ABB HIEE400995R0002 UM B015 Measurement Interface Module

  1. KUC755AE105 3BHB005243R0105: GUSP gate unit power supply module
  2. UNITROL 1020: ABB static excitation controller
  3. ACS6000: ABB medium voltage drive platform
  4. HIEE series: ABB converter interface & measurement board family
  5. PM864 / PM866A: ABB AC800M DCS processor
  6. S800 I/O: ABB distributed I/O modules
  7. PP885: ABB 800xA operator touch panel
  8. HIEE400xxx: Analog measurement and signal conditioning boards
Category: SKU: ABB HIEE400995R0002 Brand:

Description

ABB HIEE400995R0002 UM B015 Measurement Interface Module

 

Product Overview

HIEE400995R0002 UM B015 is an ABB measurement interface board designed for high-power converter and static excitation control systems, commonly used within UNITROL excitation power stacks and ACS6000 medium voltage drive cabinets. This module serves as an analog signal acquisition interface, responsible for sampling, conditioning and isolation of high-voltage and current measurement signals from the power bridge. It converts raw transducer signals into standardized low-level digital/analog feedback signals for the main controller, providing voltage, current and frequency measurement data for closed-loop regulation and protection logic. With galvanic isolation and built-in signal filtering, it suppresses high EMI noise from power semiconductors. It is widely used as spare replacement component for maintenance, overhaul and retrofit of generator static excitation and medium voltage converter control racks.

HIEE400995R0002 UM B015

Technical Parameters

 

Item Specification
Part Number HIEE400995R0002 UM B015
Manufacturer ABB, Country of Origin: Finland
Series UNITROL / ACS6000 Converter Control Board
Module Type Measurement Interface Module
Signal Type AC voltage, AC current transducer signal acquisition
Signal Isolation Galvanic isolation between high-power side and control electronics
Input Range Custom conditioned analog inputs for power converter transducers
Interface Backplane connector to main control board, status LED indicators
Operating Temperature -20°C ~ +70°C, non-condensing
Storage Temperature -40°C ~ +85°C
Relative Humidity 5% ~ 95% non-condensing
Diagnostics Signal out-of-range detection, hardware self-check
Mounting Sub-board installation inside power cabinet control unit
Weight Approx. 0.38 kg
Certification CE, UL

 

Main Features

  1. Specialized measurement interface board for ABB UNITROL static excitation and ACS6000 medium voltage converter systems.
  2. Conditions and isolates voltage and current feedback signals from power bridge transducers for closed-loop control.
  3. Galvanic isolation design separates high-voltage power circuit and low-voltage control circuit to resist strong electromagnetic interference.
  4. Onboard signal filtering to filter out switching noise generated by IGCT/IGBT power semiconductor devices.
  5. Detects signal loss, over-range and abnormal measurement values, feeds diagnostic status back to master controller.
  6. Compact PCB design for installation inside converter or excitation cabinet, easy replacement during maintenance.
  7. Provides accurate real-time measurement data for excitation regulation, current limiting and power protection functions.
  8. Wide operating temperature range, designed for continuous 24/7 operation in high-power power electronic cabinets.
  9. Works cooperatively with gate power supply and gate drive boards (such as KUC755AE105) in the same power stack.
  10. OEM spare measurement board for generator static excitation and medium voltage variable frequency drive cabinet maintenance, spare inventory and legacy system retrofit projects.

 

Application & Industry Scenarios

Application Information

HIEE400995R0002 UM B015 receives raw analog signals from current and voltage transducers mounted on the power converter bridge. It conditions, filters and electrically isolates these measurement signals, then transmits standardized feedback signals to the main controller. The controller uses these measurements to perform closed-loop excitation control, current regulation and overcurrent/overvoltage protection. This board is a critical signal front-end component in UNITROL generator static excitation cabinets and ACS6000 medium voltage drives, ensuring precise and reliable measurement for high-power converter control.

Typical Industries

  • Combined-cycle & thermal power plant generator static excitation cabinets
  • Petrochemical medium voltage large variable speed drive control systems
  • Metallurgy heavy rolling mill medium voltage converter control
  • Waste heat recovery power generation excitation control systems
  • Marine medium voltage propulsion drive and generator excitation
  • Heavy industry high-power converter cabinet spare parts replacement & overhaul

 

Matching / Supporting Components

  1. Power voltage/current transducers for the converter power stack
  2. ABB main converter control board
  3. KUC755AE105 gate unit power supply module
  4. UNITROL excitation controller module
  5. 24VDC auxiliary power supply for control electronics
  6. Shielded transducer signal cables
  7. ABB commissioning and diagnostic software for power converters
  8. Other HIEE series interface and feedback boards

 

Related ABB Reference Models

  1. KUC755AE105 3BHB005243R0105: GUSP gate unit power supply module
  2. UNITROL 1020: ABB static excitation controller
  3. ACS6000: ABB medium voltage drive platform
  4. HIEE series: ABB converter interface & measurement board family
  5. PM864 / PM866A: ABB AC800M DCS processor
  6. S800 I/O: ABB distributed I/O modules
  7. PP885: ABB 800xA operator touch panel
  8. HIEE400xxx: Analog measurement and signal conditioning boards