Allen‑Bradley 1734‑IB8S POINT Guard I/O 8‑Channel Safety Sinking Digital Input Module

  • 1734‑OB8S: POINT Guard I/O safety output module
  • 1734‑IE4S: 4‑channel safety analog input module
  • 1734‑AENTR: Redundant EtherNet/IP adapter
  • 1734‑AENT: Standard EtherNet/IP adapter
  • 1734‑TB / 1734‑TBS: Compatible terminal bases
  • 1734‑IB8SK: Coated conformal variant
  • 1756‑L81S: GuardLogix safety controller
Category: Brand:

Description

Allen‑Bradley 1734‑IB8S POINT Guard I/O 8‑Channel Safety Sinking Digital Input Module

1734-IB8S

Meta Description

Original Allen‑Bradley 1734‑IB8S POINT Guard I/O safety sinking input, SIL 2 / SIL 3 capable, CIP Safety over EtherNet/IP, for GuardLogix safety control systems. We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.

 

Product Brief Introduction

The 1734‑IB8S is a POINT Guard I/O safety digital sinking input module from Rockwell Automation, built for functional safety within the POINT I/O distributed I/O ecosystem. It provides eight safety-rated 24 VDC sinking inputs to interface emergency stops, safety gate switches, light curtains and other safety field devices. Supporting both single‑channel and dual‑channel safety wiring, it communicates via CIP Safety over EtherNet/IP when paired with compatible POINT I/O adapters and GuardLogix controllers. Its compact DIN‑rail footprint enables decentralised safety I/O deployment, consolidating standard automation and safety control on one network. We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.

 

Main Technical Specifications

  • Part Number: 1734‑IB8S
  • Manufacturer: Allen‑Bradley / Rockwell Automation
  • Product Family: POINT Guard I/O Safety Module
  • Channel Count: 8 safety sinking digital inputs
  • Nominal Field Voltage: 24 VDC
  • Input Operating Range: 10–28.8 VDC
  • On‑state Threshold: ≥ 10 VDC; Off‑state Threshold: ≤ 5 VDC
  • Safety Rating: SIL 2 single‑channel; up to SIL CL 3, PLe, Cat.4 in approved dual‑channel pulse‑test configuration
  • Performance Level: PLd (single‑channel); PLe (valid dual‑channel setup)
  • Protocol: CIP Safety over EtherNet/IP
  • Compatible Adapters: 1734‑AENT, 1734‑AENTR, 1734‑AENTRXT
  • Compatible Controllers: GuardLogix 5570 / 5580, CompactGuardLogix 5370 / 5380
  • Backplane Current Draw: 75 mA @ 5.1 VDC
  • Pulse‑Test Diagnostics: 4 integrated test outputs for wiring fault detection (shorts, open circuits)
  • Hot Swap / RIUP: Supported
  • Mounting: Standard DIN rail; requires two valid terminal bases (not 1734‑TB3 / TB3S)
  • Operating Temperature: −20 °C to +55 °C
  • Storage Temperature: −40 °C to +85 °C
  • Humidity: Up to 95 %, non‑condensing
  • Certifications: TÜV, UL, cULus, CE
  • Lifecycle: Active
  • Standard Warranty: 1 year

 

Quality Control Procedure

Every 1734‑IB8S undergoes our dedicated safety‑component QC workflow. Incoming inspection verifies original labelling, casing integrity and part marking. Functional validation includes backplane handshake, channel input detection, pulse‑test diagnostics, fault reporting and stable CIP Safety communication under load. Burn‑in screening runs to expose early failures. After passing all safety‑relevant tests, each unit is sealed in anti‑static packaging and assigned a traceability record. If you submit a quote request, kindly note: we operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.

 

FAQ

Q: What is the purpose of 1734‑IB8S? A: It is a POINT Guard I/O safety sinking input module for connecting safety field devices such as E‑stops, safety gates and light curtains to a GuardLogix safety controller over CIP Safety.

Q: Can it run in dual‑channel safety mode? A: Yes. Dual‑channel wiring with pulse‑test diagnostics enables configurations up to SIL CL 3, PLe, Category 4. Single‑channel mode supports SIL 2 / PLd applications.

Q: Which adapters work with this module? A: It works with 1734‑AENT, 1734‑AENTR and 1734‑AENTRXT EtherNet/IP adapters on the POINT I/O backplane.

Q: Is hot swapping permitted? A: Yes, hot swap (RIUP) is supported when following Rockwell’s official safety installation instructions.

Q: Are special terminal bases required? A: Yes, two matching terminal bases are mandatory; 1734‑TB3 and 1734‑TB3S are not compatible.

Q: When can I receive my quotation? A: We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.

 

Installation & Configuration Guide

Clip the two approved terminal bases onto DIN rail first, then seat the 1734‑ into the base assembly and assemble adjacent POINT I/O modules on the backplane. Wire safety sensors to the input terminals and connect pulse‑test outputs for line diagnostics if required. Supply regulated 24 VDC field power and confirm polarity before energising. Use Studio 5000 Logix Designer with the correct add‑on profile for the module. Add the adapter and safety I/O tree, define safety tag assignments, select single‑channel or dual‑channel mode, set discrepancy timers and enable pulse‑test diagnostics as required for your safety calculation. Download the safety project to the GuardLogix controller, validate each channel’s trigger and fault response, and complete the functional safety verification before commissioning. All work must be performed by competent safety engineers and comply with local machinery and functional‑safety standards.

 

Relevant News & Events

Machinery safety design continues to converge standard control and safety networks on EtherNet/IP and CIP Safety. POINT Guard I/O remains a popular compact safety I/O platform for skid builders, machine integrators and retrofit projects. As end users push for smaller safety footprints and distributed safety architectures, modules such as the 1734‑ are widely specified for modular packaging, material handling and process skids. Global supply volatility for Rockwell safety I/O has increased demand for verified original stock and multi‑warehouse suppliers able to support short lead times on safety bill‑of‑material packages.

 

Application Scenarios & Functional Advantages

Typical Use Cases

  • Machine safety circuits: emergency stop, safety gate, interlock monitoring
  • Safety light curtain and two‑hand control sensing
  • Packaging machinery, conveyors and material handling skids
  • Food & beverage, pharmaceutical machinery safety retrofits
  • Mobile process skids and modular process equipment
  • Robot cell perimeter safety monitoring
  • General industrial machinery requiring SIL / PL rated safety inputs

Key Advantages

  • Compact form factor to save cabinet real estate
  • Dual‑channel capable for high‑end safety up to SIL CL 3 / PLe
  • Built‑in pulse‑test diagnostics to detect wiring shorts and open lines
  • Native CIP Safety integration with GuardLogix safety controllers
  • Hot‑swap capability to reduce downtime during maintenance
  • Seamless coexistence with standard POINT I/O on the same backplane
  • Per‑channel adjustable on / off delay and configurable fault discrepancy time
  • TÜV‑certified functional safety for machinery compliance

 

Recommended Related Part Numbers

  • 1734‑OB8S: POINT Guard I/O safety output module
  • 1734‑IE4S: 4‑channel safety analog input module
  • 1734‑AENTR: Redundant EtherNet/IP adapter
  • 1734‑AENT: Standard EtherNet/IP adapter
  • 1734‑TB / 1734‑TBS: Compatible terminal bases
  • 1734‑IB8SK: Coated conformal variant
  • 1756‑L81S: GuardLogix safety controller