Description
Allen‑Bradley 1734‑MB POINT I/O Module Mounting Base
Meta Description
Original Allen‑Bradley 1734‑MB POINT I/O mounting base for installing POINT I/O modules on DIN rail, forms backplane interconnection for 1734 series. We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.

1734-MB
Product Brief Introduction
The 1734‑MB is the standard mounting base for Rockwell Automation POINT I/O system. It provides mechanical support and electrical backplane interconnection for individual POINT I/O modules, enabling them to link together and communicate along the POINT I/O backplane. Designed for standard DIN rail mounting, this base builds up distributed I/O stations flexibly by connecting one after another. It works with most ordinary digital, analog and communication modules in the 1734 family and is a fundamental building block for assembling custom remote I/O clusters. We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.
Main Technical Specifications
- Part Number: 1734‑MB
- Manufacturer: Allen‑Bradley / Rockwell Automation
- Product Family: POINT I/O
- Type: Module mounting base with backplane interconnect
- Mounting: Standard 35 mm DIN rail
- Backplane Function: Passive electrical interconnection between adjacent POINT I/O modules
- Material: High‑grade industrial thermoplastic, flame retardant
- Operating Temperature: 0 °C to +60 °C
- Storage Temperature: −40 °C to +85 °C
- Relative Humidity: 5% to 95%, non‑condensing
- Shock and Vibration: Meets Rockwell factory automation standards
- Certifications: UL, cULus, CE
- Hot Swap Compatible: Yes when used with matching POINT I/O modules
- Lifecycle: Active
- Warranty: 1 year
Quality Control Procedure
Each 1734‑MB mounting base passes our incoming quality inspection. We check casing condition, lock clips, backplane contact springs and mould integrity. Samples are validated for proper mechanical latching and reliable electrical continuity when mated with genuine 1734 I/O modules. Defective units with loose contacts, cracked housings or broken latches are rejected. Approved bases are packed in anti‑static bags with traceability records retained. Please note if you send a quote request: We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.
FAQ
Q: What is 1734‑MB used for? A: It is a passive mounting base that holds a single POINT I/O module and creates the backplane connection to neighbouring bases.
Q: Does the 1734‑MB include terminal blocks? A: No. 1734‑MB is only the mounting backplane base; separate terminal base variants are required for field wiring terminals.
Q: Can I mix different 1734 modules on a chain of 1734‑MB? A: Yes, standard digital, analog and communication modules can be assembled together as long as total backplane load and module quantity limits are respected.
Q: Is this base DIN rail mountable? A: Yes, it clips directly onto standard 35 mm DIN rail.
Q: Can I hot swap modules installed on 1734‑MB? A: Hot swap is supported for compatible POINT I/O modules following Rockwell’s official operation manual.
Q: When will I receive my quotation? A: We operate 86 shared warehouses globally, so it may take several hours to deliver an accurate quotation; thank you for your understanding, and we will handle your inquiry promptly.
Installation & Configuration Guide
Clip the 1734‑MB firmly onto a 35 mm DIN rail. Link multiple bases side‑by‑side to form a continuous backplane chain. Push a compatible 1734 I/O module into the base until it clicks and locks. If terminal connections are needed, select the corresponding terminal base rather than 1734‑MB alone. After assembly, verify all interlocks are secured and backplane contacts are fully engaged before powering the station. Arrange adapters at the start of the I/O chain and do not exceed the maximum allowed number of modules per adapter.
Relevant News & Events
POINT I/O remains one of the most widely adopted distributed I/O families for modular machinery and skid systems. Many system integrators prefer to separate backplane mounting bases and terminal bases for flexible cabinet layout design. As automation retrofit projects grow, demand for basic infrastructure parts such as 1734‑MB stays steady, since every POINT I/O station relies on these passive bases to build a functional remote I/O cluster.
Application Scenarios & Functional Advantages
Typical Use Cases
- Building custom POINT I/O remote stations
- Packaging machine distributed I/O
- Conveyor and material handling control skids
- Water treatment, food and beverage process skids
- Factory automation retrofit and expansion
- Modular test benches and special‑purpose machinery
Key Advantages
- Simple passive backplane interconnection
- Quick snap‑on DIN rail installation
- Reliable spring contacts for long‑term connection
- Lightweight and compact, saving cabinet space
- Fully interoperable with the complete 1734 POINT I/O range
- Easy rearrangement or expansion of I/O chains
- Low failure rate as a purely mechanical/ passive electrical component
Recommended Related Part Numbers
- 1734‑TB: Standard terminal base
- 1734‑TBS: Spring terminal base
- 1734‑AENT: EtherNet/IP adapter
- 1734‑IB8: Digital input module
- 1734‑OB8: Digital output module
- 1734‑RTB: Removable terminal block
- 1734‑CAP: End cap for POINT I/O backplane

