Applied Materials 0010-23715 300mm Slit Valve Door

  1. 0010-23716 – AMAT 200mm variant slit valve door, the smaller form factor version for 200mm legacy semiconductor process systems
  2. 0020-31457 – AMAT slit valve door replacement seal kit, the dedicated consumable maintenance part that restores full sealing performance for the 0010-23715 valve
  3. 0010-12874 – AMAT pneumatic valve drive actuator, the matched pneumatic drive unit that provides precise opening/closing motion control for the 0010-23715 slit valve door
  4. 0010-76543 – AMAT electric slit valve motor drive assembly, the electric actuation variant for systems that require fully electric valve operation without pneumatic air supply
  5. 0040-52678 – AMAT slit valve position feedback sensor kit, the dedicated position monitoring unit that provides real-time valve open/closed status signals to the system controller
  6. 0010-45621 – AMAT Centura® GATE process chamber shield kit, the matched chamber protection component that works alongside the 0010-23715 slit valve in the same process module
  7. 0010-89765 – AMAT Endura® PVD wafer transfer robot interface board, the control unit that synchronizes wafer transfer motion with the 0010-23715 slit valve door opening/closing sequence
  8. 0021-12345 – AMAT slit valve door manual maintenance tool set, the dedicated service tool kit for safe disassembly, installation and sealing surface inspection of the 0010-23715 valve
  9. 0010-67892 – AMAT Producer® GT chamber pressure sensor, the monitoring unit that verifies full vacuum sealing performance after the 0010-23715 slit valve door closes
  10. 0030-45123 – AMAT slit valve door spare parts storage case, the dedicated cleanroom-grade sealed storage container for storing unused 0010-23715 valves to prevent particle contamination before installation
Category: Brand:

Description

Applied Materials 0010-23715 300mm Slit Valve Door

 

Executive Brief

The AMAT 0010-23715 is a high-precision 300mm slit valve door purpose-built by Applied Materials for semiconductor wafer vacuum transfer systems. Designed to deliver micron-level sealing accuracy, it supports high-frequency rapid opening/closing cycles to maintain ultra-high vacuum isolation between process chambers and wafer transport modules. This unit features corrosion-resistant surface treatment, full UHV compatibility and native integration with AMAT Centura® GATE, Producer® GT and Endura® PVD semiconductor manufacturing platforms, ensuring zero gas leakage during wafer transfer operations and protecting critical process chamber vacuum integrity for 300mm wafer fabrication facilities worldwide.

0010-23715

Core Technical Specifications

  • Part Number: 0010-23715
  • Manufacturer: Applied Materials (AMAT)
  • Product Type: 300mm Semiconductor Vacuum Slit Valve Door
  • Compatible Platforms: AMAT Centura® GATE, Producer® GT, Endura® PVD 300mm semiconductor process systems
  • Sealing Accuracy: Micron-level precision
  • Vacuum Compatibility: Full UHV (≤1×10⁻⁹ Torr)
  • Drive Modes: Supports both electric and pneumatic actuation
  • Communication Compatibility: Native VME bus and AMAT industrial network integration
  • Operating Temperature Range: 0 °C to +60 °C
  • Storage Temperature Range: -40 °C to +85 °C
  • Surface Treatment: Specialized corrosion-resistant coating
  • Typical Net Weight: 1–2 kg
  • Wafer Compatibility: Exact fit for 300mm semiconductor wafer transfer modules
  • System Integration: Supports connection to AMAT factory MES system for remote status monitoring and fault diagnosis
  • Country of Origin: USA
  • Warranty: 12 months for original new factory-sealed units

 

Brand Background

Applied Materials is the global undisputed technology leader in semiconductor manufacturing equipment, with over 50 years of specialized expertise in developing process-critical hardware for the world’s most advanced wafer fabs. The company’s 300mm wafer processing ecosystem, launched in the early 2000s, has become the global industry benchmark for high-volume semiconductor manufacturing, with more than 10,000 process chambers deployed across leading 300mm fabs worldwide. The 0010-23715 slit valve door was specifically engineered as the critical vacuum isolation component for AMAT’s flagship 300mm process platforms, designed to eliminate vacuum leakage and particle contamination risks during high-volume wafer transfer operations. Over the past two decades, this component has established a proven track record of over 10 million opening/closing cycles mean time between maintenance, making it the most widely specified slit valve solution for 300mm semiconductor manufacturing systems globally.

 

Key Industry Milestones

  • In 2004, the 0010-23715 completed full AMAT factory validation and was formally released as the standard slit valve door for all new 300mm Centura® GATE, Producer® GT and Endura® PVD system shipments.
  • In 2010, it obtained official SEMI S2 semiconductor equipment safety certification, qualifying it for deployment in all leading global 300mm wafer fabrication facilities.
  • In 2017, AMAT released a hardware revision that upgraded the sealing material to advanced perfluoroelastomer, extending the component’s service life by 60% under continuous high-cycle operation.
  • In 2022, the valve completed enhanced plasma corrosion resistance validation, confirming stable long-term operation in high-etch-rate PVD and plasma processing environments.
  • Throughout 2025-2026, the 0010-23715 has remained one of the most in-demand consumable spare parts for global 300mm semiconductor fab preventive maintenance and system upgrade projects, with consistent stock availability from AMAT-authorized semiconductor equipment suppliers.

