Description
Allen‑Bradley 1734‑RTB POINT I/O Removable Screw Terminal Block
Meta Description
Original Allen‑Bradley 1734‑RTB removable screw‑type terminal block for POINT I/O wiring bases, 8‑position, replacement RTB for fast field wiring and module swap without stripping cables. We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.

1734-RTB
Product Brief Introduction
The 1734‑RTB is an 8‑position screw‑clamp removable terminal block for the Rockwell POINT I/O system. It serves as a spare or replacement wiring interface for compatible POINT I/O wiring bases, bringing field sensor and actuator wiring onto the I/O module. Thanks to its detachable design, technicians can pull out the terminal block with all field wires secured, swap the I/O module or base, and lock the RTB back in place without reterminating every single wire. This drastically cuts downtime during maintenance, retrofit and component replacement. It is widely stocked as a service spare for digital input, digital output and many general‑purpose POINT I/O modules. We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.
Main Technical Specifications
- Part Number: 1734‑RTB
- Manufacturer: Allen‑Bradley / Rockwell Automation
- Type: Removable screw terminal block (RTB)
- Terminal Count: 8 positions
- Wire Range: 22 AWG to 14 AWG (0.25–2.5 mm²), solid or stranded copper, rated ≥75 °CRockwell A…
- Termination Style: Screw clamp
- Screw Torque: 0.8 N·m / 7 lb·in
- Compatible Bases: 1734‑TB wiring base assembly
- Compatible Modules: Standard 8‑channel POINT I/O digital I/O and selected analog modules
- Material: Flame‑retardant industrial thermoplastic
- Operating Temperature: 0 °C to +60 °C
- Storage Temperature: −40 °C to +85 °C
- Humidity: 5–95 %, non‑condensing
- Certifications: UL, cULus, CE
- Lifecycle: Active
- Warranty: 1 year
- Origin: ChinaRockwell A…
Quality Control Procedure
Each 1734‑RTB undergoes incoming visual and functional inspection. Our QC team checks housing integrity, screw threads, clamp springs and marking clarity. Samples are fitted onto genuine 1734‑TB bases to verify latching, locking action and reliable electrical continuity after repeated insertion and removal. Units with stripped screws, cracked housings or poor contact retention are rejected. Approved terminal blocks are individually packed and labelled for traceability. If you submit a quote request, kindly note: we operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.
FAQ
Q: What does 1734‑RTB stand for? A: It is a Removable Terminal Block, the screw‑type wiring plug for POINT I/O wiring bases.
Q: Can I keep field wiring intact while replacing the I/O module? A: Yes. You unlatch and pull the RTB out with wires still fastened, swap the module or base, then reinsert the terminal block.
Q: What is the difference between 1734‑RTB and 1734‑RTBS? A: 1734‑RTB uses screw terminals; 1734‑RTBS is spring‑cage push‑in style for faster wiring.
Q: Which base works with 1734‑RTB? A: It mates with the 1734‑TB wiring base assembly. It is not interchangeable with TB3 / TB3S dedicated RTBs.
Q: How many wires can one terminal accept? A: Each terminal accepts a single copper conductor within the specified wire gauge range.
Q: When will I receive my quotation? A: We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.
Installation & Configuration Guide
Wire your field cables into the screw terminals, tighten each screw to the recommended torque, and label every circuit. Hook the end of the RTB opposite the handle into the wiring base, then rotate the block downward until it clicks and locks securely. When removal is needed, lift the release handle and pull the RTB straight out. If you replace an I/O module, leave the wired RTB aside, fit the new module into the keyed base, then reseat the terminal block. Always isolate field power before connecting or disconnecting in hazardous locations to avoid arc risks. After re‑assembly, verify all signal and power connections before energising the station.
Relevant News & Events
As machine builders and maintenance teams reduce planned downtime, removable terminal blocks have become critical service spares for distributed I/O. POINT I/O’s modular RTB concept has been widely adopted across skid packages, allowing rapid component exchange without rewiring. Many system integrators now add spare 1734‑RTB and 1734‑RTBS to their BOM for commissioning and future service. Supply chain instability for Rockwell automation spares has increased demand for verified original terminal blocks from multi‑warehouse suppliers.
Application Scenarios & Functional Advantages
Typical Use Cases
- Spare wiring connector for POINT I/O digital input / output modules
- Machine maintenance and emergency module swap
- Packaging, conveyor and material handling control skids
- Water, wastewater and food & beverage process I/O
- Factory automation retrofit and cabinet expansion
- Panel shop pre‑wiring for fast site commissioning
Key Advantages
- Detachable design preserves field wiring during module replacement
- Robust screw clamping for long‑term vibration resistance
- Standard 8‑pin layout matching most popular POINT I/O modules
- Simple latching handle for quick release and seating
- Low‑cost service spare to minimise production outage
- Fully interoperable with the 1734‑TB base assembly
- Clear labelling area for circuit identification
Recommended Related Part Numbers
- 1734‑TB: POINT I/O wiring base
- 1734‑RTBS: Spring‑cage removable terminal block
- 1734‑TB3: 3‑wire wiring base
- 1734‑IB8: 8‑point digital input module
- 1734‑OB8: 8‑point digital output module
- 1734‑AENT: EtherNet/IP adapter
- 1734‑CAP: POINT I/O backplane end cap
