Description
Yaskawa CIMR-HB4A0450ABC High-Performance Industrial Inverter
Product Overview
The Yaskawa CIMR-HB4A0450ABC is a robust, high-performance variable frequency drive engineered specifically for demanding industrial motion control applications. Built to deliver reliable, energy-efficient motor regulation across heavy-duty operating conditions, this unit supports both induction and permanent magnet synchronous motors, enabling maximum energy savings while facilitating compact mechanical system design. Its advanced embedded features eliminate the need for extensive external peripheral devices, simplifying system architecture and reducing overall installation footprint.
Technical Specifications
- Input Power: Three-phase 380V to 480V AC
– Rated Output Power: 45kW
– Control Modes: V/f control, open-loop vector control
– Communication Interfaces: Modbus protocol, RS485 serial port
– Design Feature: Compact, space-saving form factor
– Operational Advantages: High efficiency with low energy consumption, integrated multi-layer protection functions for safe continuous operation
– Maintenance Characteristic: Modular construction for simplified on-site inspection and component replacement
– Built-in Functions: Speed search capability to automatically align free-running motors to set frequency without speed detectors; over-excitation braking function that cuts deceleration time by approximately 50% during emergency stops without requiring external braking resistors
Related Yaskawa Model Recommendations
1. Yaskawa CIMR-HB4A0370ABC – 37kW heavy-duty inverter for medium-load industrial conveyor systems
2. Yaskawa CIMR-HB4A0550ABC – 55kW high-torque drive for large material handling equipment
3. Yaskawa CIMR-HB4A0750ABC – 75kW variable frequency drive for heavy process pump applications
4. Yaskawa CIMR-HB4A0900ABC – 90kW high-capacity inverter for large-scale industrial fan systems
5. Yaskawa CIMR-VB4A0031FAA – 15kW compact V-series drive for standard automation production lines
6. Yaskawa CIMR-VB4A0038FAA – 18.5kW general-purpose inverter for packaging machinery
7. Yaskawa CIMR-G7A4045 – 45kW legacy G-series high-performance drive for retrofitting existing motion systems
8. Yaskawa CIMR-EB4A0088ABA – 45kW E-series energy-saving inverter for HVAC and water treatment facilities
Compatibility Notes & Common Installation Pitfalls
- Motor Compatibility: Fully compatible with standard 3-phase induction motors and Yaskawa permanent magnet synchronous motors; confirm motor nameplate current rating does not exceed 120% of the inverter’s rated output current before commissioning
– Signal Interference Risk: Avoid routing RS485 communication cables parallel to high-power motor power lines within the same cable tray, as this may introduce signal distortion and unstable parameter communication
– Grounding Requirement: Never share the inverter grounding terminal with welding equipment or high-power frequency conversion loads; independent dedicated grounding is mandatory to prevent EMC-related faults
– Heat Dissipation Clearance: Maintain a minimum 100mm vertical clearance above and below the unit, and 50mm horizontal clearance on both sides; obstructed ventilation will trigger over-temperature protection and unexpected shutdowns
– Braking Circuit Configuration: For applications requiring frequent emergency stops, do not omit the recommended external braking resistor even though the over-excitation braking function is embedded, to prevent DC bus overvoltage faults during repeated high-load deceleration cycles
Standard Operating Procedure
1. Pre-power-on inspection: Verify all power, motor and communication wiring matches the wiring diagram, confirm no short circuits on output terminals, and ensure all protective covers are securely fastened
2. Parameter initialization: Restore factory default settings via the keypad, then input motor nameplate parameters including rated voltage, rated current, rated frequency and number of poles
3. Auto-tuning execution: Perform stationary or rotational motor auto-tuning to establish accurate motor control parameters for optimal vector performance
4. Function configuration: Set acceleration/deceleration time, communication station address, protection thresholds and application-specific logic functions according to on-site process requirements
5. No-load test: Disconnect the motor mechanical load, run the drive at low speed to confirm rotation direction, current stability and no abnormal noise or vibration
6. Load commissioning: Gradually apply full mechanical load, verify speed regulation accuracy, braking performance and communication data stability across full operating speed range
7. Post-commissioning documentation: Save the complete parameter set to a backup keypad or external storage device for rapid system restoration in future maintenance scenarios
Typical Application Scenarios
- Heavy-duty material conveyor systems in mining and bulk material handling facilities
– Large centrifugal fans and water pumps in industrial HVAC and water treatment plants
– Extruders and mixing machinery in plastic and chemical processing lines
– Gantry cranes and hoisting equipment in port logistics and steel manufacturing workshops
– High-power machine tool spindle drives in heavy machining workshops
– Centralized motion control systems in automated packaging and palletizing production lines
Recommended Supporting Components
- Yaskawa SI-N3 Modbus communication option card for extended industrial network connectivity
– Matching external braking resistor unit for high-frequency emergency stop operating conditions
– Input AC line reactor to suppress power grid harmonic interference and protect the drive from voltage spikes
– Output sinusoidal filter to reduce motor cable high-frequency loss and extend motor insulation service life
– Yaskawa dedicated keypad with parameter copy function for fast on-site configuration and backup
– IP20-rated sealed installation enclosure for dust and moisture protection in harsh industrial environments (AI生成)

