ABB PM860K01 3BSE018100R1 PLC Processor Module (In Stock)
Product Description
The ABB PM860K01 (full part number 3BSE018100R1) is a classic high-performance industrial-grade central processor complete kit belonging to the ABB AC 800M distributed control system product ecosystem, natively compatible with the ABB System 800xA DCS platform. As a standard non-redundant CPU kit for mid-to-large scale process control scenarios, it integrates the core CPU board, dedicated baseboard, bus terminals and backup battery in one set, and undertakes core tasks such as real-time process operation, complex logic control, multi-loop regulation and large-scale equipment interlocking. Verified genuine new surplus inventory from certified industrial automation suppliers in Xiamen, Fujian supports 3-day fast delivery after payment, making it a standard core spare part for routine maintenance and fault replacement of in-service ABB AC 800M mid-to-large scale DCS systems.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | ABB |
| Model | PM860K01 |
| Full Part Number | 3BSE018100R1 |
| Product Category | AC 800M Series Classic High-Performance CPU Complete Kit |
| Place of Origin | Switzerland |
| Gross Weight | 1.26KG |
| Kit Contents | PM860 CPU motherboard + dedicated baseboard + CEX bus terminal + ModuleBus terminal + 3.6V data backup lithium battery + power connector + 2A fuse |
| Processor | 32-bit RISC MPC860, 48MHz main frequency |
| Memory Configuration | 16MB RAM (about 7.155MB available for user applications), 2MB Flash firmware storage, 16Kbit EEPROM for hardware configuration and diagnostic parameters |
| Operation Performance | 1000 boolean logic instructions executed in only 0.23ms, minimum task cycle 1ms, maximum 32 parallel application programs |
| Power Supply | 24V DC wide voltage input (19.2V – 30V DC), typical power consumption 6.0W, maximum 10.3W |
| Communication Interfaces | 2× RJ45 Ethernet ports (CN1/CN2, support redundant dual network), 2× isolated RS232 serial ports (COM3/COM4), CEX expansion bus, ModuleBus backplane bus |
| Supported Protocols | 800xA proprietary protocol, Modbus TCP/RTU, OPC UA, Profibus DP, MMS, IAC, CNCP |
| Working Environment | Operating temperature -20°C to +60°C, storage temperature -40°C to +70°C, humidity 5%–95% non-condensing |
| Protection Grade | IP20 |
| Installation Method | Standard DIN rail snap-in installation, support hot-swappable bus modules |
| In-Stock Status | Verified new surplus inventory, 3-day fast delivery from Xiamen/Zhangzhou warehouse |
| Total Supply Quantity | Up to 100 units available in stock |
| Market Reference Price | ¥8095.6–¥15000.00 (single unit, different suppliers have different quotations) |
| Warranty Coverage | 1-2 full years from delivery date |
Key Features and Advantages
- Exclusive AC 800M / 800xA system native adaptation: No additional hardware modification or program adjustment required, it natively matches the ABB AC 800M DCS system architecture, realizing seamless replacement of old faulty CPU modules without modifying the original system configuration, and the system can automatically identify and restore normal operation after power-on.
- Complete kit ready for direct use: The full set of accessories including CPU board, dedicated baseboard, bus terminals and backup battery is pre-configured, no additional parts need to be purchased separately, and it can be directly installed and put into operation after unpacking.
- High-performance industrial-grade processing: Equipped with MPC860 48MHz processor, it can stably run large-scale complex control logic programs, the execution speed of 1000 boolean operations is as low as 0.23ms, and the Modulebus scan rate can reach 1ms, meeting the high real-time control requirements of large continuous production scenarios.
- Industrial-grade high-reliability design: It has full EMC electromagnetic compatibility certification, can resist strong electromagnetic interference from on-site frequency converters and motors, and meets CE and UL industrial standards, stably adapting to harsh working conditions in petrochemical, power and metallurgy industries.
- Powerful modular expansion capability: Through the CEX expansion bus, it can hot-swap and identify various communication modules such as Profibus-DP, Modbus and CANopen, and flexibly expand S800/S900 remote I/O modules, supporting thousands of I/O points in a single station.
- Standard IEC 61131-3 programming support: It supports multiple programming languages such as ladder diagram, function block, structured text and sequential function chart, and can be seamlessly configured with ABB Control Builder M engineering software.
- Sufficient stock and fast delivery: Multiple certified industrial spare part suppliers in Xiamen, Fujian hold up to 100 units of genuine new surplus inventory, supporting 3-day fast delivery after payment, effectively solving the problem of long lead time for scarce spare parts of discontinued EOL ABB legacy AC 800M DCS systems.
- 1-2 year full warranty coverage: Every in-stock unit undergoes 48-hour continuous power-on testing and full control performance calibration before shipment, with a complete 365-730 day warranty covering all non-human-induced hardware failures.
Application Fields
- Core main control unit for ABB AC 800M DCS systems in large oil refinery and chemical plant process control scenarios
- Main processor for large thermal power plant and hydropower station main control systems
- Spare part replacement and maintenance for in-service ABB AC 800M DCS systems in metallurgical, papermaking and cement large-scale production line scenarios
- High-reliability control unit for large pharmaceutical production lines, municipal water treatment plants and large building automation systems
- Upgrade and reliability improvement projects for legacy ABB industrial automation control platforms that pursue high performance
- Real-time process data processing unit for large oil and gas transmission process stations and logistics port automation systems
Related Product Recommendations
- ABB PM861AK02 3BSE018160R1 AC800M CPU Module: Official upgraded replacement model with optimized memory and communication performance, fully software compatible with the original system
- ABB PM866K02 3BSE050199R6 Redundant Processor Unit: Dedicated redundant CPU unit for high-availability fault-tolerant system scenarios that require zero production interruption
- ABB EI803F 10/100Mbps Ethernet Communication Module: Complementary industrial Ethernet expansion unit for upper system data interaction scenarios
- ABB SA801F 220VAC Redundant Power Module: Dedicated redundant power supply unit for AC 800M system control racks
