Description
151X1233DD01SA02 — GE (General Electric) Wind Turbine Pitch Battery Charger Sub-Assembly (OEM 109W6931P001)

151X1233DD01SA02
Brand & Model Title
GE 151X1233DD01SA02 — Wind Turbine Pitch System Battery Charger Sub-Assembly (GE Power & Water / GE Wind), Cross-Reference GE OEM Part 109W6931P001, for GE ~1.5 MW Wind Turbine Pitch Control Cabinets
The 151X1233DD01SA02 belongs to the GE 151X wind-control board/sub-assembly series (“1233DD01” hardware design, “SA02” revision/configuration). It is the pitch-battery charger of GE wind turbine pitch control systems: it continuously charges and maintains the emergency backup battery banks (sealed lead-acid / VRLA) that power blade pitch drives, guaranteeing that blades can feather safely during grid loss, controller fault or emergency shutdown — a fail-safe function in the turbine’s safety chain. Some field references also associate the assembly with the internal control board IS200AEPBH1B and describe hub-side power conditioning duty within the pitch cabinet.
Main Technical Specifications
| Parameter | Value |
|---|---|
| Product type | Pitch battery charger sub-assembly (wind turbine pitch system component) |
| Manufacturer | General Electric (GE Power & Water / GE Wind) |
| Model nomenclature | 151X = GE wind/power-conversion board series; 1233DD01 = hardware design; SA02 = revision/feature configuration |
| OEM cross-reference | 109W6931P001 (also cited: 109W8937G002) |
| Application | GE wind turbine pitch control backup battery systems (Mark VI/VIe wind control environment; ~1.5 MW class machines) |
| Function | Float/boost charging and maintenance of SLA/VRLA pitch emergency batteries; monitoring of charge current, terminal voltage and temperature; overcharge/thermal-runaway prevention |
| Input | Industrial AC feed, 115/230 V AC nominal, 50/60 Hz (some listings cite wide-range 85–265 V AC) |
| Output | Regulated DC charging output (listings vary: 24 V DC / up to 10 A, or 12 V DC / 2 A class) |
| Battery chemistry | Sealed lead-acid (SLA) / valve-regulated lead-acid (VRLA) |
| Protections | Overcurrent, overvoltage, short-circuit, reverse-polarity; conformal-coated PCB for humidity/particulates |
| Environment | Operation ≈ −20…+60 °C (some listings −40…+70 °C); storage −40…+85 °C; high vibration tolerance for hub/cabinet duty |
| Mounting | Pitch control cabinet panel / sub-rack mount; natural convection cooling |
| Status indication | LED charging/fault indicators |
| Lifecycle | Legacy/OEM spare market; supplied as new-in-box or tested surplus with third-party warranties |
⚠️ Note on specification spread: distributor listings disagree materially on output rating (12 V/2 A vs 24 V/10 A), input range, ingress protection (IP20 vs IP65), weight (1.0–2.3 kg) and dimensions — these units circulate through reseller channels without a public GE datasheet, so the values above mark the range and the exact ratings of your specific unit must be confirmed from its nameplate and the turbine’s OEM parts list before procurement.
Typical Applications
- GE wind turbine pitch backup power — keeping pitch emergency batteries at full readiness for blade feathering during grid outages, low-voltage ride-through events and emergency stops
- Pitch cabinet maintenance and retrofits — direct-form-factor replacement in GE pitch control cabinets without wiring modification
- Fleet spare programs — wind-farm operators typically stock one spare charger per ~10 turbines to avoid extended downtime on charger failure
- Backup power in GE control environments — secondary use in industrial automation where the battery bus and interface match (compatibility to be verified for non-GE installations)
Related News & Events
- No public OEM datasheet: GE does not publish a public datasheet for the 151X wind-control sub-assembly series; all circulating specifications come from reseller documentation, which explains the wide spec spread and the frequent AI-generated content attached to this part number (e.g., descriptions as an “AC/DC power supply module for AF-600/MV drives” or a “hub power converter driving the pitch motor” — treat these with caution; the consistent identity is the pitch battery charger sub-assembly, OEM 109W6931P001).
- Safety-critical classification: because a failed charger can silently leave pitch batteries discharged, field-maintenance practice treats it as a critical safety part — the pitch controller will flag charge-fault/low-battery alarms, and periodic output-voltage testing (calibrated DMM across battery terminals) is recommended at annual maintenance cycles.
- Revision discipline: the “SA02” suffix indicates a specific hardware/feature configuration; earlier/later revisions (SA01, SA03) appear on the market and may differ in surge tolerance, current capability, connector pinout and harness configuration — match the full part number including suffix for drop-in replacement.
- Sourcing channels: the part is supplied through legacy-component distributors (new-in-box, new-surplus and tested units, typically 12-month dealer warranties, same-day dispatch on in-stock items); buyers should demand serial traceability, date-code photos and authenticity documentation, as the number attracts fabricated listings.
- Replacement practice: LOTO the AC supply and disconnect the battery bank before handling; use ESD precautions; verify battery type/capacity compatibility, input polarity and connector pinout against the installed revision; test simulated power-loss feathering capacity after replacement.


