series high-voltage power supply module (AIPS-100HV), the central power unit for FANUC Alpha i servo & spindle amplifier system for high-power CNC machine tools. It converts three-phase 400~480V AC mains into stable high-voltage DC bus power to supply multiple servo amplifiers and spindle amplifiers. This unit integrates power rectifier, energy regenerative braking circuit, protection and monitoring logic. It feeds DC bus to the downstream αi servo and spindle drive modules, absorbs regenerative energy generated during motor deceleration, and delivers stable power for heavy-duty milling, turning and multi-axis machining centers. It works with FANUC 30i / 31i / 32i CNC control systems.

A06B-6150-H100
Technical Parameters
| Item | Specification |
|---|---|
| Part Number | A06B-6150-H100 |
| Manufacturer | FANUC |
| Model Designation | AIPS-100HV, Alpha i power supply |
| Input | 3-phase AC 400–480V, 50/60Hz |
| Rated Input Current | 206A |
| DC Bus Output | 565 ~ 679 VDC |
| Rated Power Capacity | 110kW |
| Cooling Method | Forced air fan cooling |
| Mounting | Panel mount inside CNC electrical cabinet |
| Operating Temperature | 0 ~ +55°C, non-condensing |
| Protection Functions | Overvoltage, undervoltage, overcurrent, overheat, short-circuit, fan failure detection |
| Communication | Internal optical bus communication with CNC and amplifier modules |
| Compatible System | FANUC Alpha i servo / spindle amplifiers, 30i-B / 31i-B CNC controllers |
Main Features
- High power 110kW HV power supply, supplies DC bus for multiple servo and spindle amplifier modules simultaneously.
- Built-in regenerative braking function to recover motor kinetic energy during deceleration, reduce power consumption and heat generation.
- Wide 400–480V three-phase industrial AC input, suitable for heavy machine shop power grid.
- Comprehensive multi-layer hardware protection: over-voltage, under-voltage, over-current, over-temperature and fan fault alarm.
- Front panel LED status indicators for power, run and fault alarms, fast onsite troubleshooting.
- Optical fiber internal communication link between power supply, amplifiers and CNC controller for high noise immunity.
- Modular separated drive architecture, easy capacity expansion by adding extra servo/spindle amplifier units on the same DC bus.
- Rugged industrial construction, designed for continuous heavy-load operation in machine tool workshop environment.
- Standard spare part for large 5-axis machining centers, heavy-duty lathes and gantry machine tools.
- Supports FANUC CNC diagnostic software for fault log reading and maintenance monitoring.
Application & Industry Scenarios
Application Information
The A06B-6150-H100 acts as the main power source for Alpha i drive groups. It rectifies 3-phase high voltage AC into regulated DC bus voltage to feed servo and spindle amplifiers. When axes decelerate, the module feeds regenerative energy back to the grid. It continuously monitors DC bus voltage, input current and internal temperature, triggers protection and alarm once abnormal conditions detected to protect servo amplifiers and spindle motors.
Typical Industries
- Heavy-duty CNC machining centers and 5-axis machine tools
- Large gantry milling machines and vertical turning lathes
- Automotive mold and die machining equipment
- Aerospace structural component processing machines
- Heavy industry precision metal cutting production lines
- Large energy equipment component machining centers
Matching / Supporting Components
- Alpha i servo amplifier modules: A06B-6124-H series
- Alpha i spindle amplifier modules: A06B-6141-H series
- FANUC CNC controller unit: 30i-B / 31i-B series
- Alpha i high-power servo motors and spindle motors
- FANUC emergency stop and safety relay modules
- Cabinet cooling fans and air filter assemblies
- FANUC CNC PMC and diagnostic software
- DC bus connection busbars and power cables
Related FANUC Alpha i Reference Models
- A06B-6150-H060: 60kW Alpha i HV power supply
- A06B-6150-H075: 75kW Alpha i HV power supply
- A06B-6150-H090: 90kW Alpha i HV power supply
- A06B-6124-H209: Alpha i servo amplifier
- A06B-6141-H022: Alpha i spindle amplifier
- A06B-6110-H055: Alpha i low voltage power supply
- A02B-0338-B500: FANUC 30i-B CNC main unit
- A06B-0289-B100: Alpha i high torque servo motor

