Description
ABB PFCL201C 20KN Pressductor PillowBlock Magnetoelastic Load Cell
Product Overview
The ABB PFCL201C 20KN (full part number 3BSE023409R20) is a high-performance industrial magnetoelastic force sensor purpose-built for strip tension measurement and high-precision load monitoring in heavy-duty industrial production lines. Leveraging ABB’s patented Pressductor® piezomagnetic measurement technology, it converts applied mechanical force into measurable magnetic permeability changes, eliminating the need for fragile strain gauge elements and physical deformation structures. This design delivers exceptional overload tolerance, strong electrical interference resistance and long-term operational stability, making it the industry-standard tension measurement core for metallurgy rolling mills, continuous processing lines and other critical industrial scenarios.
Technical Specifications
| Parameter Category | Detailed Specification |
|---|---|
| Manufacturer | ABB Group |
| Product Type | Pressductor PillowBlock Magnetoelastic Load Cell |
| Full Part Number | PFCL201C 20KN (3BSE023409R20) |
| Rated Maximum Measurement Load | 20 KN (20,000 N) |
| Core Measurement Principle | Pressductor® piezomagnetic (magnetoelastic) effect, no physical deformation required for force detection |
| Power Supply Requirement | 24V DC ±10% |
| Standard Output Signal | 0–10V DC high-power low-impedance analog signal |
| Measurement Accuracy | ±0.2% FS, long-term drift ≤0.1% per year |
| Operating Temperature Range | -40°C to +85°C, with built-in full-range temperature compensation |
| Mechanical Construction | Machined from a single solid stainless steel block, no internal moving parts |
| Electrical Connection | Industrial-grade cylindrical plug connector, IP65 protection rating for on-site wiring |
| Installation Method | PillowBlock pillow-type fixed mounting, directly installed under the tension roll bearing housing |
| System Compatibility | Fully compatible with ABB PFEA111/PFEA112 series tension signal processing units and AC 800M DCS platforms |
| Overload Tolerance | 300% of rated 20KN load, no permanent damage to the sensor element |
| EMC Performance | High resistance to electrical interference and ground faults, no signal distortion even in high-frequency converter heavy industrial environments |
8 Recommended Related ABB Models
- PFCL201C 5KN – Low-range variant of the same series, optimized for small-tension thin strip production lines with 5KN maximum measurement load
- PFCL201C 50KN – High-range heavy-duty variant, designed for thick plate and heavy-load rolling mill scenarios with 50KN maximum measurement load
- ABB PFEA111-20 – Dedicated tension signal processing unit, the core signal conditioning module paired with PFCL201C 20KN for tension value conversion and output
- ABB PFEA112-65 – Enhanced high-precision tension controller, adding full closed-loop tension regulation function for continuous process lines
- PFCL101A 10KN – Compact small-size magnetoelastic load cell, suitable for limited installation space scenarios that cannot accommodate the PillowBlock structure
- ABB AC 800M Tension Control Function Block – DCS integrated tension control library, enabling seamless data interaction between 20KN and the main automation system
- ABB 3BSE008514R0001 – AI835 isolated analog input module, collecting 0–10V output signal from 20KN into the DCS system
- PFCL301C 100KN – Ultra-heavy-duty large-range magnetoelastic load cell, for heavy metallurgy rolling mill main load measurement scenarios with 100KN maximum load
Compatibility Notes & Critical Installation Pitfalls
- Signal Processing Unit Validation: 20KN cannot output standard 0–10V signals directly to ordinary general-purpose AI modules; it must be paired with dedicated ABB PFEA111/PFEA112 tension processing units to complete signal conditioning
- Installation Orientation Requirement: The sensor must be installed strictly perpendicular to the direction of vertical force; misalignment by more than 5 degrees will cause 10%+ measurement error
- Forbidden Mechanical Impact: Never apply instantaneous impact load exceeding 60KN to the sensor during installation or transportation; this will cause permanent deviation of the internal magnetic circuit characteristics
- Cable Specification Mandatory: Ordinary unshielded cables cannot be used for signal transmission; only ABB-certified dedicated shielded twisted-pair cables guarantee no signal distortion under strong electromagnetic interference environments
- Grounding Isolation Mandatory: The sensor stainless steel housing must be connected to the independent metallurgy equipment dedicated grounding grid; sharing grounding with high-power main drive motors will introduce severe signal noise
- Welding Operation Protection: Never perform electric welding operations on the equipment base with the sensor installed; welding current flowing through the sensor will permanently damage the internal excitation coil
Standard Operating Procedure
- Pre-operation preparation: Fully back up the existing tension system calibration parameters via the PFEA111/PFEA112 configuration software, confirm the tension roll is in a no-load state and all strip materials are completely removed
- Safety isolation: Lock the upstream and downstream production line safety interlock switches, hang a “No Operation” warning sign, confirm the production line is in full stop state and cannot be accidentally started
- Old sensor removal: Loosen the PillowBlock mounting fixing bolts, carefully remove the faulty 20KN from the bearing housing base, avoid damaging the on-site signal cable and connector during operation
- New sensor verification: Verify the new 20KN part number and suffix code, confirm no physical damage exists on the stainless steel housing and cylindrical connector, and the calibration certificate parameters match the original unit
- Installation and positioning: Place the new sensor into the bearing housing mounting base, adjust the orientation to ensure it is strictly perpendicular to the vertical force direction, tighten all fixing bolts to the torque value specified in the official manual
- Wiring and power-on: Reconnect the dedicated signal cable and cylindrical connector, restore 24V DC power, confirm the PFEA111 tension processing unit displays the sensor online with no fault alarms
- Calibration and verification: Perform no-load zero point calibration and standard weight loading calibration, validate the measurement accuracy reaches ±0.2% FS, then perform full production line tension closed-loop test to confirm no tension fluctuation
- Final documentation: Update the equipment maintenance log with the new sensor serial number and calibration date, create a new full tension system parameter backup and store it in two independent offline storage locations
Typical Application Scenarios
- Metallurgy steel cold rolling mill continuous production lines, delivering high-precision strip tension measurement for pickling, annealing and galvanizing process sections
- Non-ferrous metal aluminum foil and copper foil rolling production lines, ensuring ultra-stable tension control for thin strip high-speed rolling processes
- Large-scale papermaking and printing production lines, implementing non-contact high-precision tension monitoring for high-speed web conveying processes
- New energy lithium battery pole piece coating and slitting production lines, providing stable tension control for high-precision thin material processing
- Port heavy-duty crane and hoist load monitoring systems, achieving high-reliability lifting load overload protection for heavy-load handling equipment
- Large-scale textile chemical fiber filament production lines, delivering precise tension measurement for high-speed filament spinning and winding processes
Recommended Supporting Components
- ABB PFEA111-20 dedicated tension signal processing unit, completing signal conditioning, conversion and standard signal output for 20KN
- ABB-certified dedicated shielded twisted-pair tension signal cables, eliminating electromagnetic interference and ensuring long-distance stable signal transmission
- Original ABB official calibration standard weight kit, providing traceable reference for regular sensor accuracy recalibration
- ABB PFEA112-65 enhanced tension controller, adding full closed-loop automatic tension regulation function for continuous process lines
- Industrial-grade ESD anti-static operation kit, protecting the sensor internal excitation coil from electrostatic damage during maintenance
- ABB AC 800M tension control function block library, enabling seamless data integration between 20KN and the main DCS automation system




