Allen‑Bradley 1746‑HSRV SLC 500 Single‑Axis Servo Motion Control Module

Recommended Related Part Numbers

  • 1746‑HSTP1: SLC stepper control module
  • 1746‑HSCE: High‑speed counter / encoder module
  • 1747‑L552: SLC 5/05 processor
  • 1746‑A7: 7‑slot SLC chassis
  • 1746‑A10: 10‑slot SLC chassis
  • 1746‑P4: SLC power supply
  • 1746‑NO4I: Analog output module
Category: Brand:

Description

Allen‑Bradley 1746‑HSRV SLC 500 Single‑Axis Servo Motion Control Module

 

Meta Description

Original Allen‑Bradley 1746‑HSRV single‑axis servo control module for SLC 500, pulse & direction output, encoder feedback, homing and linear moves, discontinued legacy motion module for positioning machines. We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.

1746-HSRV

Product Brief Introduction

The 1746‑HSRV is a single‑slot intelligent single‑axis servo motion controller for the Allen‑Bradley SLC 500 platform. It generates step/direction pulse commands to drive servo amplifiers and accepts incremental encoder feedback for closed‑loop position control. It supports absolute, incremental and speed moves, plus homing routines, with acceleration and deceleration profiling handled onboard, independent of the SLC ladder scan cycle. Motion setpoints and status are exchanged with the SLC CPU via M0/M1 backplane files. This module requires SLC 5/03 (FRN5.0), SLC 5/04 or SLC 5/05 processors. Rockwell has discontinued the 1746‑HSRV with no direct drop‑in replacement; stock is limited for legacy machine maintenance and spare backup. We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.

 

Main Technical Specifications

  • Part Number: 1746‑HSRV
  • Manufacturer: Allen‑Bradley / Rockwell Automation
  • Platform: SLC 500
  • Module Type: Single‑axis servo control module, single slot
  • Compatible Processors: SLC 5/03 (FRN5.0+), SLC 5/04, SLC 5/05
  • Command Output: Step & Direction / CW‑CCW pulse train
  • Feedback: Incremental encoder A/B/Z
  • Motion Functions: Absolute, incremental, speed moves, home search, soft travel limits
  • Pulse Output Frequency: Up to 250 kHz
  • Backplane Current Draw: 220 mA @ 5.1 VDC
  • I/O Points: Home input, overtravel limit inputs, drive enable / fault signals
  • LED Indicators: Power, Fault, Motion, Drive status
  • Operating Temperature: 0 °C to +60 °C
  • Storage Temperature: −40 °C to +85 °C
  • Relative Humidity: 5–95 %, non‑condensing
  • Certifications: UL, cULus, CE
  • Lifecycle Status: Discontinued, no official direct replacement
  • Warranty: 1 year
  • Manual Reference: 1746‑UM613

 

Quality Control Procedure

Each 1746‑HSRV legacy motion module undergoes our specialty QC workflow. We inspect casing, terminal connectors, label authenticity and pin condition. Functional testing includes backplane handshake, pulse output generation, encoder feedback capture, homing sequence execution, limit input and drive fault signal response. We verify acceleration/deceleration profiling and fault reporting. Units passing all motion and signal tests are packed with anti‑static shielding, and test records are retained for traceability. Please note if you submit a quote request: We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.

 

FAQ

Q: What is 1746‑HSRV used for? A: It is a single‑axis closed‑loop servo positioning module for SLC 500, used for cutting, indexing, positioning, pick‑and‑place and registration control.

Q: Can it work with SLC 5/02? A: No. It only supports SLC 5/03 (FRN5.0 or newer), SLC 5/04 and SLC 5/05 processors.

Q: What is the difference between 1746‑HSRV and 1746‑HSTP1? A: HSRV is closed‑loop servo with encoder feedback; HSTP1 is open‑loop stepper control module.

Q: Does it run motion profiles independently? A: Yes. The module executes trajectory profiles on‑board, so positioning performance is not affected by SLC ladder scan time.

Q: Is this module still in production? A: No, Rockwell discontinued the 1746‑HSRV. Stock is limited surplus inventory only.

Q: When will I receive my quotation? A: We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.

 

Installation & Configuration Guide

Insert the 1746‑HSRV into any available slot of a local 1746 chassis. Wire step/direction signals to the servo drive, connect encoder feedback, home switch and overtravel limit sensors. In RSLogix 500, configure motion parameters, travel limits, acceleration/deceleration and homing mode via M0/M1 file mapping. Download the project to the SLC processor, then test jogging, homing and indexed moves. Verify following error and fault reaction logic. Follow Rockwell’s 1746‑UM613 user manual and local electrical safety codes. It is not supported in remote I/O racks.

 

Relevant News & Events

The 1746‑HSRV was a popular low‑cost single‑axis motion solution for SLC 500 packaging and converting machines. As SLC specialty motion modules reach end‑of‑sale, spare stock becomes scarce. Modern migration paths use CompactLogix + Kinetix drives or Compact 5000 pulse‑train motion modules for new equipment. Plants with legacy cut‑to‑length, slitter and indexing machines keep spare HSRV modules to avoid costly line downtime.

 

Application Scenarios & Functional Advantages

Typical Use Cases

  • Cut‑to‑length and flying shear positioning
  • Rotary index table and turret positioning
  • Packaging machine registration and web control
  • Material handling gantry and pick‑and‑place axes
  • Converting, slitting and labeling machine motion control
  • Legacy servo axis spare replacement for SLC 500 systems

Key Advantages

  • On‑board trajectory generation, independent of PLC scan time
  • Closed‑loop encoder feedback for accurate positioning
  • Built‑in homing, soft limits and fault detection
  • High pulse output frequency up to 250 kHz
  • Simple step/direction interface compatible with most pulse‑type servo drives
  • Integrates seamlessly with SLC 5/03, 5/04 and 5/05 controllers
  • Clear LED status indicators for quick troubleshooting

 

Recommended Related Part Numbers

  • 1746‑HSTP1: SLC stepper control module
  • 1746‑HSCE: High‑speed counter / encoder module
  • 1747‑L552: SLC 5/05 processor
  • 1746‑A7: 7‑slot SLC chassis
  • 1746‑A10: 10‑slot SLC chassis
  • 1746‑P4: SLC power supply
  • 1746‑NO4I: Analog output module