Description
Bently Nevada 3500/15-04-00-00 (133300-01) Low Voltage DC Power Supply Module

3500/15-04-00-00 133300-01
Product Core Introduction
The Bently Nevada 3500/15-04-00-00, incorporating the 133300-01 power supply unit, is a half-height Low Voltage DC Power Supply module designed for the Bently Nevada 3500 Machinery Protection System rack. It provides stable and reliable 24 VDC (nominal) power to all monitor modules installed within the 3500 chassis.
Specifically configured with the “04” option, this module accepts a legacy low voltage DC input range of 20 to 30 VDC, making it ideal for industrial environments where only DC power sources are available or preferred for enhanced reliability during AC power fluctuations. The module supports redundant configuration, allowing two power supplies to be installed in a single rack (one primary, one backup) to ensure continuous operation of critical machinery protection systems in oil & gas, power generation, and chemical processing facilities.
Primary Technical Specifications
- Official Part Number: 3500/15-04-00-00
- Component Part Number: 133300-01 (DC Power Supply Unit)
- Product Family: Bently Nevada 3500 Series Machinery Protection System
- Module Type: Half-Height Low Voltage DC Power Supply
- Input Voltage Range: 20 to 30 VDC (Legacy Low Voltage DC)
- Output Voltage: Regulated 24 VDC for 3500 Rack Backplane
- Power Capacity: Capable of powering a full 3500 rack with mixed monitor modules
- Redundancy Support: Supports dual power supply configuration (Primary/Backup) in a single rack
- Installation Slot: Must be installed in designated power supply slots on the left side of the 3500 rack
- Physical Dimensions: Approx. 25.15 cm (L) × 5.08 cm (W) × 12.07 cm (H)
- Weight: Approx. 1.39 kg (module weight)
- Agency Approvals: Standard industrial certifications (specific approvals depend on the “00” option code, indicating no specific additional agency approval in this configuration)
Configuration Code Breakdown (3500/15-04-00-00)
- 3500/15: Power Supply Module Family
- 04: Top Slot Power Supply Type = Legacy Low Voltage DC (20-30 VDC)
- 00: Bottom Slot Power Supply Type = No Supply (This is a single half-height module; if a second module were present, this code would define it)
- 00: Agency Approval Option = None/Standard
(Note: The part number 133300-01 refers to the specific internal DC power supply component or assembly within the 3500/15 module housing.)
Quality Control Procedures
Every Bently Nevada 3500/15 power supply module undergoes rigorous testing to ensure reliability in critical applications:
- Input Voltage Stress Testing: Modules are tested across the full 20-30 VDC input range to ensure stable 24 VDC output under varying line conditions.
- Load Regulation Verification: Each unit is verified to maintain output voltage within tight tolerances under full rack load conditions.
- Redundancy Switchover Testing: For systems with dual supplies, the seamless transfer from primary to backup power is validated to ensure zero interruption to monitor modules.
- Thermal Performance Validation: Modules undergo thermal cycling to ensure reliable operation within the specified industrial temperature range.
- Safety Compliance Testing: Electrical isolation and safety standards are verified to protect both equipment and personnel.
Related Model Recommendations
- Bently Nevada 3500/15-01-00-00: AC Power Supply Module (120/240 VAC), alternative for facilities with standard AC power.
- Bently Nevada 3500/15-02-00-00: High Voltage DC Power Supply Module (48-125 VDC), for facilities with higher voltage DC distributions.
- Bently Nevada 3500/22M: Transient Data Interface (TDI) Module, essential for system communication and configuration.
- Bently Nevada 3500/42M: Proximitor Monitor Module, a common load powered by the 3500/15.
- Bently Nevada 3500/32: Relay Output Module, for alarm and trip actuation.
- Bently Nevada 3500/92: Communication Gateway Module, for integrating with DCS/SCADA systems.
- Bently Nevada 3500/04: Earthing I/O Module, required for grounding internal barriers in hazardous area modules.
- Bently Nevada 3500 Rack Chassis: The physical enclosure required to house the power supply and monitor modules.
Brand Development History
Bently Nevada, now part of Baker Hughes, has been the global leader in machinery protection for over 60 years. The 3500 Series was introduced as a modular, flexible, and highly reliable platform for monitoring critical rotating equipment. The 3500/15 Power Supply module was designed to provide robust power options for this system, accommodating various industrial power standards including AC, Low Voltage DC, and High Voltage DC. The 3500/15-04-00-00 variant specifically addresses the needs of facilities utilizing 24 VDC control power systems, ensuring compatibility and reliability in diverse industrial environments.
Frequently Asked Questions
- Q: What is the input voltage range for the 3500/15-04-00-00 module?
A: The “04” configuration indicates a Legacy Low Voltage DC input range of 20 to 30 VDC. - Q: Can I install two 3500/15-04-00-00 modules in one rack for redundancy?
A: Yes, you can install two power supply modules in a single 3500 rack. The lower slot acts as the primary supply, and the upper slot acts as the backup. Both can be the same type (DC/DC) or different types (e.g., AC/DC) depending on availability and requirements. - Q: What does the part number 133300-01 refer to?
A: 133300-01 is the specific part number for the DC power supply component or assembly used within the 3500/15-04-00-00 module housing. - Q: Is the 3500/15 module hot-swappable?
A: Yes, the 3500/15 power supply module is designed for hot-swapping. If a redundant backup supply is installed, the primary supply can be replaced without shutting down the system. Even with a single supply, careful replacement may be possible depending on system criticality, but redundancy is recommended for live maintenance. - Q: Where must the 3500/15 module be installed in the rack?
A: The 3500/15 power supply modules must be installed in the designated power supply slots located on the left side of the 3500 rack chassis.


