Description
ABB DSAI130A (3BSE018292R1) 16-Channel Differential Analog Input Module, S100 I/O for Advant OCS / AC450
Product Overview
DSAI130A is a 16-channel differential analog input card belonging to ABB S100 I/O series for legacy Advant OCS and AC450 (Advant Controller 450) DCS. It collects analog field signals from transmitters (pressure, temperature, flow, level sensors) and converts them into digital data for PM511 CPU processing. Supports differential input for high noise rejection; each channel includes fuse protection. This board is fully discontinued by ABB and only supplied as spare replacement for existing Advant OCS plants.
Key Technical Specifications
- Part Number: DSAI130A, 3BSE018292R1
- Manufacturer: ABB
- Series: S100 I/O, Advant OCS / AC450
- Channels: 16 differential analog input channels
- Signal Types: ±20mA, ±10V
- Resolution: 12-bit ADC
- Accuracy: 0.025%
- Input Mode: Differential (strong anti-interference)
- Channel Protection: Individual per-channel fuse
- Power Supply: 24VDC supplied from S100 subrack backplane
- Mounting: Plug-in module for S100 I/O rack
- Operating Temperature: -20°C ~ +60°C
- Storage Temperature: -40°C ~ +85°C
- Humidity: 5%–95% non-condensing
- Weight: ~0.317 kg
- Diagnostics: Front panel LED indicators for module status, bus communication, channel fault / fuse blown alarm
- Compliance: CE; RoHS exempt legacy industrial board

DSAI130A 3BSE018292R1
Recommended 8 Similar Series Models (S100 / AC450 Family)
- ABB DSAO120A 3BSE018293R1 (8CH Analog Output, previous item)
- ABB DSDI110A 3BSE018295R1 Digital Input Module
- ABB DSDO115A 3BSE018298R1 Digital Output Module
- ABB PM511V16 3BSE011181R1 AC450 CPU
- ABB RF533 3BSE014227R1 AC450 Subrack
- ABB CI630 AF100 Communication Module
- ABB SA811 Power Supply
- ABB CI851 MasterBus300E Interface
Quality Control & Test Standard Operating Procedure (SOP)
- Visual Inspection: Inspect PCB, edge gold fingers, front panel LEDs, terminal connectors and label. Confirm part number 3BSE018292R1; check for corrosion, burnt components or bent pins.
- Continuity Test: Check backplane edge connector pins, power and signal lines for open or short circuit.
- Insulation Resistance Test: Insulation test between 24VDC backplane and each analog input channel.
- Power-Up Functional Test: Insert DSAI130A into rack, apply 24VDC power, verify LED boot sequence, no overheating.
- ADC Calibration Test: Inject precision mA/V signal to each channel, verify reading accuracy and linearity.
- Differential Noise Rejection Test: Verify good common-mode noise suppression for differential input.
- Fuse & Channel Fault Simulation: Simulate channel overcurrent to trigger fuse fault diagnostic alarm.
- Bus Communication Test: Communicate with PM511 CPU, verify field measurement upload and diagnostic status exchange.
- Environmental Burn-in Test: Continuous powered burn-in at rated ambient temperature for early failure screening.
- Final Recheck & Documentation: Repeat channel calibration and communication test, generate serial-number traceable test report before anti-static packaging.
New Module Installation Guide
- Pre-Install Preparation: Execute LOTO lockout-tagout procedure for DCS cabinet. Wear ESD wrist strap. Confirm DSAI130A compatible with PM511V16 and rack.
- Rack Slot Inspection: Inspect subrack backplane gold connectors for oxidation or bent pins.
- Module Insertion: Insert DSAI130A into I/O slot, push fully seated and fasten front retaining screws.
- Field Wiring: Wire each AI channel to field transmitters using shielded twisted pair cable, differential wiring. Follow Advant OCS grounding specification.
- Power Restore: Energize cabinet 24VDC control power. Observe front panel LED status, wait for module initialization and bus link-up.
- Commissioning & Calibration: Connect Advant Builder engineering workstation, configure channel signal range, perform channel calibration.
- Loop Simulation Test: Inject standard mA/V signals, verify DCS reading accuracy and channel fault diagnostics.
- Post-Installation Documentation: Record serial number, channel configuration and calibration data in plant maintenance log.
Application Scenarios & Features
Application Scenarios
- Legacy ABB Advant OCS / DCS for thermal power boiler and turbine control
- Petrochemical, pulp & paper process control for flow, pressure, temperature, level measurement
- Collect analog signals from 4-20mA / ±10V field transmitters
- Spare replacement for failed analog input card in I/O rack
Core Features
- 16-channel differential analog input, excellent common-mode noise suppression
- Supports ±20mA and ±10V field transmitter signals
- 12-bit high precision ADC with 0.025% accuracy
- Individual per-channel fuse protection against field overcurrent damage
- Built-in diagnostics: blown fuse detection, channel fault, communication status
- Plug-in hot-swappable I/O module for rack
- Native integration within ABB Advant OCS / DCS ecosystem

DSAI130A 3BSE018292R1
FAQ
Q1: What is the difference between and DSAO120A?
A1: is Analog Input (AI), reads field sensor signals to DCS. DSAO120A is Analog Output (AO), sends control signal out to valves and actuators.
Q2: Can be hot swapped?
A2: Mechanically hot plug supported. If channels are reading live process measurements, removing the card will lose measurement; replace only in maintenance window.
Q3: What is differential input advantage?
A3: Differential wiring rejects common-mode noise, suitable for industrial plant long cable runs with heavy electrical interference.
Q4: Is SIL certified?
A4: SIL certification applies to the complete safety function, not standalone I/O module.
Q5: What common failures of ?
A5: Channel fuse blown, ADC drift, gold finger oxidation, input circuit damage caused by field overvoltage.
Q6: Is still produced by ABB?
A6: Discontinued. Only new surplus or refurbished spare parts available for existing Advant OCS plant maintenance.
Q7: What controller works with ?
A7: Mainly PM511 series CPU via I/O rack.
Q8: What is DSAI130AK01 / AK02?
A8: DSAI130AKxx is complete kit version, including board + terminal unit DSTA + ribbon cable.




