1440-VSE02-01RA — Rockwell Automation / Allen-Bradley (ENTEK) XM-122 Dual Accelerometer Monitor

Related Product Recommendations

Model Description
1440-VST02-01RA (XM-120)​ Dual velocity monitor
1440-VLF02-01RA (XM-121)​ Dual velocity/acceleration monitor with LF capability
1440-SDM02-01RA (XM-124)​ Signal data module (SDM)
1440-SPD02-01RB (XM-220)​ XM protection relay output module
1440-TB-A (XM-940)​ XM terminal base — mandatory mounting/wiring base
XM-441 chassis (1440-RE…)​ Multi-module XM system chassis
1785/1756 ControlLogix & DeviceNet accessories (1786-TPYR etc.)​ Host controller and network components for Logix integration
Rockwell VS-1000 / newer Condition Monitoring Modernization path for condition monitoring architectures
Category: Brand:

Description

1440-VSE02-01RA — Rockwell Automation / Allen-Bradley (ENTEK) XM-122 Dual Accelerometer Monitor

 

Brand & Model Title

Rockwell Automation / Allen-Bradley 1440-VSE02-01RA — XM-122 Dual Accelerometer Monitor, Dynamix 1440 Condition Monitoring Series (ENTEK heritage)​

The XM-122 is a two-channel dynamic vibration monitor that accepts ICP®/IEPE accelerometer inputs from rotating machinery (motors, pumps, fans, gearboxes, compressors), performs FFT/gSE spectral analysis for early bearing and gear-mesh fault detection, and provides relay alarm/trip outputs plus 4–20 mA retransmission. It integrates into Logix control platforms over DeviceNet, forming part of the XM-441 chassis / XM-940 terminal-base monitoring architecture.

1440-VSE02-01RA

Main Technical Specifications (compiled from Rockwell XM documentation and consistent distributor data)

Parameter Value
Product type Dual-channel accelerometer vibration monitor (XM-122)
Manufacturer Rockwell Automation / Allen-Bradley (ENTEK condition monitoring heritage)
Sensor inputs 2 independent accelerometer channels (ICP/IEPE piezo accelerometers); supports acceleration/velocity measurement modes
Analysis Onboard FFT spectral analysis; gSE (demodulation) capability for early-stage bearing defect detection; programmable bandpass filters
Relay outputs Programmable alarm/trip SPDT relay outputs (alert & danger setpoints per channel)
Analog retransmission 4–20 mA per channel for DCS/PLC value display
Communication DeviceNet interface for direct integration with ControlLogix / CompactLogix; configuration and data via Logix platform
Power supply 24 V DC nominal (approx. 18–32 V range), DIN-rail mounted on XM-940 terminal base (1440-TB-A)
Environment Industrial IP20 module for cabinet installation; typical operation 0…60 °C (distributor claims of −40…+70 °C wide-temp should be verified against the official Rockwell datasheet)
Indicators Front-panel LEDs for power, communication, channel status and alarm states
Configuration Non-volatile memory retains setpoints and configuration; node address setting before power-up

 

Typical Applications

  • Predictive maintenance of rotating assets — motors, fans, blowers, pumps, gearboxes and compressors in power, mining, petrochemical and steel plants
  • Bearing and gear-mesh fault early warning — gSE demodulation catches micro-cracks, lubrication failure and rolling-element wear before total-value alarms trip
  • Machine protection / interlock — relay alert & danger outputs wired into shutdown or interlock logic
  • DCS/PLC condition integration — 4–20 mA retransmission and DeviceNet data feed to SCADA/HMI, third-party DCS gateways
  • Retrofit projects — replacing legacy ENTEK/IRD monitors while keeping existing sensors

 

Related News & Events

  • Brand lineage:​ ENTEK Scientific (UK) pioneered on-line machine monitoring; acquired by Rockwell Automation (1998), its technology became the Allen-Bradley Dynamix 1440 / XM family — hence the frequent mis-labeling as “Schneider” in spare-parts catalogs.
  • Positioning in the Rockwell portfolio:​ the XM-1440 series is the long-standing condition-monitoring line for Logix platforms; Rockwell’s newer IIoT/Condition Monitoring offerings coexist with it, and the XM-122 remains a traded spare for installed XM-441/XM-940 systems.
  • Market caution:​ this reference attracts heavily fabricated listings (random voltages, protocols, even “water pump” descriptions) from reseller sites. Always verify against Rockwell Automation official documentation (publication XM-122-x)​ before purchase.
  • Procurement note:​ the module must be paired with the XM-940 terminal base (1440-TB-A)​ — it cannot be wired or mounted standalone.