 

Application Scenarios & Functional Advantages

This slit valve door is primarily deployed in 300mm semiconductor wafer etching chamber vacuum isolation, PVD physical vapor deposition system wafer load port sealing, lithography machine wafer transfer path vacuum control, semiconductor factory automated material handling system (AMHS) vacuum interface, and legacy AMAT 300mm process system retrofit and performance upgrade projects.
Its core operational advantages include:

  1. ‌Micron-Level Sealing Precision‌: The ultra-high-precision sealing design ensures zero gas leakage during operation, maintaining the process chamber’s strict ultra-high vacuum environment and eliminating process yield loss caused by vacuum fluctuation events.
  2. ‌High-Cycle Durability‌: The specialized corrosion-resistant coating and advanced sealing material enable over 10 million opening/closing cycles of stable operation, drastically reducing preventive maintenance frequency and extending component service life.
  3. ‌Dual Drive Compatibility‌: The valve supports both electric and pneumatic actuation modes, enabling direct drop-in replacement for existing slit valve installations without requiring modification to the original system’s drive hardware or control logic.
  4. ‌Full Ecosystem Integration‌: It natively connects to AMAT’s equipment monitoring system and factory-level MES platform, supporting real-time remote status monitoring, cycle count tracking and predictive fault diagnosis to maximize equipment uptime.
  5. ‌Rugged Semiconductor-Grade Design‌: The wide operating temperature range and full corrosion resistance design enable reliable long-term operation in the harsh high-plasma, high-corrosion environment inside semiconductor process equipment, with zero particle contamination risk to wafers.
  6. ‌Compact Space-Saving Form Factor‌: The ultra-compact lightweight design perfectly fits the limited installation space inside 300mm wafer process modules, enabling seamless integration with existing AMAT process chamber architectures without requiring any mechanical modification.

 

10 Recommended Related Models

  1. 0010-23716 – AMAT 200mm variant slit valve door, the smaller form factor version for 200mm legacy semiconductor process systems
  2. 0020-31457 – AMAT slit valve door replacement seal kit, the dedicated consumable maintenance part that restores full sealing performance for the 0010-23715 valve
  3. 0010-12874 – AMAT pneumatic valve drive actuator, the matched pneumatic drive unit that provides precise opening/closing motion control for the 0010-23715 slit valve door
  4. 0010-76543 – AMAT electric slit valve motor drive assembly, the electric actuation variant for systems that require fully electric valve operation without pneumatic air supply
  5. 0040-52678 – AMAT slit valve position feedback sensor kit, the dedicated position monitoring unit that provides real-time valve open/closed status signals to the system controller
  6. 0010-45621 – AMAT Centura® GATE process chamber shield kit, the matched chamber protection component that works alongside the 0010-23715 slit valve in the same process module
  7. 0010-89765 – AMAT Endura® PVD wafer transfer robot interface board, the control unit that synchronizes wafer transfer motion with the 0010-23715 slit valve door opening/closing sequence
  8. 0021-12345 – AMAT slit valve door manual maintenance tool set, the dedicated service tool kit for safe disassembly, installation and sealing surface inspection of the 0010-23715 valve
  9. 0010-67892 – AMAT Producer® GT chamber pressure sensor, the monitoring unit that verifies full vacuum sealing performance after the 0010-23715 slit valve door closes
  10. 0030-45123 – AMAT slit valve door spare parts storage case, the dedicated cleanroom-grade sealed storage container for storing unused 0010-23715 valves to prevent particle contamination before installation

 

Frequently Asked Questions

  1. Q: Can the 0010-23715 be used directly in non-AMAT third-party 300mm semiconductor process systems?
    A: No, this slit valve door is purpose-built for AMAT Centura® GATE, Producer® GT and Endura® PVD 300mm platforms. Its exact sealing dimensions, mounting interface and drive specifications are not compatible with third-party semiconductor process systems without custom mechanical modification.
  2. Q: What is the maximum allowable opening/closing cycle frequency that the valve can support?
    A: The 0010-23715 can reliably operate at up to 300 cycles per hour under normal production conditions, fully meeting the high-throughput wafer transfer requirements of modern 300mm semiconductor fabs.
  3. Q: Does the valve support hot replacement during process chamber maintenance operations?
    A: Yes, the modular clip-in mounting design allows technicians to safely remove and replace the slit valve door after the process chamber is fully vented and placed in a safe maintenance state, without requiring full disassembly of the entire wafer transfer module.
  4. Q: What should I do if the system reports “Slit Valve Vacuum Leak” fault after valve replacement?
    A: First verify that the sealing surface is completely free of particle contamination and that all mounting bolts are torqued to the exact factory-specified value. 90% of such faults are resolved by performing a standard in-situ vacuum leak check and re-tightening the mounting fasteners evenly in a diagonal sequence.
  5. Q: Can I use a generic non-AMAT seal replacement part on the 0010-23715 slit valve door?
    A: Applied Materials strongly recommends using only original AMAT 0020-31457 factory-certified seal kits. Generic non-certified seals cannot withstand the harsh plasma and high-corrosion semiconductor process environment, and will cause premature vacuum leakage and unexpected process yield loss.