Schneider Electric 140DRC83000 — Modicon Quantum Relay Discrete Output Module, 8 Outputs (Form C), 20–250 V AC / 30–150 V DC

Summary: The 140DRC83000 is Quantum’s 8-point Form C relay output module combining changeover flexibility, 5 A / 1250 VA contact capacity, and broad AC/DC voltage acceptance — the preferred choice for changeover logic, direct contactor control, and marine-certified installations within the Quantum platform.

Category: Brand:

Description

Schneider Electric 140DRC83000 — Modicon Quantum Relay Discrete Output Module, 8 Outputs (Form C), 20–250 V AC / 30–150 V DC

140DRC83000

Main Technical Specifications

Parameter Value
Brand / Manufacturer Schneider Electric
Range Modicon Quantum automation platform
Product type Relay discrete output module
Number of outputs 8
Contact form Form C — 1 NO/NC changeover contact per point
Output voltage 20…250 V AC; 30…150 V DC; 5…30 V DC
Addressing 0.5 output word
Max load current 5 A resistive @ 250/30 V AC/DC (at 60 °C); 3 A @ 250/30 V AC/DC; 2 A tungsten (1/4 hp, cos φ = 0.4); 300 mA resistive / 100 mA inductive (L/R = 10 ms) @ 30–50 V DC
Surge current 20 A for 10 ms (capacitive)
Switching capacity 1250 VA resistive
Switching frequency 30 Hz (resistive load)
Response time ≤10 ms (0→1); ≤20 ms (1→0)
Durability Mechanical 10⁷ cycles; electrical 2×10⁵ cycles (5 A, 250 V AC resistive) / 10⁵ cycles (5 A, 30 V DC)
Overvoltage protection Internal varistor, 275 V
Isolation 1780 Vrms AC / 2500 V DC between channels and between channels & bus (1 min)
Bus current requirement 560 mA
Power dissipation 2.75 W + 0.5 W × (points ON)
Local signalling 8 green LEDs (channel status), 1 green LED (bus active), 1 red LED (external fault)
Operating temperature 0…60 °C (storage −40…85 °C)
Weight 0.3 kg
Certifications CE, UL 508, CSA C22.2 No. 142, FM Class 1 Division 2, C-Tick, GOST, GL, ABS, DNV, RINA, RMRS
Warranty 18 months

 

Key Advantages

  • Form C changeover contacts — unlike simple NO output modules, each point offers both normally-open and normally-closed paths, ideal for changeover logic, run/status feedback, and fail-safe circuits
  • High per-point capacity — up to 5 A resistive at 250 V AC, with 1250 VA switching capacity, allowing direct drive of contactors and small motors without interposing relays
  • Universal AC/DC operation — 20–250 V AC and 5–150 V DC ranges cover virtually all plant control voltages
  • Heavy-duty protection — internal 275 V varistor overvoltage protection and 1780 Vrms isolation guard the backplane from field transients
  • Marine & offshore ready — carries GL, DNV, ABS, and RINA certifications, uncommon among standard I/O modules

 

Typical Applications

  • Power & energy / substations — breaker control, changeover circuits, alarm annunciation at 110/125 V DC
  • Oil & gas, petrochemical — valve solenoids, motor starter commands, pump status feedback
  • Marine & offshore installations — certified by DNV/ABS/GL/RINA for shipboard and rig automation
  • Water, infrastructure, discrete manufacturing — contactor drive, lighting, changeover and interlock logic
  • Legacy Quantum spare — plug-and-play replacement in existing Quantum racks, compatible with Unity Pro / EcoStruxure Control Expert

 

Usage Notes

  • Relay outputs suit on/off control, not high-speed tasks (10–20 ms response).
  • For inductive loads, respect the electrical-life deratings listed above and use snubbers where appropriate.
  • Sister products: 140DRA84000 (16-point, Form A, NO only) when changeover contacts aren’t needed; 140DDO35300/140DDO36400 transistor modules for fast, high-cycle switching.