Description
140XTS00500 — Schneider Electric Modicon Quantum Field Power Connector (7 Pins, for 140CPS Power Supply Modules)

1440-VSE02-01RA
Brand & Model Title
Schneider Electric 140XTS00500 — Modicon Quantum Field Power Connector, 7 Pins, for Quantum Power Supply Modules
The 140XTS00500 is the field power connection accessory of the Modicon Quantum platform: a 7-pin connector that terminates the incoming field power wiring and mates with the 140CPS series rack power supply modules. It is the standard interface through which cabinet power (115/230 V AC or 24 V DC feeds, depending on supply type) is wired to the Quantum power supply, making it a mandatory accessory at initial rack assembly and a frequently needed spare during supply replacement.
Main Technical Specifications
| Parameter | Value |
|---|---|
| Product type | Field power connector (connection accessory) |
| Platform | Modicon Quantum automation platform |
| Accessory category | Connection accessories |
| Destination | Modicon Quantum power supply modules (140CPS series) |
| Pin count | 7 pins |
| Compatible power supplies | 140CPS11100, 140CPS11420, 140CPS12420, 140CPS21100, 140CPS21400, 140CPS22400, 140CPS41400, 140CPS42400, 140CPS51100, 140CPS52400 |
| Product weight | 0.15 kg |
| IP degree | IP20 (indoor, installed in protective cabinet) |
| Sustainability | Green Premium™; RoHS compliant; REACh SVHC-free; product environmental profile and end-of-life instructions available |
| Marine certification | Covered by Quantum platform marine certificates — RINA, ABS, LR, RMRS, BV, DNV-GL |
| GTIN / EAN | 3595860024510 |
| Package | 1 unit, PCE; package 15 × 10 × 2.5 cm, ~41 g |
| Warranty | 18 months (contractual) |
| Origin | France |
Typical Applications
- Power-supply field wiring — terminating the incoming AC/DC field power feed at the 140CPS power supply module in every Quantum rack (main, local expansion, remote RIO drop)
- Power supply replacement — during swap-outs, the field wiring stays on the connector, so the new supply plugs in without re-terminating conductors
- New rack assembly — one connector per power supply; ordering supplies without the connector is a classic commissioning delay
- Marine and offshore installations — supported by the Quantum platform’s class certificates (DNV-GL, ABS, LR, BV, RINA, RMRS)
- Legacy fleet maintenance — small, low-cost, high-impact spare: a failed or missing power connector can idle an entire rack
Related News & Events
- Lifecycle status: no discontinued/end-of-service banner appeared on the official se.com product page at the time of writing — unlike most 140-series electronic modules, this passive accessory has not surfaced in the widely published 2022–2026 discontinuation lists. However, as part of the Quantum 140 accessory family it will follow the platform’s phase-out; confirm the current lifecycle status on se.com before volume procurement.
- Quantum platform sunset context: with Quantum power supplies (140CPS series) themselves discontinued and X80/M580 migration underway, the 140XTS00500 is increasingly a maintenance-era spare for installed bases; the X80 platform uses different power and connection accessories (BMX/BME series), so it is not a substitute.
- Procurement notes: verify the connector against the power supply model in use — the 7-pin 140XTS00500 covers the listed 140CPS family; marine projects should request the relevant class certificates (available on the se.com document page).
- Field caution: some third-party listings describe this part as a 12-terminal power distribution module, a 7-point I/O terminal strip, or attribute electrical ratings (60 A, 24 VDC, DIN rail) to it. These descriptions are inaccurate AI-generated listings — the authoritative classification is the 7-pin field power connector for Quantum power supply modules.

