Description
ABB 5SHX2645L0002 (3BHB012961R0001) Reverse Conducting IGCT Power Semiconductor Module
Product Overview
The 5SHX2645L0002, with ABB order code 3BHB012961R0001, is a high-power reverse-conducting Integrated Gate-Commutated Thyristor (IGCT) module from ABB’s 5SHX series. This press-pack power device integrates the IGCT chip, freewheeling diode and gate drive circuit on a single assembly. It is the core high-voltage power switching component designed for ABB ACS6000 medium voltage drives and synchronous frequency converters (SFC). Controlled via optical fiber gate signals, it delivers fast, snubberless turn-off capability, low conduction loss and high surge current withstand capacity for megawatt-class power conversion systems. Water cooling is required for continuous heavy-duty operation.

5SHX2645L0002/3HB012961R0001
Technical Parameters
| Item | Specification |
|---|---|
| Part Number | 5SHX2645L0002 |
| ABB Order Code | 3BHB012961R0001 |
| Manufacturer | ABB |
| Device Type | Reverse Conducting IGCT (RC-IGCT), Press-pack |
| Rated Repetitive Peak Off-state Voltage | 4500 V |
| Continuous RMS Current | 2600 A (water-cooled) |
| Non-repetitive Surge Current | 8000 A /10ms |
| Gate Control Interface | Fiber optic trigger |
| Cooling Method | Deionized water cooling |
| Mounting | Press-pack clamped installation |
| Operating Junction Temp | -40°C ~ +125°C |
| Package | Integrated assembly with gate driver PCB |
| Compatible System | ACS6000 MV Drive, SFC Synchronous Frequency Converter |
Main Features
- Reverse-conducting IGCT integrating power thyristor and freewheeling diode, reduces component count and system footprint.
- Snubberless turn-off capability, simplifies power circuit design and lowers auxiliary component cost.
- Fiber-optic gate command input provides galvanic isolation, strong immunity to high voltage EMI noise.
- Ultra-low conduction loss, high power density for large medium-voltage power converters.
- Press-pack construction, high thermal cycling endurance and high short-circuit current tolerance.
- Integrated gate drive board, pre-tested assembly for direct cabinet installation.
- Optimized for water-cooled high-power converter stacks for continuous industrial operation.
- Fast switching response, supports high-power four-quadrant energy conversion.
- Built-in device monitoring and fault feedback via optical signal for converter protection logic.
- Standard spare part for ABB ACS6000 and SFC high-power variable speed drive systems.
Application & Industry Scenarios
Application Information
This IGCT module acts as the main power switch inside medium voltage converter stacks. It performs DC-AC inversion, AC-DC rectification and bidirectional power flow control. It receives optical trigger commands from the converter control unit to turn on/off, regulating output voltage and frequency for large motors. It handles energy conversion and fault current interruption for high-power drive systems.
Typical Industries
- Large medium-voltage variable speed drives for heavy industry
- Metallurgy rolling mill main motor drives
- Mining large conveyor & crusher motor control
- Oil & gas large compressor and pump drives
- Power plant synchronous motor starting via SFC
- Marine high-power propulsion converters
- Renewable energy grid-tied high-power converters
Matching / Supporting Components
- Water cooling manifold & deionized water cooling system
- Gate fiber optic cables for trigger and fault feedback
- Snubber capacitors and clamping hardware for press-pack stack
- ACS6000 converter control board and fiber interface unit
- Voltage / current measurement sensors for converter protection
- Converter cabinet backplane and busbar assemblies
- ABB Drive control software and fault diagnostic tool
Related ABB IGCT Reference Models
- 5SHX2645L0004 (3BHL000389P0104): 4.5kV /2600A RC-IGCT variant
- 5SHX1960L0006: 6kV class IGCT for high voltage SFC
- 5SHX1445H0001: 4.5kV 1400A RC-IGCT
- 5SHY3545L0010: Asymmetric IGCT for higher power stacks
- 3BHB012961R0001: Order code for 5SHX2645L0002
- ACS6000: ABB medium voltage drive platform
- SFC: Synchronous Frequency Converter system
- 5SNA series: ABB high-power IGBT modules

