Vibro-Meter (Meggitt) VM600 CPUM 200-595-100-01 Machinery Protection CPU Module

  1. 200-595-100-014: CPUM newer revision variant
  2. MPC4 200-510-071-113: vibration protection processor card
  3. IOC4T 200-560-000-113: Rear I/O communication card
  4. IOC16T 200-565-000-013: 16-channel analog input module
  5. IRC4: relay interface card for trip outputs
  6. RPS6U 200-528-500-013: rack power supply
  7. AMC8: Analog measurement module for
  8. CPUR: Redundant CPU variant for high availability racks
  9. UVV694: auxiliary monitoring card
  10. IQS450: signal conditioning module
Category: SKU: VIBRO-METER-SEALED Brand:

Description

Vibro-Meter (Meggitt) VM600 CPUM 200-595-100-01 Machinery Protection CPU Module

 

Product Title

Vibro-Meter VM600 CPUM 200-595-100-01 | Central Processing Unit Module for VM600 Rack Machinery Protection & Condition Monitoring System

 

Product Description

The VM600 CPUM 200-595-100-01 is the core rack CPU controller for the Vibro-Meter VM600 modular machinery protection system (MPS) and condition monitoring system (CMS). It collects real-time vibration, shaft speed, displacement and temperature data from VM600 I/O modules, executes protection alarm logic, threshold comparison and fast trip processing for rotating equipment. This module handles rack-wide data management, local diagnostics and bi-directional communication with DCS, SCADA and plant HMI. It supports redundant CPU configuration for high-availability turbine protection applications. Onboard continuous self-diagnostics monitor bus integrity, memory, power and IOCN communication faults. The CPUM is hot-swappable, minimizing downtime for maintenance replacement. It meets SIL2 certification under IEC 61508 and complies with API 670 machinery protection standards for turbomachinery.

 

Technical Specifications

 

Item Parameter
Brand Vibro-Meter (Meggitt Sensing Systems)
Model CPUM, Part No. 200-595-100-01
Module Type Rack Central Processing Unit (CPUM)
Host Rack ABE04x series 6U rack
Backplane Bus proprietary rack bus, paired with rear IOCN module
Communication Ports Dual Ethernet RJ45, RS232, RS485
Supported Protocols Modbus TCP, Modbus RTU
Power Supply 24 VDC via rack backplane, ±15% tolerance
Power Consumption ≤8 W
Operating Temperature -20°C ~ +60°C
Storage Temperature -40°C ~ +85°C
Relative Humidity 5%–95% non-condensing
Safety Certification SIL2 (IEC61508), CE, API 670 compliant
Hot Swap Supported (with proper protection bypass)
Form Factor 6U front card for rack
Enclosure Rating IP20 when rack-mounted
Diagnostics Bus error, memory checksum, power fault, I/O communication failure, watchdog monitoring
Weight Approx. 360 g

 

Compatibility & Installation Pitfalls

Compatibility

  • Rack: ABE041 / ABE042 6U rack
  • Rear Companion Card: IOCN / IOC4T rear communication node (must be fitted in rear cage behind CPUM)
  • I/O Modules: MPC4, IOC16T, IRC4, AMC8 series I/O cards
  • Configuration Software: RPS / MPS engineering software
  • Redundancy: Supports dual CPUM redundant rack configuration
  • Not compatible: Bently 3500 racks, non- backplanes, older Mk1 without firmware upgrade

Critical Installation Traps

  1. Front CPUM + rear IOCN pairing requirement: The CPUM cannot operate alone. The corresponding IOCN rear card must be installed directly behind the CPUM slot. Missing IOCN results in total rack communication failure.
  2. Hot swap precondition: Hot swap is permitted, but you must bypass machine protection trip logic before removing the active CPUM. Skipping bypass may trigger false machine trips and shutdown.
  3. Firmware revision lock: CPUM firmware must match IOCN and I/O module firmware revision. Mixed firmware revisions create bus handshake failures, missing vibration measurements and unreliable alarm logic.
  4. ESD vulnerability: High-speed signal PCB and memory chips are ESD sensitive. Wear anti-static wristband; avoid touching gold edge connectors and rear pin headers.
  5. Rack ventilation: 6U rack requires adequate airflow. Blocked ventilation causes over-temperature watchdog resets and intermittent vibration data dropout.
  6. Ground loop noise: Ethernet and RS485 field communication cables must use shielded twisted pair with single-point grounding. Multiple earth points introduce common-mode noise and communication timeouts.
  7. Slot assignment lock: CPUM must occupy designated CPU slots. Placing CPUM in standard I/O slots will disable rack bus and protection functions.

 

Standard Operating Procedure (SOP)

  1. Pre-Install Inspection & Risk Assessment Review P&ID and machine protection logic. Prepare ESD kit and RPS software. Inspect CPUM 200-595-100-01 for PCB damage or connector corrosion. Verify firmware revision matches existing rack BOM. Confirm rear IOCN card is available.
  2. Module Insertion Open front rack card cage. Align CPUM with designated CPU slot. Slide fully into position and secure front panel fasteners. Confirm matching IOCN rear card is correctly seated in rear cage.
  3. Network & Bus Wiring Connect Ethernet / RS485 communication cables to front panel ports. Use shielded twisted pair. Perform continuity and insulation test; avoid short to protective earth.
  4. System Configuration Download Launch RPS / MPS engineering software. Add CPUM and all I/O modules to hardware tree, configure vibration thresholds, alarm and trip logic. Download compiled configuration to the rack CPU.
  5. Power-Up & Commissioning Energize rack 24VDC power. Wait for CPU boot and full self-test. Verify front panel LED status. Inject simulated vibration and speed signals to validate alarm, alert and trip response.
  6. Runtime Operation & Diagnostics Monitor vibration data, module health and fault logs via HMI or RPS software. Periodically review diagnostic events for proof test and SIL audit records.
  7. Hot-Swap Replacement Procedure Enable protection bypass for the affected rack. Pull faulty CPUM straight out after releasing fasteners. Insert spare CPUM, lock front panel. Rack automatically synchronizes configuration. Remove bypass and verify all measurement and trip functions.

 

Application Scenarios

  • Steam & Gas Turbine Machinery Protection
  • Compressor Vibration & Shaft Displacement Monitoring
  • Generator Rotor Dynamic Monitoring
  • Pump & Fan Critical Machine Condition Monitoring
  • Petrochemical turbomachinery safety protection
  • Power plant turbine supervision systems
  • Offshore rotating equipment vibration protection

 

Supporting Components

  1. ABE04x 6U Rack
  2. IOCN / IOC4T Rear I/O Communication Node
  3. RPS6U Rack Power Supply Module
  4. RPS / MPS Configuration Software
  5. MPC4 Vibration Protection Module
  6. IOC16T Analog Input Module
  7. IRC4 Relay Output Module for trip signals
  8. Shielded Ethernet & RS485 communication cables
  9. Anti-static wristband and ESD mat
  10. Blank filler panels for unused rack slots

 

Related Model Recommendations (10 Models)

  1. 200-595-100-014: CPUM newer revision variant
  2. MPC4 200-510-071-113: vibration protection processor card
  3. IOC4T 200-560-000-113: Rear I/O communication card
  4. IOC16T 200-565-000-013: 16-channel analog input module
  5. IRC4: relay interface card for trip outputs
  6. RPS6U 200-528-500-013: rack power supply
  7. AMC8: Analog measurement module for
  8. CPUR: Redundant CPU variant for high availability racks
  9. UVV694: auxiliary monitoring card
  10. IQS450: signal conditioning module