Description
Allen‑Bradley 1746‑HSCE SLC 500 High‑Speed Counter / Encoder Module
Meta Description
Original Allen‑Bradley 1746‑HSCE SLC 500 high‑speed counter and quadrature encoder module, max 50 kHz, 4 open‑collector outputs, discontinued legacy specialty module for positioning and pulse measurement. We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.

1746-HSCE
Product Brief Introduction
The 1746‑HSCE is a single‑slot intelligent high‑speed counter module for the Allen‑Bradley SLC 500 PLC system. It interfaces with quadrature encoders, pulse generators and high‑speed discrete sensors, performing independent counting and rate measurement without burdening the SLC processor scan cycle. It supports single‑ended or differential quadrature signals, x2 / x4 counting modes, and provides four open‑collector preset outputs for trigger control. It also calculates pulse frequency (rate) for speed monitoring. Rockwell officially discontinued the 1746‑HSCE effective September 30, 2024 with no direct drop‑in replacement. Stock is limited and mainly for legacy machine maintenance and spare backup. We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.
Main Technical Specifications
- Part Number: 1746‑HSCE
- Manufacturer: Allen‑Bradley / Rockwell Automation
- Platform: SLC 500 (compatible with SLC 5/02 and above)
- Module Type: High‑speed counter / encoder module, single slot
- Max Input Frequency: 50 kHz
- Count Mode: Linear / ring, up / down, quadrature x1 / x2 / x4
- Rate Measurement: Up to 32,767 Hz, configurable period 10 ms – 2.55 s
- Outputs: 4 sink open‑collector preset outputs
- Encoder Supply: 5 VDC or 12 VDC selectable
- Input Filter: 1 μs, 10 μs, 50 μs, 100 μs options for noise suppression
- Backplane Current Draw: 160 mA @ 5.1 VDC
- LED Indicators: Power, Fault, Count, Output status
- Operating Temperature: 0 °C to +60 °C
- Storage Temperature: −40 °C to +85 °C
- Humidity: 5–95 %, non‑condensing
- Certifications: UL, cULus, CE
- Lifecycle Status: Discontinued, End of Sale: Sep 30, 2024; engineering replacement required
- Warranty: 1 year
- Note: Not compatible with 1747‑ASB remote I/O adapter
Quality Control Procedure
Each 1746‑HSCE legacy counter module undergoes our specialty I/O QC process. We inspect housing, terminal block, label authenticity and connector integrity. Functional testing includes backplane handshake, encoder signal simulation, quadrature counting, rate calculation and preset output triggering. We verify filter settings and fault detection functions. Units that pass all counting and output tests are packed in anti‑static packaging with traceability records retained. Please note if you submit a quote request: We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.
FAQ
Q: What is 1746‑HSCE used for? A: It is a high‑speed counter module for reading incremental encoders, measuring position, speed and pulse events for conveyor, rotary indexer and positioning applications.
Q: What is the difference between 1746‑HSCE and 1746‑HSCE2? A: HSCE is single‑channel, max 50 kHz; HSCE2 is multi‑channel, supports up to 4 counters or 2 quadrature encoders with higher frequency capability.
Q: Can it work in remote I/O racks with 1747‑ASB? A: No, the 1746‑HSCE cannot be used with the 1747‑ASB remote I/O adapter; it must be installed in the local chassis.
Q: Does it generate output signals when the count reaches preset? A: Yes, four open‑collector outputs can be triggered by preset count values for cam, limit or motion control.
Q: Is this module still in production? A: No, Rockwell discontinued 1746‑HSCE on Sep 30, 2024. Stock is limited surplus inventory only.
Q: When will I receive my quotation? A: We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.
Installation & Configuration Guide
Insert the 1746‑HSCE into any available slot of a local 1746 chassis. Wire encoder A/B/Z signals and connect the encoder power supply, selecting 5 V or 12 V according to encoder specs. Configure input filter, count mode, preset values and rate period in RSLogix 500 I/O configuration. Download the project to the SLC processor and verify count accumulation, speed value and preset output action. Adjust filter settings to reduce electrical noise if counting jitter occurs. Follow Rockwell’s 1746‑HSCE user manual and local electrical safety standards. Do not install this module in remote I/O racks controlled by 1747‑ASB.
Relevant News & Events
The 1746‑HSCE was a widely used cost‑effective high‑speed counting solution for SLC 500 positioning systems. As SLC 500 specialty modules continue reaching end‑of‑sale, spare stock becomes scarce. Modern migration paths use Compact 5000 I/O high‑speed counter modules with CompactLogix controllers for new machine builds. Factories with older indexers, cut‑to‑length and conveyor systems keep spare HSCE modules to avoid production downtime.
Application Scenarios & Functional Advantages
Typical Use Cases
- Incremental encoder position and speed monitoring
- Cut‑to‑length, indexing and rotary table positioning
- Conveyor speed and product counting
- Packaging machine registration and cam control
- Legacy automation machine motion sensing spare replacement
- Pulse signal acquisition from flow meters and proximity sensors
Key Advantages
- Independent counting, no scan‑time impact on SLC ladder logic
- Quadrature x2 / x4 resolution for high‑precision encoder reading
- Built‑in rate calculation for real‑time speed monitoring
- Four configurable preset outputs for direct trigger control
- Selectable encoder supply voltage and noise input filters
- Simple integration into standard SLC 500 local chassis
- Clear LED status indicators for quick troubleshooting
Recommended Related Part Numbers
- 1746‑HSCE2: Multi‑channel high‑speed counter module
- 1747‑L552: SLC 500 processor
- 1746‑A7: 7‑slot SLC chassis
- 1746‑A10: 10‑slot SLC chassis
- 1746‑P4: SLC power supply
- 845D / 845F: Allen‑Bradley incremental encoders
- 1746‑INT4: Interrupt input module

